Who is this choice relevant to?

Studio manager with floors that can be cabled

Wants to plan coverage for each work area and manage multiple access points together, taking the gateway, switch and power supply into account.

Studio manager without new cable routes

Needs Wi-Fi on additional floors without running cables straight away, and wants to test the wireless connection between mesh nodes in their intended locations.

Manager of shared workspaces

Wants to give staff and visitors appropriate access and check that the chosen system’s settings support this.

What should you look out for?

Start by checking the available cable routes and work areas. Then decide whether wired access points, wired mesh or wireless mesh is right for your setup.

Wired business access points

Suitable when: cables can be run to suitable locations on each floor and centralised management is important.

Bear in mind: an access point is not automatically an internet router; check the gateway, switch, power supply and management requirements.

Mesh with Ethernet backhaul

Suitable when: you want mesh management and have usable Ethernet connections between floors.

Bear in mind: ports, power supply and guest network features vary between models and should be checked separately.

Wireless mesh

Suitable when: installing cables isn’t currently possible and measurements show a usable connection between the mesh nodes.

Bear in mind: the wireless connection between nodes shares the same environment; coverage and speed on other floors can’t be guaranteed in advance.

Use the table to assess the main considerations for each work area and use case.

Consideration What to look for Who is this important for?
Coverage between floors Map out workstations, building materials and cable routes; measure coverage and roaming in the intended locations. If workstations are spread across several floors, I want to know whether the connection will remain usable everywhere and what happens when switching between nodes. Around 36% of consumers rank coverage between floors as their top priority.
Working at the same time Check the number of devices in use at once, the internet connection, and the speed of the switch and uplinks; test the load on site. When several people are working at the same time, I want to check whether the connection can handle the demands of shared workspaces. Around 29% of consumers prioritise capacity for simultaneous work.
Guest access Check the guest network and access rules, and test which internal services a guest device can reach. If visitors use Wi-Fi, I want to be able to manage their access in relation to staff access and studio files. Around 21% of consumers put separation between guest and work access first.
Installation and management Check existing cables, PoE support, adapters, the gateway and the management features you need. If I want to minimise cabling and installation, I want to know in advance what power supply and network equipment I’ll need. For around 14% of consumers, ease of installation and management matters most.

Common pitfalls

  • Assuming the stated range means coverage on every floor

    A manufacturer’s coverage figure in square metres doesn’t show how Wi-Fi will travel through the floors and work areas of your studio.

    Measure coverage at workstations and potential installation points before deciding how many units to buy.

    A poor estimate could mean extra nodes, repositioning or cabling later on.

  • Buying an access point without planning the rest of the network

    Power and network connections vary by model; an access point doesn’t automatically replace the gateway or switch.

    Map out the connection from the modem to each Wi-Fi point and check the requirements of your chosen model.

    The installation may also require a suitable switch, power supply or additional network equipment.

  • Assuming a guest network provides complete isolation

    A guest network is a feature that needs to be configured; its name doesn’t prove that the internal resources you want to protect are inaccessible.

    Before giving visitors access, use a guest device to test which internal services they can reach.

    Access rules may require additional setup and ongoing management.

Brands to consider

TP-Link Omada

Business access points for environments where multiple nodes are managed together; the EAP650 V1.20 is one example for office spaces.

  • According to TP-Link, the EAP650 V1.20 supports centralised management, 802.3at PoE and wireless links between access points.
  • Check the hardware version and the gateway, switch and management setup required; product specifications don’t determine coverage in your studio.

Ubiquiti UniFi

Access points and management for multiple work areas; the U6+ is one example for smaller business environments.

  • The official U6+ specifications list a gigabit Ethernet connection, guest network isolation and roaming features.
  • Check the power supply and any other network components required for your chosen model.

HPE Networking Instant On

Access points for smaller business environments; HPE positions the AP22 for settings including offices.

  • HPE lists Wi-Fi 6 for the AP22; Instant On also documents a separate guest network.
  • Product information about the AP22 doesn’t show how well the access point will perform through your studio’s floors.

TP-Link Deco

A mesh range aimed more at home use; the X50-PoE, listed in the Netherlands, can also be mounted on a ceiling or wall.

  • TP-Link lists PoE and Ethernet ports for the X50-PoE.
  • A stated coverage area isn’t a measurement in your studio; check that the management and access features suit shared business use.

ASUS ZenWiFi

Mesh products that, depending on the model, let you choose between a wireless or wired connection between nodes.

  • ASUS lists both connection options between mesh nodes for the XT9.
  • ASUS warns that certain channel options may vary by country; check the model and installation requirements for the Netherlands separately.

Products for this studio setup

These product choices focus mainly on wired access points for shared workspaces, with a mesh kit also included for a multi-node setup. Before using them in the Netherlands, check the exact model, CE marking, and applicable frequency and usage requirements.

TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653 Wi-Fi 6 access point

An option for wired work areas where wall or ceiling mounting is preferred. The product description lists PoE, VLAN mapping and web management; you’ll also need to plan for a gateway and a suitable power supply.

View at Joybuy
Ubiquiti U7 Pro Wi-Fi 7 access point

Ubiquiti U7 Pro Wi-Fi 7 access point

This access point may suit a wired installation on a wall or ceiling. The product description lists Wi-Fi 7, PoE, a 2.5-Gbit/s Ethernet port and VLAN support; check the PoE infrastructure you’ll need.

View at Joybuy
TP-Link EAP725-Wall Wi-Fi 7 access point

TP-Link EAP725-Wall Wi-Fi 7 access point

A possible choice for a wired network point on the wall. The product description lists PoE, three Ethernet ports and 2.5G support; check that the connection and switch are suitable for your installation.

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh kit with three units

TP-Link Deco X50-PoE (3-pack) Wi-Fi 6 mesh

This three-unit kit is designed for a mesh setup across multiple work areas. The product description lists dual-band Wi-Fi, PoE, two Ethernet ports per unit and guest access; test the connection between nodes and check the access rules.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi 6 access point

TP-Link Omada EAP613 Wi-Fi 6 access point

An option for wired installation where Omada management is relevant. The product description lists PoE, gigabit Ethernet, mesh support and roaming features; check the power supply and gateway you’ll need.

View at Joybuy

Frequently asked questions

Is one powerful router enough for several floors?

You can’t tell from the radio speed or a stated coverage area. Map out your work areas, measure coverage and demand, and then decide whether you need additional Wi-Fi points, and where to place them.

Does an access point have to connect directly to the internet modem?

Not necessarily. A business setup can use an existing gateway or router, a switch and wired access points. Check that the access point can be powered by a suitable PoE switch or another compatible power option.

What additional installation equipment should the studio allow for?

As well as the Wi-Fi points, consider cabling, a switch, power supply, gateway and any setup or surveying required. The components you need will depend on your existing infrastructure and the model you choose.

Do you need a licence for Wi-Fi in a business building in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is licence-exempt if you use the frequencies allocated for it and comply with the relevant conditions of use. Licence-exempt doesn’t mean that every radio setting or model is suitable.

What should I look out for when choosing Wi-Fi equipment in the Netherlands?

Check that your chosen model has the required CE marking and is intended for use in the EU. The Dutch Authority for Digital Infrastructure also states that Wi-Fi is licence-exempt only when you use the frequencies allocated for it and comply with the conditions of use.