Designer who needs to restore previous versions
You want to be able to restore a usable architectural model after an error or incident, rather than simply keeping files on a second drive.
Start with a backup setup that lets you actually restore your architectural model. RAID 1 alone isn’t enough, as mirroring is no substitute for a separate backup. Then compare the dimensions, drive requirements and usable capacity with your shelf space and archive. A 2.5GbE port is only relevant if your network equipment and file transfers can make use of it too.
You want to be able to restore a usable architectural model after an error or incident, rather than simply keeping files on a second drive.
You have limited space for the enclosure, so you need to check its depth, connections and placement as well as its width.
You store several projects or versions and want to plan ahead for the usable storage capacity and backup transfer speeds you’ll need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Restorable backup | Check for scheduled backups, a second backup destination and whether a test restore of the model succeeds. | If I need to restore my project files after an error, I don’t want to rely on drive mirroring alone. Around 29% of consumers put restorability first. |
| Fits on the shelf | Measure the width and depth, and allow for connections, cables and ventilation space too. | If my shelf has limited space, I want to make sure the whole enclosure will fit, rather than judging by its width alone. Around 29% of consumers prioritise physical fit. |
| Usable archive space | Make a list of your projects and the version history you want to keep; calculate the capacity available with your chosen drive configuration. | If I want to keep several projects and versions, I need to know how much storage will remain usable after mirroring, if applicable. Around 24% of consumers put archive space first. |
| Transfer time | Check the network ports on the NAS, computer and other equipment, then test with representative project files. | If I regularly copy large models, I want the whole network connection to be able to handle the transfer. Around 18% of consumers give transfer time top priority. |
Mirroring can help if one drive fails, but the National Cyber Security Centre says it isn’t a substitute for a backup.
Alongside your NAS, plan a copy in a separate location and test that you can restore the model.
A separate backup destination requires additional storage and management.
The NAS enclosures reviewed vary in depth, even when they’re relatively narrow.
Compare the height, width and depth with the space available, and allow for cables and ventilation.
With RAID 1, both drives contain the same data, so you don’t get twice as much separate storage.
First work out how much space you need for your projects and the version history you want to keep.
Keeping more project versions may mean you need larger drives.
The DS223j is a two-bay option for PC backups, provided its 100 mm-wide enclosure fits.
The TS-233 is a narrow two-bay option with Hybrid Backup Sync for local and remote backup destinations.
The Drivestor 2 AS1102T is a two-bay alternative with a 2.5GbE connection.
These Joybuy models are NAS enclosures for backups and growing project archives. Check the stated dimensions and whether drives are included; space requirements vary by model.
No image available
The stated backup features and eight drive bays may suit a growing project archive; check that the large enclosure will fit on your shelf.
8 drive bays and two 2.5GbE ports.
Stated dimensions: 45 × 36 × 30 cm. Allow extra space for ventilation.
No image available
This model may suit a growing archive if you choose the drives separately; also allow enough space for the enclosure and ventilation.
Four drive bays, expandable to nine, and two 2.5GbE ports.
Hard drives are not included. Stated dimensions: 29 × 26 × 24 cm.
No image available
The five drive bays may suit an archive with several projects; measure beforehand to make sure the enclosure fits on your shelf with room for ventilation.
Five drive bays, expandable to fifteen, and two 2.5GbE ports.
Hard drives are sold separately. Stated dimensions: 165.5 × 241 × 297.9 mm.
No. The National Cyber Security Centre distinguishes between keeping data available if a drive fails and having a separate backup. Keep a copy elsewhere too, and test that you can use it to restore your project files.
For a shared Revit project, don’t assume that a single model file is all you need. Autodesk describes an associated backup folder that must stay with the project model. Check which files are needed for your project type, and test the restore.
Measure the available height, width and depth, and allow for connections, cables and ventilation too. For example, the stated depth varies between the Synology DS223j, QNAP TS-233 and ASUSTOR AS1102T, so compare the dimensions of the exact model with your shelf.
Check whether the listing includes hard drives, and choose a separate backup destination in addition to the NAS. Calculate the usable capacity based on your project archive and the version history you want to keep, especially if you plan to mirror the drives.
If your organisation processes personal data in project files, you must protect it appropriately under the GDPR, according to the Dutch Data Protection Authority. The appropriate measures depend on the processing and the risks; this doesn’t mean you need to choose a particular NAS model or a fixed RAID configuration.