Who is this choice relevant to?

Uploading from beyond the hallway

Your wired connection works, but Wi-Fi is weak where you want to upload the photo album. Both coverage in that spot and the speed of your internet connection matter. Consumentenbond and ACM ConsuWijzer offer practical advice on what to consider.

Uploading with a slow connection

Uploading takes a long time even over an Ethernet cable. First, check the upload speed provided by your connection; a different Wi-Fi router won’t increase it. ACM ConsuWijzer explains what speed information providers must give for a fixed-line connection.

Living with limited hallway space

You want better coverage without putting a device somewhere that gets in the way. Available space and the option to mount it on a wall or ceiling may be deciding factors; TP-Link lists these mounting options for the Deco X50-PoE V2.

What should you consider before buying?

First, compare wired and wireless upload speeds where you use the album. If the wired connection works well but Wi-Fi falls short in that spot, an extra access point or mesh system is a sensible option to explore.

What to consider What should you check? Who should pay particular attention?
Coverage where you upload Compare Wi-Fi coverage before and beyond the hallway; check whether there’s space for an access point in between. If Wi-Fi drops out where you want to upload, you’ll want to know whether an extra access point can provide usable coverage there. Around 36% of consumers prioritise coverage in that spot.
Upload speed Measure the speed over a wired connection at the router, then compare it with Wi-Fi where you use the device. If your photo album is slow to upload, you’ll first want to find out whether the connection or Wi-Fi is the limiting factor. Around 29% of consumers prioritise upload speed.
Positioning in the hallway Check the available space, mounting options and cable route for the exact model. If an extra access point would obstruct the hallway, you’ll want to find somewhere to put it that’s out of the way. Around 21% of consumers prioritise keeping the walkway clear.
Compatibility and maintenance Check router or access point mode, the power supply and cables required, firmware updates and the CE marking. If you want to keep using your existing provider equipment, you’ll want to know how the new equipment connects to it and what installation involves. Around 14% of consumers place the greatest importance on compatibility and additional requirements.

An access point also needs a usable connection to the previous point. Consumentenbond therefore recommends considering distance and obstacles. If possible, an Ethernet cable between the points can be an alternative to a wireless connection.

Common buying mistakes

  • Assuming a high Wi-Fi speed means fast uploads

    Your internet connection speed and your wireless connection are separate links in the chain. A new router won’t automatically fix a slow upload over a wired connection.

    First, measure the speed using an Ethernet cable and compare it with the Wi-Fi upload speed where you use the album.

  • Putting a wireless mesh point right at the far end of the hallway

    An extra point still needs to receive a usable connection from the previous one. If the signal is weak where you put it, it may not be able to pass on the connection you need.

    Try a position in between and check whether you can use an Ethernet cable for backhaul.

    Allow for possible extra cabling or a different position.

  • Buying a PoE model or set without checking the exact version

    Mounting, power and connections vary by model and hardware version. A set with more Wi-Fi points isn’t automatically necessary for a narrow hallway.

    Before buying, check the exact version, what’s included in the set, the power supply method and where each point will go.

    Installation may require a compatible PoE power supply, cables or mounting hardware.

Brands to consider

TP-Link

The range includes standalone Wi-Fi routers and mesh systems, including models with wall or ceiling mounting options.

  • TP-Link lists three gigabit ports per point for the Deco X50 and two 2.5 Gbps ports per point for the Deco X50-PoE V2.
  • For a PoE model, check the exact hardware version and the power supply required. These connections alone don’t tell you what upload speed you’ll get at home.

FRITZ!

The FRITZ!Mesh Set 1600 is designed to extend an existing home network with extra Wi-Fi points, including behind a router from another manufacturer.

  • FRITZ! says the set can be connected via LAN and includes a five-year warranty.
  • When used behind a router from another brand, a repeater in the set becomes the Mesh Master for a separate FRITZ! network. Don’t assume it will automatically integrate with all the features of your existing router.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router with several operating modes, including access point and AiMesh node modes.

  • ASUS specifies one gigabit WAN port and four gigabit LAN ports for this model.
  • The manufacturer lists different processors for V1 and V2. Check the version before choosing a model based on features that vary by version.

NETGEAR

According to NETGEAR, the Orbi RBK763S is a tri-band Wi-Fi 6 mesh set comprising a router and two satellites.

  • NETGEAR lists a dedicated connection between the router and satellites, and seven gigabit ports across the set.
  • These product specifications don’t show that three points are necessary in a smaller home, or what upload speed you’ll get there.

Products at Joybuy

These product options cover the main choices: a standalone router, a mesh system or a separate access point for extra Wi-Fi coverage.

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white, 2-pack

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7 (2-pack)

A mesh option to consider if measurements point to a coverage problem and you want to use multiple points.

The product description lists Wi-Fi 7, MLO and support for wired backhaul.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band Wi-Fi router, black

ASUS RT-AX52 AX1800

A standalone router to consider if one well-positioned transmitter can reach the spot where you upload.

The product information lists Wi-Fi 6, AiMesh and three gigabit Ethernet ports.

View at Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system, 2-pack

TP-Link Deco X50-PoE (2-pack)

A mesh set to consider if measurements show a coverage problem and a wired installation is possible.

The product information lists Wi-Fi 6, PoE support and two Ethernet ports per point. Check the exact version and the power supply required.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 2-pack

TP-Link Deco X50 (2-pack)

A mesh set to consider if measurements show a Wi-Fi coverage problem.

The product information lists Wi-Fi 6, optional Ethernet backhaul and three gigabit Ethernet ports per point.

View at Joybuy
TP-Link Omada EAP613 wireless access point

TP-Link Omada EAP613

An access point to consider if you need an extra point and have space to mount it on a wall or ceiling.

The product information lists Wi-Fi 6, wall or ceiling mounting and power via PoE or DC. When installing it, bear in mind which power option you choose.

View at Joybuy

Frequently asked questions

How can you tell whether a new router will speed up uploads?

First, measure the upload speed using an Ethernet cable close to the router and compare it with the speed included in your broadband package. Then measure it over Wi-Fi where you use the device. If the wired upload speed is already low, investigate your connection first or contact your provider. Consumentenbond recommends using a wired connection for a speed test, and ACM ConsuWijzer explains the speed information for fixed-line connections.

Where should you put an extra Wi-Fi point in a narrow hallway?

Don’t put it somewhere the existing signal is already weak: the extra point needs a usable connection to the previous one. Try a position in between or, if possible, use an Ethernet cable. A model that can be mounted on a wall or ceiling may help keep the walkway clear.

Can you use your own router in the Netherlands?

Yes. ACM ConsuWijzer confirms that you can choose your own router. A provider may refuse to allow your own device, for example, if it’s unsafe. If needed, ask for the settings required to connect the device to your network.

What safety checks matter when choosing a Wi-Fi router?

Check the CE marking on the device and keep it up to date. The Dutch Authority for Digital Infrastructure explains the requirements for radio equipment and the stricter cybersecurity requirements that have applied to certain wireless equipment since 1 August 2025. Check the information for the specific item; a product page alone doesn’t prove that it meets the applicable requirements.

What can you do if your router develops a fault after you buy it?

Report the fault to the seller if you want to claim under your statutory warranty. According to ACM ConsuWijzer, this warranty in the Netherlands depends on how long you can reasonably expect the product to last; it isn’t simply a fixed two-year period. Any manufacturer’s warranty is separate.