If you’re editing on your own with an audio interface already in place, easy-to-reach volume, mute and mono controls are often more useful than extra recording features. Only choose a more advanced model if you genuinely switch between pairs of speakers or need separate headphone mixes and talkback. Check that the connections work with your existing equipment. Listening in mono can reveal differences between drum tracks, but it won’t fix phase or timing problems.
Who is a monitor controller for?
Multitrack drum editor
You want to check overheads and other drum tracks in mono quickly while editing. Sound On Sound explains how differences in polarity and timing between drum tracks can affect the stereo image and the sound in mono. For this reason, check any discrepancies on individual tracks too.
Solo editor at a single desk
Your audio interface already handles recording, and you mainly want an accessible volume knob with mute and dim controls for monitoring. Compare these features with what your interface already offers.
Editor working with musicians
Separate headphone levels, a cue source or talkback can be useful during recording or editing sessions with others. Check whether your interface can provide the signals needed for your preferred cue mix.
Which features matter?
Start with the controls you use while editing. Then count the sources, pairs of speakers and headphone routes you actually need.
| What to consider |
What to look for |
Who is this important for? |
| Checking drum tracks in mono |
Check whether the exact model offers mono. Then listen to the overheads and other drum tracks individually in your editing software too. |
If you want to check drum tracks in mono quickly, you need to be able to hear differences without expecting the controller to fix them. Around 36% of consumers put a mono control at the top of their list. |
| Volume, mute and dim |
Compare the controls with those on your interface, and consider where the controller will sit on your desk. Check which features are available on each model. |
If you want to adjust your monitoring volume directly and mute it quickly without opening software, physical controls matter. Around 29% of consumers prioritise these controls. |
| Headphones and cue |
Count how many people need to listen at once, and check source selection and level control for each output. Make sure your interface can provide the cue mix you need. |
If you work with others, you may need a separate monitoring route or headphone mix. Around 21% of consumers put headphone and cue routing first. |
| Switching between sources and speaker pairs |
Count the stereo sources and pairs of speakers you’ll connect. Also check that the connectors and separate level controls are compatible with your equipment. |
If you genuinely want to switch between connected sources or speaker pairs, make sure the controller supports those routes. Around 14% of consumers choose this as their main buying priority. |
What to watch out for when buying
-
Assuming every passive controller can drive headphones
According to Mackie’s model comparison, the Mackie Big Knob Passive has no headphone output; the Big Knob Studio is a different model.
Check the full model name and decide whether your existing interface already handles the headphone route.
If you need a separate headphone route, you may need a different solution or another controller model.
-
Thinking mono monitoring will fix the recording
Mono can make differences between drum tracks easier to hear, but it won’t change the polarity or timing of the source tracks. Sound On Sound explains how these differences can affect the sound in mono.
Use mono as a check, then investigate any noticeable differences on individual tracks in your editing software.
-
Choosing more outputs without counting your signal routes
The models reviewed vary in the number of sources, speaker pairs and headphone routes they support. Extra connections may go unused if you only use one source and one pair of speakers.
Map out your current and desired signal path, then compare it with the connections on the exact model.
Extra routes may require additional cables, while unused features won’t give your setup any controls it needs.
Brands to consider
Mackie
The Big Knob Passive is designed for simple stereo control. The Big Knob Studio is a separate model, with features including a USB interface and headphone outputs.
- Mackie specifies two sources, two monitor pairs, and mono, mute and dim controls for the Big Knob Passive.
- According to Mackie’s model comparison, the Big Knob Passive has no headphone output. The 2×2 USB recording feature is on the Big Knob Studio, not the Passive; this alone says nothing about independently measured sound quality.
PreSonus
The Monitor Station V2 is worth considering if you need multiple pairs of speakers and separately adjustable headphones.
- PreSonus specifies three stereo pairs of speaker outputs, four headphone outputs, Main/Cue selection and talkback.
- Check whether your existing interface can provide the cue feed you need. These features are product specifications, not the results of an independent practical test.
Audient
The Nero could suit a home studio where you want to combine different stereo sources and speaker pairs with cue and polarity controls.
- Audient lists three stereo speaker outputs, four headphone outputs, and mono and polarity controls.
- This extra routing isn’t necessarily needed by one editor using one pair of speakers; the features mentioned are Audient specifications.
Palmer
The MONICON XL is worth considering if you want to use several pairs of monitors and check stereo coherence separately.
- Palmer specifies three speaker outputs, a mono sum output and a correlation meter for the MONICON XL.
- Palmer describes the MONICON XL as an active controller. The meter won’t automatically correct drum tracks; don’t confuse this model with other MONICON models.
Joybuy products
Related products coming soon.
Frequently asked questions
Can a mono button fix phase problems in my drum recording?
No. Listening in mono can make differences easier to hear, but it won’t change the source tracks. Sound On Sound describes a drum recording where the polarity and timing of the overhead tracks played a part. Check and correct the relevant tracks in your editing software where necessary.
Do I always need a monitor controller as well as my audio interface?
No, not if your interface already gives you easy access to the volume and headphone controls you need, and you don’t need extra switching options. First compare the controls you already have with the features you’re actually missing.
How do I connect a controller without buying one with the wrong features?
Map out the signal path: from your audio interface or another stereo source to a suitable controller input, then on to the speakers. Check the connectors and the number of routes needed on both devices. To create a separate cue mix, your source must be able to provide that mix too. Start with the monitoring volume turned down low.
How can I monitor responsibly for long periods?
Keep the volume low and take breaks. The World Health Organization points out that sound level, exposure time and how often you’re exposed to loud sounds all contribute to the risk of hearing loss. A dim button alone doesn’t guarantee a safe listening level.
What cooling-off period and guarantee apply when buying online in the Netherlands?
When you buy remotely from a business, you’re generally entitled to a 14-day cooling-off period; the Dutch government advises checking the applicable terms and exceptions. Dutch law also provides a statutory guarantee with no fixed legal time limit. If a product is faulty, contact the seller, not just the manufacturer.