Who is this monitoring setup for?

Speech mixer preparing for a presentation

You want to assess voices, music and transitions from one fixed listening position. Genelec offers advice on positioning monitors around a listening position.

Creator with a small desk

You need to make room for a stereo setup and decide whether a compact set or two separate speakers will fit your workspace better. The dimensions and connections of each model can help you narrow down your options.

Mixer in a shared space

You can’t always listen through speakers and want to know when headphones are a useful alternative or an additional way to check your mix. Audient discusses the trade-offs between monitors and headphones when mixing.

What should you consider when choosing?

Compact USB-C desktop set

Choose this option: if you’re playing audio from a compatible computer and have space to position both speakers symmetrically.

Things to consider: ADAM Audio says the D3V can play audio from a computer via USB-C without a separate audio interface. Check that the set and connection are compatible with your equipment.

Two separate nearfield monitors

Choose this option: if you have suitable analogue outputs and can position both speakers well.

Things to consider: The Yamaha HS5 and PreSonus Eris Studio 5 (Single) are sold individually. For stereo, you’ll need two monitors and suitable cables.

Headphones as an alternative or for an extra check

Choose this option: if neighbours, a shared space or limited room make speakers difficult to use, or if you want to check your mix in another way.

Things to consider: Stereo positioning sounds different through headphones than it does through speakers. If possible, check the finished mix on another playback system too.

Consideration What to check before buying Who prioritises this?
Assessing voices and music Compare frequency limits only when they use the same dB reference. Listen from a fixed position and check on a second playback system too. I want to assess whether voices, music and transitions are balanced before the presentation, rather than just look at a frequency figure. Around 25% of consumers put this balance first.
Positioning and the room Measure the space for both speakers and check that you can position them as symmetrically as possible around your listening position. If my desk has limited space, I want to know whether the left and right speakers will both fit properly and how the room will affect the sound. Around 25% of consumers prioritise their listening position.
Connecting to your equipment Make a note of the outputs on your computer, mixer or interface and compare them with the monitor inputs, such as USB-C, XLR, TRS or RCA. I want to connect my existing equipment without having to guess which output or cable I need. These connections are the top priority for around 19% of consumers.
Listening quietly Work out when speakers are practical to use and, if needed, plan to check your mix on another playback system. In a shared space, I want to assess my mix without disturbing housemates or neighbours. Around 19% of consumers prioritise quiet monitoring.
Complete stereo setup Check whether the version includes one speaker or a pair, and which cables you’ll need for the complete setup. I want to know in advance what’s in the box and what else I need to listen in stereo. A complete setup is the top priority for around 12% of consumers.

Common pitfalls

  • Confusing one monitor with a stereo pair

    Yamaha lists the HS5 as individually packaged, while PreSonus describes the Eris Studio 5 version as “Single”. ADAM Audio describes the D3V as a pair. The number of speakers therefore varies by version.

    Check exactly what’s in the box and whether you’ll have a complete stereo setup that you can connect.

    If you choose a version with one monitor, you may need a second speaker and suitable cables for stereo.

  • Using the lowest frequency as a quality ranking

    Manufacturers state frequency limits using different dB references, and the room affects what you hear from your listening position. So a lower figure on its own doesn’t tell you how a monitor will sound in your space.

    Compare only figures that use the same measurement reference, and check music with plenty of bass from your listening position and elsewhere.

  • Assuming a balanced cable will solve hum on its own

    According to Focusrite, a connection is only balanced if the monitor input supports it too. Hum can also have several causes.

    Check both connections and investigate any hum systematically.

    You may need to replace the cables or investigate your existing signal chain step by step.

Relevant brands to consider

Yamaha

The HS series includes individual active nearfield monitors. The HS5 is an analogue option for equipment with compatible outputs.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL and HIGH TRIM controls, for the HS5.
  • The stated lower limit of 54 Hz at −10 dB isn’t directly comparable with a limit measured at −6 dB.

ADAM Audio

The D3V is a compact desktop set, while the separate T5V is a nearfield monitor that ADAM Audio also positions for broadcast production.

  • ADAM Audio says the D3V has USB-C and TRS connections. USB-C playback from a computer can remove the need for a separate interface.
  • Product specifications can’t predict how the monitors will sound or fit in your room.

PreSonus

PreSonus describes the Eris Studio 5 as designed for home studios and small mixing spaces, with several types of analogue input.

  • PreSonus lists Acoustic Space, mid and high controls.
  • The Eris Studio 5 version is described as an individual monitor. Check the number of speakers included in the version you choose.

Genelec

The 8010A is an individual, compact monitor with an analogue XLR input.

  • Genelec lists dimensions of 195 × 121 × 115 mm per speaker and room compensation switches.
  • The stated lower limit of 67 Hz at −6 dB doesn’t, on its own, tell you how much bass you’ll hear from your listening position.

KRK

The ROKIT 5 Generation Five is an individual active monitor with monitoring modes described by KRK.

  • KRK lists Mix, Focus and Create settings.
  • KRK’s description of these modes doesn’t prove that one setting makes speech easier for every listener to assess.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I monitor directly from my computer?

That depends on the monitor and your computer’s outputs. ADAM Audio says the D3V can play audio directly from a computer via USB-C; an analogue model such as the Yamaha HS5 needs a compatible analogue output and cable. Check which connections you actually have.

How should I position two monitors?

Genelec recommends starting with a symmetrical setup, with a 60° angle between the monitors and the listener at the tip of an equilateral triangle. Then assess how reflections and the room affect the sound from your listening position.

Does a radio mix always have to be delivered at −23 LUFS?

No. Don’t infer the delivery standard from your choice of monitors alone. The European Broadcasting Union recommends −23 LUFS in EBU R 128, but describes different distribution formats and level controls for radio. Before delivery, ask which specification the client or distribution channel requires.

What cooling-off period and guarantee apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, online consumer purchases usually come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. If a product is faulty, consumers can invoke their statutory guarantee rights with the seller; a manufacturer’s guarantee doesn’t determine those statutory rights. Check separately which terms apply if you’re buying for business use.

Does a CE logo prove that an active monitor is suitable for my mix?

No. For product groups that require CE marking, the manufacturer declares that the product meets the applicable EU requirements. The Netherlands Enterprise Agency explains that CE marking isn’t an independent safety certification; it also says nothing about how a monitor will make your mix sound in your room.