Who is this choice relevant to?

Stereo mixer with two screens

You use your screens for picture and audio editing, but deliver a stereo mix. Choose a controller to suit your stereo sources and speakers; the number of screens does not determine how many audio outputs you need.

Film mixer monitoring in surround

You need to be able to assess individual surround channels. The Drawmer MC7.1 is one example of a controller for which the manufacturer specifies 7.1 routing. Check that the rest of your setup supports the same channel layout, too.

Mixer at a shared workstation

You may need to switch between sources or speakers, and want separate headphone routes or talkback for others. Audient and Palmer specify different combinations of speaker outputs, headphone routes and communication features.

What should you look for?

First, compare your required delivery format with the outputs on your audio interface and the channels on your speakers. Then consider the additional routes your workstation actually needs.

What to consider What to look for Who is this important for?
Audio format and channel routing Compare your delivery format and the connections on your interface and speakers with the controller’s specified inputs and outputs. If I’m mixing a soundtrack in stereo, I don’t need a discrete surround route; for separate 5.1 or 7.1 channels, the controller must explicitly support them. Around 33% of consumers prioritise the right audio format.
Comparing speaker pairs Count the stereo pairs you want to connect and check whether switching and, where available, level control are provided for each output. If I want to check my stereo mix on different speaker pairs, I need a suitable switching route; screens don’t change that. Around 25% of consumers prioritise comparing speaker pairs.
Shared monitoring and communication Count the people who need to listen at the same time and check the headphone outputs, cue routing and talkback on each model. If others need to listen or communicate at the same time, I need suitable headphone routes and, possibly, talkback. Around 25% of consumers prioritise shared monitoring or communication.
Simple operation Check whether your existing stereo setup would benefit from an easy-to-reach volume control and features such as mono, mute or dim. If I mainly want quick volume control and to keep my existing stereo setup, a simpler model may be a good fit. Around 17% of consumers prioritise simple, easy-to-reach controls.

Common mistakes

  • Confusing two monitors with two screens

    On an audio monitor controller, a monitor output refers to a speaker monitoring route; it does not indicate video switching.

    Map out your video and audio routes separately before deciding how many connections you need.

  • Confusing two stereo pairs with discrete surround

    A specification for two pairs of stereo speakers does not show that a controller can route individual surround channels.

    Check the channel layout and compare it with the connections on your interface and speakers.

  • Choosing a passive stereo control when you need extra routes

    The Mackie Big Knob Passive is designed for stereo routing; the manufacturer does not specify a built-in headphone output or USB I/O for this model.

    Count your sources and listeners, and make a note in advance of whether you need independent cue, headphone routes or talkback.

Brands to compare

Mackie

The Big Knob Passive is a straightforward, passive stereo routing option for anyone who wants to control two sources and two pairs of monitors.

  • Mackie lists mono, mute and dim as direct control features on the Big Knob Passive.
  • This model is not a discrete surround controller and, according to its product specifications, has no built-in headphone output or USB I/O. Features of the Big Knob Studio do not automatically apply to the Passive.

Audient

The Nero is a stereo-focused option for a workstation with multiple speaker and headphone routes.

  • Audient specifies three stereo speaker outputs, four headphone outputs and talkback for the Nero.
  • These stereo outputs do not, on their own, demonstrate discrete 5.1 or 7.1 monitoring.

Palmer

The active MONICON XL may suit you if you need multiple stereo speaker outputs and a choice of headphone routes.

  • Palmer lists three speaker outputs, two headphone outputs and a mono sum output for the MONICON XL.
  • A mono sum output does not, by itself, make this model suitable for discrete surround routing.

Drawmer

The MC7.1 is the option considered for a workstation that needs to monitor stereo and individual surround channels.

  • Drawmer specifies 7.1 routing and channel-specific control features for the MC7.1.
  • The connections must match the channel layout and connections of the rest of your setup.

Monitor controllers at Joybuy

Related products coming soon.

Frequently asked questions

Do you need a controller with two monitor outputs because you have two screens?

No, not just because you have two screens: monitor outputs on an audio controller are for your monitoring speakers, not video screens. Choose the number of audio outputs to suit your speaker setup and mix format.

Can you use a stereo controller to monitor a discrete 5.1 mix?

Not as a complete, separately routed 5.1 monitoring path if the model only specifies stereo sources and stereo speaker pairs. Compare the number of channels you need with the controller’s explicit surround routing and the connections on your other equipment.

What should you check before connecting the controller?

First, check the connections and channel layout of your audio interface, controller and speakers. Connect audio sources to the inputs and the correct speaker channels to the outputs; start with the monitoring volume turned down low. Your screens remain part of the separate video chain.

Who can help if a product develops a fault after a private purchase in the Netherlands?

Under the statutory guarantee, the seller is responsible for putting things right if the product does not meet what you could reasonably expect under normal use, according to the Government of the Netherlands. A manufacturer’s guarantee does not replace this right; business purchases are not necessarily covered by these consumer rules.

Is CE marking required for the monitor controller you choose?

That depends on the product rules that apply to the specific version. The Government of the Netherlands explains that CE marking is required for product groups covered by such rules and must not be applied arbitrarily. Check the documentation for the specific device and any power supply, rather than assuming CE marking is required for every model.