Who is a monitor controller for?

Solo editor with one pair of speakers

You mainly want to control your monitoring volume, and perhaps mono, dim and mute, directly, without paying for features your existing interface already provides. Mackie and Palmer describe these controls on the Big Knob Passive and MONICON M G2 respectively.

Quiet headphone editor

You want to be able to switch off your speakers and keep listening to your demo through a suitable headphone route, so check whether your interface already provides one. Mackie and PreSonus describe different headphone and monitoring features on their various models.

Creator with multiple monitoring routes

You regularly switch between pairs of speakers or have someone else listen in while you record. Check the number of outputs, cue selection and independent level controls; Audient and PreSonus describe these features on specific models.

What should you look for?

Keep using your audio interface

A good fit if: you use one pair of speakers, can easily reach the volume control and your interface already provides the headphone route you want.

Bear in mind: you won’t gain physical mono, dim or switching controls if your interface doesn’t already have them.

Choose a simple passive controller

A good fit if: you mainly want a physical volume knob and direct mute, dim or mono controls.

Bear in mind: models such as the Palmer MONICON M G2 have one stereo input and one stereo output; the Mackie Big Knob Passive can switch between two sources and two pairs of monitors.

Choose a controller with extra monitoring or recording features

A good fit if: you need multiple headphone routes, independent levels, cue selection or a USB recording interface.

Bear in mind: the Mackie Big Knob Studio has a USB recording interface and two headphone outputs; Audient says the Nero offers multiple speaker and headphone routes.

Add another source or a subwoofer route

A good fit if: you want to connect an additional source or switch off a connected subwoofer independently.

Bear in mind: PreSonus lists Bluetooth and Sub Bypass on the MicroStation BT; according to PreSonus, its USB-C connection is for power only, not USB audio.

What to consider What to look for Who will find this most important?
Direct volume control Compare the controls you already have with the exact model’s physical volume, mute and dim functions. When I’m editing, I want an easy-to-reach knob so I can quickly adjust the monitoring volume. Around 36% of consumers prioritise direct control.
Quiet headphone listening Check whether there’s a headphone output, whether its volume can be adjusted independently and what happens when you mute the speakers. When I switch off the speakers, I want to keep listening to the demo through a suitable headphone route. Around 29% of consumers prioritise quiet headphone listening.
Multiple pairs of speakers or sources Count stereo sources and pairs of speakers separately, then check that you have the right number of connections and outputs. If I want to switch between connected pairs of speakers or sources, each route needs to be available separately. Around 21% of consumers prioritise comparing monitoring routes.
Additional source, subwoofer or recording route Decide whether you need USB audio, power only, a subwoofer output or a cue route, and check the exact model. If my set-up includes an additional device or separate monitoring route, I want to know which connections actually support it. Around 14% of consumers prioritise an additional source, subwoofer or recording route.

Common connection mistakes

  • Mistaking a passive volume controller for a headphone amplifier or USB interface

    According to Mackie, the Big Knob Passive has no USB I/O or headphone outputs. The Big Knob Studio does have these features, so the model variant matters.

    Check which routes your interface already provides, and compare the full model name and specifications, not just the series name.

  • Assuming a USB-C connection automatically carries computer audio

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only.

    If you want to use the controller as an audio device with your computer, look specifically for USB audio or recording functionality.

  • Connecting a line-level controller after an amplifier

    Radial Engineering warns that a speaker-level signal can damage the SAT-2.

    Use the SAT-2 only with a line-level signal, as specified by Radial Engineering.

Brands and models to consider

Mackie

The Big Knob Passive is designed for hands-on monitor control, while the Big Knob Studio adds USB recording and headphone outputs, according to Mackie’s model specifications.

  • According to Mackie, the Big Knob Passive offers mono, mute and dim, and can switch between two sources and two pairs of monitors.
  • The Passive has no USB I/O or headphone outputs; these features aren’t available on every version.

Palmer

The MONICON M G2 is designed for one compact stereo route, while the MONICON L G2 offers more outputs and headphone control, according to Palmer.

  • Palmer lists mono, dim and mute on the M G2; the L G2 has two stereo outputs and a headphone output with its own volume control.
  • The MONICON M G2 has one stereo input and one stereo output; check that it suits your existing signal path.

PreSonus

The MicroStation BT and Monitor Station V2 provide different monitoring routes, according to PreSonus’s model specifications.

  • PreSonus lists Bluetooth and Sub Bypass for the MicroStation BT, and multiple headphone outputs with Main/Cue selection for the Monitor Station V2.
  • According to PreSonus, USB-C on the MicroStation BT is for power only, not USB audio.

Audient

According to Audient, the Nero is designed for a set-up with multiple speaker and headphone routes.

  • Audient specifies three stereo speaker outputs, four headphone outputs and talkback for the Nero.
  • Check whether you really need these routes before choosing a more advanced model.

Radial Engineering

According to Radial Engineering, the SAT-2 is a passive controller for a stereo line-level signal.

  • Radial specifies XLR and 6.35 mm TRS inputs and XLR outputs, with mono, mute and dim controls.
  • Radial warns that speaker-level signals can damage the SAT-2; the device doesn’t convert an unbalanced signal to balanced.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can I use a passive monitor controller directly as a USB audio interface?

Not with the Mackie Big Knob Passive: Mackie lists no USB I/O or headphone outputs. The Big Knob Studio does combine monitor control with a USB recording interface. So check the full model name and the output from your current audio source.

How do I connect a simple controller while editing?

First, map out the connections on your audio source, controller and active speakers. Palmer lists one stereo input and one stereo output for the MONICON M G2. Radial Engineering specifies a line-level signal only for the SAT-2, not an amplified speaker-level signal.

Does a Bluetooth controller with USB-C also support USB audio?

Not necessarily. According to PreSonus, the USB-C connection on the MicroStation BT is for power only, so it doesn’t provide USB audio to your computer.

What warranty applies to a purchase in the Netherlands?

Consumer purchases are covered by the statutory guarantee: the product must do what you’re entitled to expect from it. According to the Rijksoverheid, the Netherlands has no fixed statutory guarantee period; if there’s a fault, contact the seller. Any manufacturer’s guarantee is separate.

Does a monitor controller sold in the Netherlands need CE marking?

The NVWA states that CE marking is compulsory for electrical products covered by the relevant rules. The rules that apply to a particular model and any power supply must be determined for each product. A brand or model name alone doesn’t confirm compliance.