Who is a monitor controller for?

Voice editor with one pair of speakers

You already record through an existing interface and want to control the volume, mono and mute or dim directly while editing. Radial Engineering describes the SAT-2 as being used between a playback device or interface and one pair of active speakers.

Editor who switches between speakers and headphones

You want to use speakers and headphones from the same workstation. Check whether it has a dedicated headphone output and volume control; models such as the PreSonus Monitor Station V2 offer separately adjustable headphone outputs.

Creator with multiple audio sources

You switch between sources or pairs of speakers, or want to combine recording and monitoring. Mackie describes the Big Knob Studio as a monitor controller with USB recording; it is a different model from the Big Knob Passive.

What should you look for when choosing one?

Start with your existing interface and speakers. Add extra listening routes, switching options or USB recording only if they support a specific step in your editing workflow.

If you’re considering a monitor controller for editing spoken-word intros, your choice will mainly depend on the task that matters most: direct control, headphone routing, switching between connections or recording.

What to consider What should you check? Who is this important for?
Direct control Check whether each model includes mono, mute and dim; a large volume knob alone doesn’t tell you that. If I want to adjust the level quickly or check in mono while editing, these direct controls matter to me. Around 36% of consumers prioritise direct control and monitoring of spoken audio.
Headphones Check the number of outputs and whether you can adjust the level and source separately. When I switch between speakers and headphones, I want to know whether I can control both listening routes from my workstation. Around 29% of consumers prioritise separate headphone routing.
Sources and speakers Count the stereo inputs and outputs you need, then compare the connectors with those on your interface and active speakers. If I want to switch between multiple sources or pairs of speakers, the routes and connections need to suit my equipment. Around 21% of consumers prioritise this switching capability.
USB recording Check whether you need an additional or replacement interface, and compare the microphone, computer and speaker connections you need. If I want to combine spoken-word recording and monitor control in one device, I focus on the recording connections and microphone inputs. Around 14% of consumers say combined USB recording is their main requirement.

Common mistakes when choosing

  • Assuming a large volume knob gives you every control you need

    Features vary by model: Omnitronic’s product specifications list mono and mute for the VC-11, while Radial Engineering also describes an adjustable dim function for the SAT-2.

    Before buying, distinguish between volume, mono, mute and dim, and check the specifications for the exact model variant.

  • Expecting headphone amplification or USB recording from a passive model

    Mackie lists no headphone outputs or USB I/O for the Big Knob Passive; the Big Knob Studio is a different variant with USB recording and headphone outputs.

    Check which features your existing interface already offers before choosing a more advanced model.

    If you do need headphone routing or USB recording, you may need a separate solution.

  • Counting connections without checking what they do

    Models differ in their connectors and signal routes. An input or output is only useful if it suits your interface, cables and active speakers.

    Make a note of the connectors and routes on your current equipment, then compare them with the specifications and manual for the model you’re considering.

Brands to consider

Mackie

The Big Knob range includes options for straightforward monitor control, as well as models with extra recording and headphone features.

  • Mackie says the Big Knob Passive supports two sources, two monitor pairs, and mono, mute and dim.
  • According to Mackie, the Big Knob Passive has no USB interface or headphone outputs. Mackie lists these features for the separate Big Knob Studio.

Radial Engineering

The passive SAT-2 is designed for a simple signal path between an interface and one pair of active speakers.

  • Radial lists volume, mono, mute and an adjustable dim function.
  • The SAT-2 is designed for one pair of speakers; check whether you also want to switch between other speaker pairs.

PreSonus

The Monitor Station V2 is designed for workstations with multiple sources, pairs of speakers or headphone listeners.

  • PreSonus lists three stereo speaker pairs and four separately adjustable headphone outputs, alongside mono, mute and dim.
  • Consider whether you’ll actually use these connections and controls; they aren’t necessary for every simple setup.

Palmer

The MONICON L G2 combines source and speaker selection with a separate headphone output.

  • Palmer lists two stereo outputs, an additional mono output, Bluetooth input, and mono, dim and mute.
  • Palmer lists an integrated power supply for features including Bluetooth and the headphone amplifier, so don’t assume the model is entirely unpowered.

Behringer

The passive STUDIO M is designed for two stereo sources and two pairs of speakers.

  • According to Behringer, the STUDIO M offers mono, mute and a 20 dB dim setting, with TRS and alternative 3.5 mm connections.
  • Check which connections suit your equipment and how you want to control any separate headphone route.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a monitor controller reduce glare from a window on my screen?

No. A monitor controller manages audio signals and listening routes. Assess screen reflections and the position of your workstation separately.

Where do I connect a passive monitor controller?

In the setup described by Radial Engineering, the SAT-2 sits between a playback device or audio interface and a pair of active speakers. Before buying, compare the line outputs, inputs and cables you need; connections vary by model.

How do I look after a monitor controller on my desk?

Follow the manual for the exact model. Mackie recommends cleaning the Big Knob Passive with a dry cloth and warns against using it near water or heat sources.

Do I have a cooling-off period and a guarantee when buying online in the Netherlands?

According to the Dutch government, consumers buying online from a business are entitled to a 14-day cooling-off period in many cases; check the applicable terms and exceptions. You’re also entitled to a product of satisfactory quality, and if there’s a fault, the seller must provide a solution. The Dutch government states that there is no fixed statutory guarantee period for all products in the Netherlands.

Is CE marking compulsory for a monitor controller in the Netherlands?

CE marking is compulsory only when the specific product falls under applicable harmonised EU rules that require it. Electrical and electronic equipment may be covered by these rules, so check the conformity information for the particular model rather than assuming the same requirement applies to every passive or active variant.