Who is a NAS suitable for?

Animators with irreplaceable projects

If you want to store project files centrally and be able to restore them, you need a separate backup as well as any drive redundancy. The National Cyber Security Centre and Synology Knowledge Center describe backup and RAID as separate parts of data protection.

Animators who transfer large files

If you regularly move large source files or exports, consider both the NAS port and the rest of your network when choosing. Adobe recommends using a fast drive for the After Effects disk cache; this is a separate consideration from the NAS.

Creators short on desk space

If you want to put a NAS on a small desk, allow for the enclosure, cables, ventilation space and the noise from the drives you choose. Manufacturer measurements are only useful when considered alongside the test conditions.

What should you look for when choosing?

First, decide what matters most for your work: recoverability, large file transfers, fitting the NAS into your space or the complete setup. Then check the relevant components and requirements, not just the NAS enclosure.

Consideration What should you check? Who is this important for?
Protection and recovery Check RAID support, backup options and how you can test recovery. If I want to be able to retrieve project files after data loss, I look beyond simply mirroring drives. Around 33% of consumers prioritise recoverability.
Transfers and workflow Check the ports on the NAS and computer, switch or router, the cabling and where the After Effects cache will be stored. If I regularly move large project files, I want to know whether my entire network can handle the connection I choose, and I keep the application cache separate in mind. Around 27% of consumers prioritise transfer speed.
Desk space and noise Measure the space needed, including cables and ventilation; consider noise measurements alongside the stated test conditions. On a small desk, I want to be able to position the NAS without blocking connections or ventilation. This matters to around 20% of consumers who prioritise fitting the NAS into their space.
Complete setup Check what is included, which drives are compatible and how much usable capacity you will get with your chosen configuration. If I want to assess the complete storage solution, I also factor in suitable drives and a separate backup destination. Around 20% of consumers prioritise the cost of the complete setup.

Common buying pitfalls

  • Assuming RAID 1 is a complete backup

    Mirroring can keep data available if one drive fails, but it does not give you a separate copy outside the NAS.

    Before you buy, decide where else you will store your project files and how you will check that you can restore them.

    A separate backup destination also needs to be managed and checked regularly.

  • Looking only at the enclosure

    A diskless NAS is not a usable project archive without suitable drives. With RAID 1, the usable capacity is also less than the combined capacity of two drives.

    Compare complete setups with the same target usable capacity, and check the compatibility list for the exact model.

    Suitable drives and any extra storage for backups are part of the total setup.

  • Treating a network port or noise rating as a guarantee

    Transfer speeds depend on the entire network connection. A measurement of a NAS at idle does not necessarily indicate how noisy it will be while the drives are active.

    Check every part of your network, and compare noise claims only when the stated operating state and test conditions match.

    You may need additional networking equipment for a faster network connection.

Brands to compare

Synology

The DiskStation DS225+ is a two-bay model with 1GbE and 2.5GbE. Synology lists its dimensions as 165 × 108 × 232,2 mm.

  • Synology lists backup software and a noise measurement of 19,6 dB(A) at idle under the stated test conditions.
  • Check that your chosen drives are on the compatibility list. The idle measurement does not predict noise during active use.

QNAP

The TS-233 is a two-bay model for central storage and sharing, with one gigabit port. QNAP lists its dimensions as 186 × 91,7 × 157,6 mm, excluding feet.

  • The stated enclosure is relatively narrow, which may be useful if space is limited.
  • The single gigabit port is a trade-off to consider if you regularly transfer large files.

ASUSTOR

The Drivestor 2 Gen2 AS1202T is a two-bay model with 2.5GbE and USB ports, including for external backups.

  • ASUSTOR lists support for snapshots and external backup options.
  • Transfer results published by ASUSTOR are laboratory measurements taken under optimised conditions, not an independent test of an animation workstation.

UGREEN

According to UGREEN, the NASync DXP2800 is a diskless two-bay model with Intel N100 and 2.5GbE, for anyone who wants to choose their own drives.

  • UGREEN lists support for third-party drives.
  • Check the compatibility list, the exact version and which items are included with purchases in the Netherlands.

Joybuy products to consider

These Joybuy models are NAS systems for central project storage. In particular, compare the number of drive bays, stated dimensions and network connections with your workspace and network.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

An option to consider for central storage and backup features, provided you have enough room for the enclosure.

Five drive bays; two 2.5GbE ports. The stated dimensions are 165,5 × 241 × 297,9 mm. Hard drives are not included.

View at Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+, without hard drives

This version is designed for anyone who wants to choose their own compatible drives; allow for the stated floor-standing placement and dimensions.

Four drive bays and two 2.5GbE ports. The stated dimensions are 29 × 26 × 24 cm. Hard drives are not included.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

A model with plenty of drive bays to compare if your workspace has room for a larger enclosure.

Eight drive bays and two 2.5GbE ports. The stated dimensions are 45 × 36 × 30 cm.

View at Joybuy

Frequently asked questions

Can I use RAID 1 as the only backup for my animation projects?

No. RAID 1 writes the same data to two drives and can protect against the failure of one drive, but it does not replace a separate backup. The National Cyber Security Centre recommends keeping important data in another location as well.

Does the After Effects cache need to be on the NAS?

No, not if you want to use the NAS as a project archive. Adobe recommends using a fast drive for the After Effects disk cache, so choose where to store it separately from your central project storage.

What space and network connections should I check before installation?

Compare the enclosure dimensions with the available space, allowing for cables and ventilation, and check that the network connections will work with your computer, router or switch and cabling. The QNAP TS-233 has one gigabit port; the Synology DS225+ has both a gigabit and a 2.5GbE port.

How do I choose drives for a diskless NAS?

Check the compatibility list for the exact NAS model and decide in advance how much usable storage you need. With RAID 1 and two drives, the usable capacity is less than the combined capacity of both drives.

Are there privacy rules for client files stored on my NAS?

If your organisation processes personal data, the Dutch Data Protection Authority says you must determine appropriate security measures based on the risks. How long you keep the data depends on its purpose and any other legal obligations; this is not a general requirement for every home NAS user.