Who is this choice relevant to?

Team that needs to restore model versions

Wants to be able to restore an earlier project version after a mistake or unwanted change. Decide which project files and any Revit backup folder you need together; Autodesk explains where backup information for a shared model is stored.

Administrator of the shared workstation

Needs to decide whether to restore just project files or the workstation’s system and data as well. Check that your chosen backup method suits the operating system and the type of restore you need.

Growing project team

Weighs the space needed for projects and saved versions against the drive configuration and network connection. Compare the usable capacity of your planned configuration, not just its raw capacity.

What should you look for?

What to consider What should you check? Who is this important to?
Restoring model versions Check version history, which project files are included and whether you can carry out a restore test. If you need a usable earlier version of a model after a change, you’ll also want to know which related files need restoring. Around 36% of consumers give restoring versions top priority.
Workstation and shared access Decide whether you want to restore files or a complete system image. For an active shared Revit model, check SMB support and how it works on your local network separately. If you also need to restore the shared workstation, a copy of the model alone may not be enough. Around 29% of consumers prioritise workstation coverage and shared access.
Usable space and room to grow Assess your project files, expected growth and desired version history, then compare the usable capacity of your chosen drive configuration. If you want to keep projects and versions for longer, you’ll need room for planned growth. Around 21% of consumers give capacity and room to expand top priority.
Overall setup Check which drives are included with the enclosure, whether they are compatible and how to set up a second backup destination. If you want to understand the full setup in advance, factor in the enclosure, the drives you need and a separate backup destination. Around 14% of consumers prioritise the total cost of the setup.

Common pitfalls

  • Assuming a NAS or RAID is a complete backup strategy

    A NAS or mirrored drives are no substitute for separate backup copies. If the NAS or its location fails, you could still lose your only copy.

    Alongside your NAS, plan a separate backup destination and test that you can actually restore files from it.

    A separate destination takes time to set up and manage, even when it’s in another location.

  • Counting raw capacity as available project space

    Usable storage depends on the drives you use and the RAID configuration you choose. Synology makes the same distinction when describing the capacity of its models.

    Work out the space you need based on your planned drive configuration and how many project versions you want to keep.

    If the usable space won’t cover your version history, you may need a different drive configuration or an enclosure with more bays.

  • Assuming a fast network port means Revit collaboration will work

    A network port alone doesn’t confirm that a NAS is suitable for an active shared Revit model. Autodesk lists SMB and Windows network support, as well as local network latency, as separate considerations.

    Consider the NAS as a backup destination separately from the decision to store an active central model on it. Check that this workflow is suitable and test it on your intended network.

    Checking whether this workflow is suitable takes time; if it isn’t, you may need to consider a different collaboration solution.

Brands to consider

Synology

The DiskStation DS225+ and DS425+ are examples with two and four drive bays respectively. Synology describes uses including computer backups, restore points and backups to another location.

  • Synology says the models mentioned have 2.5GbE.
  • Check package support, the file system and drive policy for the exact model. Each feature has its own conditions of use.

QNAP

The TS-264 and TS-464 are examples with two and four drive bays respectively.

  • QNAP lists two 2.5GbE ports for both models.
  • The TS-264 and TS-464 are supplied without hard drives. Check drive compatibility and the software features you need; ports alone don’t guarantee transfer speeds or Revit compatibility.

ASUSTOR

According to the manufacturer, the AS5402T is an example with two drive bays, two 2.5GbE ports and space for M.2 drives.

  • The manufacturer lists various connection and storage options to consider for the specific model.
  • ASUSTOR says its published laboratory speeds were achieved under optimised conditions. Assess backup software and drive choice separately.

TerraMaster

The F2-424 is an example with two drive bays; TerraMaster lists several backup uses.

  • The manufacturer lists two 2.5GbE ports and snapshots.
  • Check that the backup applications and drives you need suit your setup; the ports alone tell you nothing about actual transfer speeds.

NAS enclosures on Joybuy

These NAS enclosures are worth considering as a backup destination for project files and a shared workstation.

Synology DiskStation DS1525+ NAS enclosure

Synology DiskStation DS1525+

Worth considering as a NAS destination for project file backups. Hard drives are not included, so check drive compatibility and the capacity you need.

Joybuy
Synology DiskStation DS1825+ NAS enclosure

Synology DiskStation DS1825+

Worth considering if you want to use a NAS as a backup destination for a shared workstation. Check that your chosen software supports the type of backup and restore you need.

Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

Consider this NAS enclosure as a backup destination for files, and check the capacity, drive compatibility and restore method you need in advance. Hard drives are not included.

Joybuy

Frequently asked questions

Is RAID 1 on a NAS enough for a backup?

No. The National Cyber Security Centre points out that RAID is not a substitute for a backup. Keep separate copies in more than one place too.

How can you check that an architectural model can really be restored?

Carry out a restore test and open the restored files. For file-based collaboration in Revit, you should also include the central model’s backup folder and follow the relevant Autodesk restore procedure.

Can team members work directly on a central Revit model on the NAS over the internet?

Don’t assume that they can. Autodesk describes file-based collaboration in Revit as designed for a local network and warns that higher latency can increase the risk of time-outs and central model corruption. For use over a WAN, the internet or a VPN, Autodesk recommends other collaboration solutions.

Are hard drives included with a NAS?

It depends on the model and the offer. QNAP says the TS-264 and TS-464 are supplied without hard drives. When buying, check what’s included and whether your chosen drives are compatible.

Which GDPR rules apply to backups of construction projects?

If your organisation processes personal data, it must determine appropriate security measures based on the risks, as the Dutch Data Protection Authority explains. If you engage a processor to handle that personal data, a written data processing agreement is required. The measures that are right for your team depend on the project data and the service you choose.