Who can benefit from a monitor controller?

Vocal-layer mixer

Wants to check the stereo placement of vocal layers in mono quickly, with a control close to hand.

Student with one pair of monitors

Wants to turn down or mute their desk speakers straight away, without setting up a complex monitoring system.

Mixer who also listens on headphones

Needs a useful headphone route as well as speakers, and wants to know which models actually provide one.

What should you look for when choosing one?

Start by working out how many sources and pairs of monitors you actually use. Then decide whether you need a separate headphone route; extra connections aren’t automatically useful in a setup with just one pair of speakers.

What to consider What to look for Who is this important for?
Mono check for vocal layers Check whether the exact model has a mono switch and whether it works on the monitor route you use. If I want to quickly assess how my stereo mix sounds when the left and right channels are combined, I look for a mono switch on the right route. Around 36% of consumers say mono monitoring is their top priority.
Volume and mute Check that the control is easy to reach and that the model has the mute or dim function you want. If I want to turn things down quickly at my desk or cut the speaker signal, direct control matters. Around 29% of consumers put these controls first.
Headphone route Check the type of headphone output and whether its volume can be adjusted independently. If I want to listen on headphones as well as speakers, I need to know whether the controller has a suitable output. Around 21% of consumers say this is their top priority.
Connections and source selection Compare the stereo inputs and outputs you need with the connections on your audio interface and speakers. If I want to switch between sources or pairs of monitors, I first check that the connections suit my setup. Around 14% of consumers say multiple monitoring routes are their top priority.

A mono switch doesn’t change the recording; it switches the monitoring signal to mono. iZotope explains why mono compatibility matters in stereo mixes. Also check the features listed by the manufacturer for each model: Mackie and Palmer, for example, specify mono, mute and dim controls on certain models.

Common buying mistakes

  • Mistaking a passive monitor output for a headphone socket

    A passive controller doesn’t automatically include a headphone amplifier. ESI states that the MoCo doesn’t have one, so extra monitor outputs don’t mean you can connect headphones to it.

    Check where you’ll connect your headphones and whether you need independent volume control.

    If the controller doesn’t have a suitable headphone route, you’ll need to use the headphone output on your existing interface or a separate headphone amplifier.

  • Confusing USB-C with audio over USB

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only, so it doesn’t automatically make the device a USB audio interface.

    Look for USB audio functionality in the specifications for the exact model, not just a USB connection.

    If you want to send audio to a computer over USB, you’ll still need a suitable audio interface for this function.

  • Choosing more monitor pairs than you use

    The Palmer MONICON M G2 specifies one stereo output, while the Mackie Big Knob Passive and ESI MoCo specify two stereo outputs. An extra output is of little use if you only use one pair.

    Map out your current and planned signal paths, then work out how many stereo inputs and outputs you need.

    Unused switching features and extra connection cables can make your setup unnecessarily complicated.

Brands to compare

Palmer

Palmer specifies one stereo output with mono, dim and mute controls for the MONICON M G2. The MONICON L G2 adds source selection, two stereo outputs and an independently adjustable headphone output, among other features.

  • The models differ clearly in the number of routes and their headphone controls.
  • These are manufacturer specifications, not the results of an independent listening test. The M G2 doesn’t have the same output and headphone features as the L G2.

Mackie

Mackie specifies two stereo inputs and two monitor outputs for the Big Knob Passive, with mono, mute and dim controls.

  • The extra source and monitor routes may suit you if you’ll actually use them.
  • These specifications don’t indicate an integrated headphone amplifier. Mackie’s claims about sound and build quality are brand claims.

ESI

ESI specifies two stereo inputs, two stereo outputs, and mono and mute controls for the MoCo.

  • The specified connections let you choose between two stereo sources and two pairs of monitors.
  • ESI states that the passive MoCo has no integrated headphone amplifier and doesn’t convert an unbalanced input signal to balanced.

PreSonus

PreSonus positions the MicroStation BT for use with active speakers, Bluetooth or an analogue source, and control of an optional subwoofer.

  • Bluetooth and an analogue source give you more ways to play audio.
  • PreSonus states that USB-C is for power only. The listed features don’t include a mono button.

Behringer

Behringer specifies the MONITOR1 as a passive stereo volume controller with XLR/TRS combo inputs, XLR outputs and 3.5mm connections.

  • These connections may be useful if they match your existing equipment.
  • Check the features you need individually; the available information doesn’t confirm a separately adjustable headphone route. Behringer’s claims about precision and transparent sound are brand claims.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a monitor controller improve my vocal harmonies by itself?

No. A monitor controller adjusts or switches the monitoring signal. A mono button lets you assess how a stereo mix sounds in mono; vocal tuning, timing and editing are done elsewhere in the production process.

How do I connect a passive monitor controller?

First, compare the outputs on your audio interface with the controller’s inputs, and the controller’s outputs with your speakers. Palmer specifies, among other things, balanced XLR/TRS combo inputs and XLR outputs for the MONICON M G2; an unbalanced source connected to the ESI MoCo isn’t automatically converted to balanced.

Is a controller with USB-C automatically an audio interface too?

No. PreSonus states that the MicroStation BT’s USB-C connection supplies power only. Check whether USB audio is explicitly supported on the exact model.

Does every passive monitor controller have a headphone amplifier?

No. ESI states that the passive MoCo has no integrated headphone amplifier. Check whether the model has a headphone output and the volume control you need, or use the headphone route on your existing interface.

Can I use speakers at any time in a student bedroom?

There isn’t one rule that applies to every student bedroom. The Dutch Government advises trying to agree arrangements first if neighbours are being disturbed; also check the rules that apply to your home and local area.