Who is a monitor controller for?

Stereo mixing at a single desk

You mix through an existing interface and want to control your monitoring volume and functions such as mono and mute directly, without unnecessary extra listening routes. Mackie and Palmer describe models for passive stereo control.

Mixing with multiple listening routes

You compare pairs of speakers or also use a subwoofer or headphones. Match the available connections and switches to your setup; Drawmer and PreSonus describe controllers with additional listening routes.

Mixing a surround project

You need to monitor actual discrete 5.1 or 7.1 channels. The required delivery format and your interface’s outputs determine which connections you need; Drawmer describes the CMC7 for discrete channels.

What should you consider when choosing one?

Simple stereo control

A good fit if: your interface supplies the signal and you mainly want to control volume, mono or mute from your desk.

Bear in mind: count the separately selectable sources and pairs of monitors; having different connector types does not automatically mean you have extra routes.

Multiple stereo listening routes

A good fit if: you want to switch between pairs of monitors, a subwoofer or other listening routes while mixing.

Bear in mind: this is still stereo control and does not replace a controller for discrete surround channels.

Headphones and collaboration

A good fit if: your sessions need separate headphone routes, cue selection or talkback.

Bear in mind: a cue route will only work as intended if your setup can provide the separate signal it needs.

Discrete 5.1 or 7.1 monitoring

A good fit if: your project requires monitoring through separate surround channels.

Bear in mind: check the channel assignments, interface outputs and cabling; an extra pair of stereo monitors is not a surround setup.

Consideration What should you check? Who this matters to
Direct stereo control Check whether your interface already offers these controls and whether the controller has suitable stereo inputs and outputs. If I want to adjust the volume quickly from my desk or use mono and mute, direct control is my priority. Consumers who primarily need stereo control account for around 37% of this decision-making group.
Multiple speaker routes Count the pairs of monitors and check which stereo and subwoofer outputs can be selected separately on each model. If I want to compare existing or planned pairs of speakers, the controller must genuinely be able to switch between those routes. Around 27% of consumers prioritise comparing speaker routes.
Headphones or collaboration Check how many headphones you need to connect, whether you need a separate cue signal and how that signal is supplied. When I work with others or need a separate headphone route, connections and cue selection are key. Consumers who mainly need listening or collaboration features make up around 18% of this group.
Discrete surround channels Confirm the delivery and monitoring formats, then compare the interface outputs and connector wiring with the controller. If my project requires separate 5.1 or 7.1 monitoring, I need discrete channel control rather than stereo switching alone. Around 18% of consumers in this decision-making group prioritise surround monitoring.

Common buying mistakes

  • Assuming film production automatically means surround

    The word ‘film’ does not determine whether you need to monitor in stereo or 5.1/7.1. Choosing too many or too few channels could mean the controller is unsuitable for your project.

    Check the required delivery and monitoring formats before choosing the number of channels.

    A multichannel setup may require extra equipment and cabling; a stereo controller is not enough when discrete channels are required.

  • Counting connections as extra listening routes

    According to Palmer, the MONICON M G2 has one stereo input and one stereo output, despite offering different connection options. Connector types alone do not tell you how many separate routes you can select.

    Count the sources and pairs of speakers that can be switched separately.

    If you want to switch between more routes later, you may need additional switching equipment.

  • Choosing a passive controller for headphones

    Mackie lists no headphone output for the Big Knob Passive, while Drawmer says the CMC2 does have one. The models therefore differ in this respect.

    First check whether your interface already handles the headphone route.

    If you cannot control that route through your interface, you may need a separate headphone solution.

Brands to consider

Mackie

The Big Knob Passive is designed for passive stereo control, with two sources and two pairs of monitors. The Studio versions are separate models with different features.

  • Mackie says the Big Knob Passive has mono, mute and dim functions.
  • According to Mackie’s product information, this model has no headphone output. The manufacturer’s sound quality claims are not based on independent listening tests.

Palmer

The MONICON M G2 is designed for a single stereo route; the MONICON L G2 has more outputs and a different set of features.

  • Palmer lists mono, dim and mute for the M G2; the L G2 has two stereo outputs and a mono output.
  • According to Palmer, the M G2 offers one stereo input and one stereo output as listening routes. Check that the L G2’s additional features suit your setup.

Drawmer

The CMC2 is designed for stereo use with additional monitor and headphone routes; the CMC7 is intended for projects with discrete surround channels.

  • Drawmer specifies two stereo monitor outputs and a mono subwoofer output for the CMC2; for the CMC7, the manufacturer lists eight discrete channels.
  • The CMC2 is not a controller for eight discrete surround channels. With the CMC7, check that the D-sub connections and channel wiring are compatible with your equipment. Claims about transparency come from Drawmer.

PreSonus

The Monitor Station V2 is designed for a stereo setup with multiple sources, pairs of speakers, headphones and optional talkback.

  • PreSonus specifies three selectable stereo speaker pairs, four headphone outputs and a talkback microphone.
  • These features do not automatically make the model suitable for separate 5.1 or 7.1 channels.

Audient

Audient describes the Nero as a solution for a stereo studio with multiple speaker and headphone routes.

  • Audient lists three stereo speaker routes, an assignable subwoofer output and four headphone outputs.
  • Audient’s claims of exceptionally accurate or tonally neutral reproduction have not been independently verified here.

Related products

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller alongside my audio interface?

No, not always. First compare your interface’s volume controls and listening routes with what you’re missing while mixing. A separate controller can be useful if you want to control or switch routes directly from your desk; the features you need depend on your setup.

Can I monitor a 5.1 film mix with a stereo monitor controller?

Not if the controller only switches between stereo speaker routes. To monitor separate 5.1 channels, the entire signal chain must support the necessary discrete channels and connections. Drawmer specifies this capability for the CMC7, not the stereo CMC2.

What should I check when connecting and using it day to day?

Compare the connections on your interface, controller and speakers; with the Drawmer CMC7, also check the D-sub channel wiring. Start at a low monitoring volume and use mute or dim when switching between listening routes. Prolonged exposure to loud sound can damage your hearing.

What do the cooling-off period and warranty mean when buying online in the Netherlands?

For online purchases from a business, you will often have a 14-day cooling-off period, according to the Dutch government; check whether the terms apply to your purchase. You are also entitled to a product that works properly and can contact the seller if something is faulty. The Dutch government explains that the Netherlands has no fixed statutory warranty period.