If you mix in stereo using one pair of speakers, start with direct volume control and features such as mono, dim and mute; extra routing is only useful if you actually need it. Choose switchable speaker outputs for multiple stereo pairs, separate headphone and cue functions for other listeners, or a dedicated multichannel model if you need to monitor individual surround channels. Check the exact model’s connections, power requirements and space needed, including for cables.
Who is a monitor controller for?
Stereo mixer with limited desk space
You want monitoring volume and features such as mono, dim or mute within easy reach, perhaps with just one pair of speakers. Palmer lists the MONICON M G2 as measuring 160 × 62 × 106 mm; when checking whether it will fit, allow for the connections and cables too.
Mixer working with a colleague or an extra monitoring setup
You want to switch between stereo speaker pairs, or give other listeners their own headphone level and cue. Decide which matters most: Mackie says the Big Knob Passive selects between two sources and two monitor pairs, while PreSonus specifies four individually controlled headphone outputs with Main/Cue selection for the Monitor Station V2.
Mixer working on multichannel theatre audio
You need to monitor individual surround or immersive channels; switching between stereo speaker pairs is not the same thing. SPL describes the SMC 7.1 as a controller for 7.1 sources, while Grace Design specifies support for speaker systems of up to 24 channels for the m908.
What should you look for when choosing one?
| What to consider |
What should you check? |
Who is this important for? |
| Direct stereo control |
Check whether you need one stereo output and whether the controls and connections will fit on your desk. |
Want to adjust the volume or use mono, dim and mute quickly while mixing, without a larger routing setup? Around 36% of consumers prioritise compact stereo control in a small workspace. |
| Switching between stereo setups |
Count the stereo sources and speaker pairs you want to connect and monitor. |
If you regularly compare two stereo speaker pairs or sources, separate selection matters more than just having a volume knob. Around 29% of consumers prioritise switching between setups or sources. |
| Headphones and cue |
Count the number of people listening at the same time, and check the level control and source selection available for each output. |
If colleagues or performers need to listen at the same time, check whether each person can choose their own level and the right cue source. Around 21% of consumers give top priority to extra listeners and cue. |
| Individual surround channels |
Confirm the channel format, then compare the required inputs and outputs with your entire signal chain. |
If you need to check your soundtrack through individual surround or immersive channels, switching between stereo pairs is not enough. Around 14% of consumers prioritise multichannel monitoring. |
Common buying mistakes
-
Mistaking two stereo speaker pairs for surround channels
A controller that switches between stereo monitor pairs does not automatically provide individual surround outputs. Mackie describes the Big Knob Passive as offering stereo monitor pairs; SPL describes the SMC 7.1 separately as a model for 7.1 channels.
Confirm your soundtrack’s delivery format before choosing how many monitoring channels you need.
-
Mistaking a volume control for a headphone and cue solution
Mackie’s model comparison says the Big Knob Passive has no headphone output. PreSonus specifies four individually controlled headphone outputs with Main/Cue selection for the Monitor Station V2.
Count the number of people listening at the same time, and check that each output offers the level and source selection you need.
-
Looking only at the unit’s dimensions
A controller also needs enough space for accessible connections and attached cables. Palmer lists the dimensions and various connection types for the MONICON M G2.
Measure the available space, including plugs, and compare the inputs and outputs with the equipment you want to connect to the controller.
Brands worth considering
Palmer
Palmer positions the MONICON M G2 as a compact passive controller for a single stereo monitoring path.
- Palmer lists mono, dim and mute, balanced connections and 3.5 mm connections. The stated dimensions are 160 × 62 × 106 mm.
- The stated stereo output is not a second, separately switchable speaker output.
Mackie
Mackie describes the Big Knob Passive as a passive source and monitor selector; the separate Big Knob Studio combines monitor control with a USB interface.
- Mackie says the Big Knob Passive lets you select between two sources and two monitor pairs, with mono, mute and dim. Mackie also states that this model does not need a power supply.
- Mackie’s model comparison does not list a headphone output for the Big Knob Passive. According to Mackie, the Big Knob Studio has two independently controlled headphone outputs; check that the additional interface suits your existing setup.
PreSonus
According to PreSonus, the Monitor Station V2 is designed for stereo monitoring with multiple sources, speaker pairs and listeners.
- PreSonus specifies three stereo speaker pairs, four independently controlled headphone outputs with Main/Cue selection, and talkback.
- The stereo outputs listed are not the same as individual surround channels.
SPL
SPL describes the 2Control as a stereo solution for two sources and two speaker setups. The separate SMC 7.1 is designed for multichannel monitoring.
- According to SPL, the 2Control lets you select between two stereo sources and two stereo speaker setups, and has two headphone connections.
- The 2Control and SMC 7.1 are different models for different monitoring setups; check your project’s channel format.
Grace Design
Grace Design describes the m908 as a monitor controller for speaker systems ranging from stereo to immersive.
- The manufacturer lists support for speaker systems of up to 24 channels.
- According to the manufacturer, the m908 consists of a separate main unit and remote control, and requires a power supply. Check the channel routing as well as where it will fit on your desk.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I use a passive monitor controller without an additional power supply?
It depends on the model. Mackie’s manual says the Big Knob Passive does not need a power supply; don’t assume this applies to other models or to features such as a built-in headphone amplifier.
How do I connect the controller to my current setup?
First compare the outputs on your audio interface with the inputs on the exact controller model, then compare the controller’s outputs with your speakers. Palmer lists balanced XLR/TRS combo inputs and XLR outputs for the MONICON M G2, as well as 3.5 mm connections. Remember to leave room for the cables too.
What can I do if the controller develops a fault during normal use?
Contact the seller. According to the Government of the Netherlands, statutory rights entitle you to a product that works as it should; there is no fixed statutory guarantee period in the Netherlands. What you can expect depends, among other things, on the product and its price. An additional manufacturer’s warranty does not replace those rights.
Do I have a cooling-off period when buying online?
For many eligible consumer purchases made at a distance, the Government of the Netherlands says you have a 14-day cooling-off period. When placing your order, check who the seller is and which terms and any exceptions apply.
Does a monitor controller sold in the Netherlands have to comply with product safety rules?
Applicable European product rules apply to electrical and electronic equipment sold in the Netherlands. Official information from Business.gov.nl includes requirements relating to electrical safety and electromagnetic compatibility; the rules and any CE marking obligations depend on the product. CE marking alone says nothing about audio performance.