Vocal harmony mixer
Wants to check backing vocals in mono quickly, adjust the monitoring volume and switch between reference speakers when needed.
Choose a controller based on what you actually need to operate while mixing. For volume, mono and switching between sources or pairs of speakers, a simple controller may be enough. When recording singers, separate headphone cue mixes and talkback matter more. Check that the connections are compatible with your interface, too. A physical control knob makes adjustments more direct, but it won’t fix reflections or an asymmetrical speaker setup by the window.
Wants to check backing vocals in mono quickly, adjust the monitoring volume and switch between reference speakers when needed.
Needs a monitoring route for one or more singers as well as their own mix, and may also need talkback to communicate during recording.
Wants controls within easy reach without constantly looking at the screen. It’s also worth checking the symmetry of your listening setup and any reflections. Genelec emphasises that similar reflections on the left and right are important for stereo imaging.
A good fit if: you already have a suitable audio interface and mainly want to control volume, mono, mute, or switch between sources and pairs of speakers.
Keep in mind: this type doesn’t automatically provide a headphone route for singers; check the connections on the exact model.
A good fit if: you need separate headphone routes for singers and a way to communicate from the control position during recording.
Keep in mind: more connections and routing require space and setup; the controller won’t provide any recording channels you don’t already have.
A good fit if: you use one pair of active speakers with a subwoofer and want to be able to switch the sub off quickly.
Keep in mind: a sub bypass doesn’t replace multiple separate headphone cue mixes or talkback.
| What to consider | What to check before buying | Who is this most important for? |
|---|---|---|
| Mono and reference speakers | Check that it has mono, the number of stereo outputs you need and the required volume controls. | If I want to assess harmonies in mono and switch quickly between references, this is my top priority. Around 36% of consumers prioritise mono and reference monitoring. |
| Singer cue and talkback | Check for separate headphone controls, a Main/Cue selection and whether your interface can provide the cue mix you need. | If you record singers, you’ll want them to have their own monitoring mix and to be able to communicate from the control position. Around 29% of consumers prioritise this need. |
| Connections | Compare the analogue inputs and outputs with your interface, speakers and any subwoofer; check the function of USB on each model, too. | If I want to connect my existing studio setup without an unsuitable signal path, the connections are crucial. Around 21% of consumers prioritise compatibility with their current equipment. |
| Controls and listening position | Look for easily accessible volume, mono and mute controls, and consider the speaker and listening positions separately. | At a workspace by a window, I want the controls within easy reach while still being able to assess the left and right sides properly. Around 14% of consumers prioritise direct control from that position. |
Mackie says the Big Knob Passive has no headphone outputs. A volume knob alone therefore won’t automatically provide a separate monitoring mix for singers.
Count how many people need to listen at the same time, then check the cue route, headphone outputs and talkback on the exact model.
A separate headphone amplifier or additional routing may be needed to provide a dedicated monitoring route.
On the PreSonus MicroStation BT, USB-C is for power only; it doesn’t carry audio to the computer.
Check what each connection does in the documentation for your chosen model and, if necessary, keep your existing audio interface in the signal path.
You’ll still need a separate audio interface for recording and audio transfer.
A controller won’t change room reflections or the left-to-right symmetry of your speaker setup.
Assess the speaker and listening positions separately from your choice of controller, paying attention to differences between the left and right sides.
The Big Knob Passive is designed for straightforward passive stereo control; the Big Knob Studio is a separate model.
The Monitor Station V2 is designed for multiple speaker pairs and headphone routes, while the MicroStation BT is for a compact stereo-plus-sub setup.
The Nero is a desktop controller for multiple sources, speaker pairs, headphone routes and talkback.
The MONICON XL is designed for setups with multiple monitor pairs and mono compatibility checks.
No, a monitor controller won’t correct room reflections or speaker positioning. Assess the left-to-right symmetry of your speakers and listening position separately.
Not necessarily. Check that the controller has a separate Main/Cue route and a controllable headphone output, and that your interface can provide the cue mix you need. The PreSonus Monitor Station V2 lets you select Main/Cue for each headphone output.
No. According to PreSonus, USB-C on the MicroStation BT is for power only, and the device won’t appear as an audio interface on your computer through that connection.
Follow the manual for the exact model. Mackie recommends using a dry cloth for the Big Knob Studio series. If the unit is damaged or exposed to moisture, the manual advises contacting qualified personnel.
Electrical and electronic equipment must meet the applicable EU safety and electromagnetic compatibility requirements, including CE marking and an EU Declaration of Conformity. The Low Voltage Directive applies only within its statutory voltage range; Bluetooth equipment must also comply with the applicable radio equipment rules. Check the conformity of the specific product, not just its brand name.