Who might benefit from a monitor controller?

Mixer with one pair of monitors

You want speaker volume within easy reach and the option to listen to your mix in mono. Mackie, Palmer and Behringer list mono and mute functions on specific models.

Student who often listens quietly

You switch between speakers and headphones and want to know which device is driving your headphones. Mackie states that the Big Knob Passive has no headphone output; PreSonus and Audient list one on the models mentioned here.

Mixer with several monitoring options

You use more than one source or pair of speakers, or need a separate route for someone listening in. Mackie specifies two sources and two monitor pairs for the Big Knob Passive; Audient describes Nero as having multiple speaker and headphone outputs.

What should you look for in a monitor controller?

First check whether your interface already offers the controls and monitoring options you need. Then choose based on what you actually want to add: an easy-to-reach volume control, headphone monitoring, or the ability to switch between sources and speakers.

What to consider What should you check? Who is this important for?
Direct volume control Check that the controller fits between your interface and speakers, and that the volume and mute controls are easy to reach. When I’m mixing in a small room, I want to adjust speaker volume straight away without reaching for an interface that’s awkward to get to. Around 31% of consumers put direct volume control first.
Headphone monitoring Check whether your interface already has a suitable headphone output. If not, check the output and level control on the exact controller model. When I want to listen quietly, it should be clear which device is driving my headphones and whether I can adjust the level. Headphone monitoring is also the top priority for around 31% of consumers.
Mono, dim and mute Check which features the specific model version has; don’t assume it includes features found on another model in the same range. If I want to check mono quickly or mute the speaker signal, physical buttons are handy, as long as my existing equipment doesn’t already do the job. For around 23% of consumers, these mixing controls are the most important factor.
Connections and routing Map out the route from your interface to the controller, speakers and headphones. Count the separate inputs and outputs, and check the connections on each model. If I want to use more than one source or pair of speakers, the model must actually be able to switch between those routes; having different types of connection doesn’t automatically mean it can. Around 15% of consumers choose mainly on the basis of connections or expansion options.

Monitor controller buying pitfalls

  • Assuming a passive speaker controller is a complete headphone solution

    A passive speaker controller doesn’t automatically have a headphone output. For example, Mackie lists no headphone output for the Big Knob Passive.

    First check which headphone output your interface already has and whether you also need separate level control.

    If you need a headphone route that your current equipment doesn’t offer, you may need a separate device or a different controller model.

  • Assuming different connector types mean you can switch between multiple sources

    Palmer specifies one stereo input and one stereo output for the MONICON M G2. Behringer states that the listed input types on the MONITOR1 can’t be used at the same time.

    Count the separate stereo routes you need and check which inputs can be used simultaneously.

    You may need a different controller or suitable cables if the connections don’t match your setup.

  • Paying for extra features without a plan to use them

    Subwoofer, Bluetooth and talkback features are available on specific models and aren’t automatically necessary for a simple setup.

    First map out the monitoring routes you use now and decide which extra routes you actually need.

    A more elaborate setup may require extra equipment, power or cabling.

Brands to consider

Mackie

The Big Knob Passive is a passive controller for two sources and two monitor pairs.

  • Mackie specifies mono, mute and dim for the Big Knob Passive.
  • Mackie lists no headphone output for this model. Don’t assume it has features of the Big Knob Studio based on the product name alone.

Palmer

The MONICON M G2 is a passive controller for one stereo route; the MONICON L G2 is a separate model with more routes and headphone control.

  • Palmer specifies mono, dim and mute for the M G2.
  • The M G2 has one stereo input and one stereo output. Palmer says that some features of the L G2, including the headphone amp, require power.

Behringer

The MONITOR1 is a passive controller for one speaker route, with mono and mute.

  • Behringer specifies combination inputs and connections for different plug types.
  • Behringer says the listed input types can’t be used at the same time, so different connections don’t automatically mean separately switchable sources.

PreSonus

PreSonus describes the MicroStation BT as having a headphone/aux output and a route for a subwoofer.

  • Sub bypass can be useful if your setup actually includes a subwoofer.
  • The listed features don’t mean the model has the same separate headphone routes as more advanced controllers.

Audient

Audient describes Nero as offering extensive source, speaker and headphone routing, including talkback.

  • Audient specifies three stereo speaker outputs and four headphone outputs for Nero.
  • In a setup with one interface and one pair of monitors, extra routes may go unused. This is a trade-off based on your setup, not a performance test.

Monitor controllers at Joybuy

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily, if your interface already offers an easy-to-reach volume control and the monitoring options you need. A separate controller is most useful when you’re missing hands-on controls or switching options.

How do I connect a simple passive controller?

A controller with suitable line-level connections goes between your interface output and the inputs on your active speakers. Check the connections on all your equipment first; Palmer specifies one stereo route for the MONICON M G2.

How can I listen sensibly during long mixing sessions?

Keep your listening volume under control and take breaks. In information dated 6 March 2026, the World Health Organization gives a maximum of 40 hours a week at an average of 80 dB as an example. This is exposure advice, not a guaranteed safe setting for a controller’s volume knob.

What are my rights when buying online or if a product is faulty in the Netherlands?

When you buy online from a business, you usually have a 14-day cooling-off period, with some exceptions. If a product is faulty, contact the seller: according to the Dutch government, they must deal with the problem and can’t simply refer you to the manufacturer.

Is CE marking relevant for a Bluetooth controller?

CE marking is required when the applicable harmonised EU product rules say it is. Radio equipment is also covered by the EU Radio Equipment Directive. Check the product information for the specific model to find out which rules apply.