Choose a NAS based on simultaneous file transfers, the archive you need and how shared project folders will be managed. For smooth transfers, the NAS, switch and workstations must all support the network connection you want; manufacturer specifications don’t automatically predict speeds in your studio. Plan a separate, restorable backup too: drive redundancy alone doesn’t give you an extra recovery copy.
Who needs a shared studio NAS?
Animators working with large files at the same time
You want to open or transfer project files from several workstations. So, look at the entire network connection, not just the NAS port. Relevant model information is available from Synology, QNAP and ASUSTOR.
Studio managers overseeing shared projects
You want central project folders and access that suits each team member’s role. Synology Knowledge Centre describes shared folders as places to store files and folders on a storage system.
Teams with work that’s difficult to replace
You want to be able to recover project versions if they’re lost or damaged. Veeam and Lenovo Netherlands treat backup as a separate choice for protecting and restoring project files.
What should you look for?
Start by considering the network, access management, recovery and archive growth together. Then choose a NAS that suits the way your team works.
2.5GbE with expansion option
Choose this if: your studio needs central storage and may add a faster network connection later.
Bear in mind: the models mentioned don’t have built-in 10GbE as standard; check your switch and workstations too.
Built-in 10GbE
Choose this if: you already have, or plan to install, a compatible high-speed network connection and don’t want to add a NAS expansion card.
Bear in mind: the NAS port alone doesn’t determine transfer speeds; compare the model’s bays, software features and drive compatibility too.
Room for archive growth
Choose this if: your project library is growing and extra storage space matters more than a faster network connection right away.
Bear in mind: the number of bays and raw capacity aren’t the same as the usable space after choosing your drives and RAID configuration.
| Consideration |
What to look for when buying |
Who is this important for? |
| Throughput with simultaneous use |
Establish how many people will use the system at once, and check the NAS, switch and workstation connections as one complete chain. Don’t treat stated performance figures as a measurement of your studio. |
If I want to open or transfer large files from several workstations, the entire network route needs to support this. Around 31% of consumers choosing a NAS for a shared animation studio put throughput first. |
| Access to project folders |
Check that the software supports shared folders and the user and permissions management you need. |
I want to give team members access that suits their work, without sharing project folders more widely than necessary. Consumers who make access management their top priority account for around 25% of those choosing a NAS for a shared animation studio. |
| Recovering project files |
Check the backup options, keep a separate copy and test that you can restore a project file. |
If work is difficult to replace, I want to be able to recover files from another copy after an incident. Around 25% of consumers in this studio scenario put recoverability first. |
| Usable space for a growing archive |
Measure your current project library and its growth, then calculate usable space based on your chosen drives and RAID configuration. |
I want to store new projects without confusing raw capacity with the storage space available. Consumers who prioritise archive growth account for around 19% of those choosing a NAS for a shared animation studio. |
Common pitfalls
-
Assuming a 10GbE port guarantees project speeds
A port specification or manufacturer test doesn’t describe the entire network chain or the demands of simultaneous use in your studio.
Map the connection from each relevant workstation to the NAS before choosing between built-in 10GbE and an expansion module.
You may also need a compatible switch, workstation connections or a separate NAS module.
-
Confusing raw capacity with usable project space
Available space depends in part on your drives and chosen RAID configuration.
Calculate usable capacity with the drives and RAID configuration you plan to use, not just a stated maximum.
You may also need compatible drives or a separate expansion unit.
-
Treating drive redundancy as complete protection
A redundant storage pool isn’t the same as a separate copy that lets you recover lost project files.
Plan a separate backup and test that you can restore files before making the NAS your only project storage location.
A separate backup destination also takes time to manage and test for recovery.
Brands to consider
Synology
According to Synology, the DS1525+ is a five-bay model with two built-in 2.5GbE ports and support for a separately available 10GbE module.
- Synology lists file sharing and backup features; expansion units can increase the number of bays.
- Check drive compatibility. Manufacturer throughput figures don’t guarantee performance under the demands of your studio.
QNAP
The TS-673A is a six-bay model with two built-in 2.5GbE ports and PCIe expansion, including support for 10GbE.
- QNAP specifies two M.2 slots and a choice between QTS and QuTS hero.
- The 10GbE expansion mentioned isn’t the same as a built-in 10GbE port; manufacturer claims aren’t an independent measurement of your studio setup.
ASUSTOR
The Lockerstor 4 Gen3 AS6804T is a four-bay model. ASUSTOR lists built-in high-speed network ports.
- The specifications list two 10GbE ports, two 5GbE ports and four M.2 slots.
- Published speeds are based on manufacturer testing; results may differ in another network environment.
UGREEN
According to UGREEN, the NASync DXP4800 Plus has four bays, one 10GbE port and one 2.5GbE port.
- The manufacturer lists permissions management and support for drives from other brands.
- For a listing in the Netherlands, check the warranty and sales terms that apply to that offer.
Joybuy products for shared project storage
This Joybuy selection focuses on Synology NAS systems for central project storage and archive growth in a shared studio.
No image available
Synology DiskStation DS1525+
An option for central storage of shared project files and an archive that can grow with your needs.
Five bays and two built-in 2.5GbE ports. A 10GbE module is available separately; hard drives aren’t included.
Plan a separate backup too, and test that you can restore files.
View at Joybuy
No image available
Synology DiskStation DS1825+
A model to consider comparing for central project files and a growing archive.
Check the number of bays, network ports and any expansion options against your planned drive configuration and studio connections.
A separate, tested backup is still needed to recover files beyond your day-to-day storage.
View at Joybuy
No image available
Synology DiskStation DS925+ without hard drives
An option to compare for central project files and data management.
The product name states that hard drives aren’t included. Check the bays and network ports against your preferred drive and studio setup.
Set up a separate backup too, and test that you can restore files.
View at Joybuy
No image available
Synology DiskStation Intel Celeron J4125 Q
Worth comparing for central project files and shared folders.
Check that the connections and storage configuration suit the number of simultaneous users and the expected growth of your archive.
Plan a separate backup alongside the NAS, and check recovery with a test.
View at Joybuy
Frequently asked questions
Is RAID enough to back up animation projects?
No. RAID isn’t the same as a separate backup outside your primary project storage. Veeam describes the 3-2-1 approach as keeping three copies of your data. Set up a separate copy and test that you can actually restore a project file.
How do you set up a NAS for a shared project?
Start with the storage configuration, then create shared project folders and give team members the appropriate access. Synology Knowledge Centre describes shared folders as storage locations for files and folders. Also check that your chosen software supports the studio’s permissions management and backup processes.
Is there one standard NAS specification for storing personal data in the Netherlands?
No. The Dutch Data Protection Authority describes security measures as depending on the processing involved and the associated risks, rather than prescribing one NAS model or port speed. If your studio processes personal data, identify the appropriate measures you need. Access management, updates and restorable backups are examples, not a universal product specification.