Who can benefit from a monitor controller?

Solo mixer with few plug sockets

You already use an audio interface and active monitors, and want to control the listening level and check backing vocals in mono without adding another powered controller. Mackie and Palmer describe passive models for setups like these.

Mixer using reference sources

You want to switch between sources or pairs of speakers while mixing, and need to check that the connections will work with your existing equipment. Mackie, Behringer and Heritage Audio describe models with two stereo sources and two monitor outputs.

Producer recording vocalists

As well as monitoring through speakers, you may need a separately controlled headphone feed, cue mix or talkback. Mackie specifies these features for the Big Knob Studio; they are not included as standard with the Big Knob Passive.

What should you look for?

Start by checking the connection between your interface and monitors. Then decide whether you need to switch sources or speakers, and only add recording features if you’ll actually use them.

What to consider What should you check? Who is this important for?
Mono and no extra power supply Check that the exact model is passive, offers mono and connects to your interface and active monitors. Mackie, Palmer and Heritage Audio describe passive models; check the specifications for the version you’re considering. If I want to check vocals in mono quickly and don’t want the controller to use a plug socket, this is my top priority. Around 33% of consumers in this buying context prioritise mono and volume control without needing power for the controller.
Connections Compare your interface outputs and monitor inputs with the connections on the model. Palmer lists RCA for the MONICON S G2 and XLR/TRS for the MONICON M G2; Behringer says not to use the combo and 3.5 mm inputs on the MONITOR1 at the same time. If I want to keep using my existing interface, cables and speakers, the connections need to match exactly. Around 27% of consumers say compatibility with their existing equipment is their main requirement.
Sources and monitor pairs Count how many stereo sources and monitor pairs you actually want to connect. According to their manufacturers, the Mackie Big Knob Passive, Behringer STUDIO M and Heritage Audio Baby RAM each have two stereo sources and two monitor outputs. If I want to switch between a reference source or a second pair of speakers while mixing, I need those switching options. Around 20% of consumers prioritise switching between sources or monitor pairs.
Monitoring while recording Check the number of headphone outputs, whether their levels can be adjusted separately, and how cue and talkback are routed. Mackie specifies these features for the Big Knob Studio, not the Big Knob Passive. If I’m recording a vocalist, I want to know whether my existing interface already provides the headphone or cue routing I need. Around 20% of consumers prioritise separate monitoring features when recording vocals.

Buying pitfalls

  • Assuming ‘passive’ means ‘the whole studio works without power’

    A passive controller doesn’t need its own power supply, but in this setup it sits between your interface and active speakers. Those speakers still need their own power.

    Count the plug sockets needed for your entire existing setup, not just the controller.

  • Assuming related models have the same features

    Mackie doesn’t specify headphone outputs for the Big Knob Passive, but it does list separately controlled headphone levels, cue mix and talkback for the Big Knob Studio.

    Read the specifications for the full model name, and first check which features your interface already provides.

    If the headphone or cue function you need isn’t included, you may need an extra device.

  • Confusing a mono button with a separate mono output or a vocalist’s mix

    According to Palmer, the MONICON S G2 has one stereo output and a mono button; these are different features.

    Check mono monitoring, the number of physical outputs and any cue routing separately.

  • Assuming visible connections can all be used at the same time

    Behringer says not to use the combo and 3.5 mm inputs on the MONITOR1 at the same time.

    Map out the signal route you need, then check the connections and switching behaviour for the exact model.

    You may need a different cable setup or model if the connection combination you want doesn’t work.

Brands to consider

Mackie

The Big Knob Passive is designed for passive switching between two sources and two monitor pairs; the Big Knob Studio also has recording and monitoring features.

  • According to Mackie, the Big Knob Passive has mono, mute and dim functions.
  • The Big Knob Passive doesn’t have headphone outputs. Don’t assume it has features found on the Big Knob Studio, and check the power requirements for the version you choose.

Palmer

The MONICON S G2 is designed for a stereo setup with RCA connections, while the MONICON M G2 offers, among other things, XLR/TRS connections, mono, dim and mute.

  • According to Palmer, the MONICON S G2 and MONICON M G2 have a passive design.
  • The MONICON L G2 has an integrated power supply for features including Bluetooth and its headphone amplifier. An analogue signal path doesn’t mean that all its features work without power.

Behringer

The MONITOR1 is designed for one passively controlled pair of stereo monitors; the STUDIO M adds switching between two stereo sources and two monitor outputs.

  • According to Behringer, the MONITOR1 has mono and mute; the STUDIO M also has dim, according to its specifications.
  • Behringer says to use either the combo or 3.5 mm connection on the MONITOR1, not both at the same time.

Heritage Audio

The Baby RAM is a passive option with two stereo input and output pairs and balanced TRS connections.

  • Heritage Audio specifies mono, dim and mute, a 24-step volume control and no need for a power supply.
  • The brand’s claims about transparency or stereo imaging are not the same as an independent comparative test.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Can a passive monitor controller let my active studio monitors work without a plug socket?

No. ‘Passive’ means that the controller itself doesn’t need a power supply; active speakers still need their own power. Palmer describes the controller as connecting an audio interface to active speakers.

How do you connect and maintain a monitor controller?

First, compare the line outputs on your interface with the controller inputs, then compare the controller outputs with your monitor setup. Check the information for the exact model to see which connection combinations are supported. Mackie recommends cleaning the Big Knob Passive with a dry cloth.

Do you automatically need talkback when recording a backing vocalist?

Not necessarily. First check whether your interface already provides the headphone and cue routes you need. Mackie specifies cue mix, separately controlled headphone outputs and talkback for the Big Knob Studio, not the Big Knob Passive.

What return and warranty rights apply when buying online as a consumer in the Netherlands?

According to the Dutch government, in many cases you have 14 days to change your mind when buying remotely from a business; exceptions and the seller’s identity matter. ACM ConsuWijzer distinguishes between statutory rights and any seller or manufacturer’s warranty. If a product is faulty despite being used normally, the seller must provide an appropriate solution free of charge.

Does every passive monitor controller need a CE marking?

This can’t be established for every passive model. According to the Dutch government, CE marking only applies to product groups for which it is compulsory. Check the product documentation, and don’t judge whether a product is suitable based only on whether it has a CE marking.