Mixer with one pair of monitors
You usually mix backing vocals on your own and want to control the volume, mono, dim or mute directly, alongside your existing audio interface.
If you only mix backing vocals at a desk, using an existing audio interface and one pair of speakers, start with the control you’re missing – perhaps an easy-to-reach volume knob, mono, dim or mute. Extra speaker outputs, headphone routes or talkback are mainly useful if you actually switch between listening references or record singers. Check that the connections and signal path are compatible with your current equipment.
You usually mix backing vocals on your own and want to control the volume, mono, dim or mute directly, alongside your existing audio interface.
You compare the vocal balance through different pairs of speakers or sources, so you need switchable outputs.
As well as speaker controls, you may need a headphone route for the singer, and sometimes talkback too.
First, check which controls your current interface already offers. Then choose the number of source, speaker and headphone routes you’ll actually use.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Direct control | Check that the volume control is easy to reach and that mono, dim and mute are available. | If I want to switch quickly between listening modes while mixing, without using software controls, direct access is my priority. Around 36% of consumers are expected to prioritise direct control. |
| Multiple pairs of speakers | Count the sources and pairs of speakers you need separately, and check which outputs are genuinely switchable. | If I want to check backing vocals on more than one pair of speakers, I need suitable switchable outputs. Around 29% of consumers are expected to prioritise switching between speakers. |
| Headphones and talkback | Check how many people need to listen at the same time, the level controls and whether your interface can provide the cue mix you want. | If I’m recording a singer, I want to know whether they’ll have a usable headphone return and whether communication is needed. Around 21% of consumers are expected to want a singer to listen in. |
| Extra source or subwoofer | Decide whether you need a phone source or subwoofer control. A USB power connection does not automatically mean USB audio. | If I want to use my phone as a listening reference or switch off a connected subwoofer, those specific connections and features matter. Around 14% of consumers are expected to prioritise these features. |
Controlling speakers and providing a separate headphone mix are two different functions. A singer may therefore need a return route that the controller doesn’t provide.
Before buying, work out how many people will be listening at once and which output will provide the separate return signal.
You may also need a separate headphone amplifier or a controller with suitable cue routing.
On the PreSonus MicroStation BT, USB-C is for power only; the device doesn’t appear as an audio device on your computer.
Check the specifications for the exact model to see whether USB audio inputs and outputs are explicitly listed.
If your current setup doesn’t include a recording interface, you’ll still need a separate one.
According to Palmer, the MONICON M G2 has one stereo input and one stereo output. Different connector types don’t automatically mean you can switch between extra sources or pairs of speakers.
Count the independently usable source and speaker routes, then check that they match your equipment’s connections.
If you want to add a second pair of speakers later, you may need a controller with more switchable outputs.
The Big Knob Passive is designed for switching between analogue sources and speakers, while the Big Knob Studio adds headphone and talkback features.
The MONICON M G2 is designed for passive control of one stereo source going to one pair of stereo speakers.
The Nero is designed for a workspace with multiple pairs of speakers, a subwoofer route and several headphone listeners.
The MicroStation BT offers features for phone and subwoofer references, while the Monitor Station V2 is designed for more extensive speaker, cue and headphone routing.
The Baby RAM is a passive option for two stereo sources and two pairs of speakers.
The 2Control combines controls for two pairs of stereo speakers with support for two headphone listeners.
No, not always. First check whether your interface already has an easy-to-reach volume control and the listening routes you need. A separate controller can be useful if you want to switch directly between speakers or sources, or control mono and other listening functions without delay.
Connect the controller in the appropriate analogue listening chain, between an output on your audio interface and the inputs on your active speakers. Before you buy, check that the connections and the number of stereo inputs and outputs on the exact model are compatible with your equipment.
No. According to PreSonus, this connection is for power only, so the MicroStation BT doesn’t appear as an audio device on your computer.
You’re entitled to expect a product to be fit for purpose; according to the Dutch government, there is no fixed statutory period for the legal guarantee in the Netherlands. If a product is faulty, the seller is your point of contact. The assessment depends on factors including normal use and what you could reasonably expect from the product, as ACM ConsuWijzer explains.
Check the product information and markings for the specific model. According to Dutch government information, electrical equipment with Bluetooth is covered by radio equipment regulations; the relevant requirements apply to businesses that place such devices on the market or trade in them. A CE mark alone doesn’t prove that a particular item on offer has been independently assessed.