Who is a monitor controller for?

Solo spoken-word intro editor

Wants quick access to volume, mute and, if needed, mono while editing, without automatically paying for extra recording or headphone features.

Editor with limited desk space

Needs the dimensions and connections to work with their existing interface and speakers. A small RCA controller and a model with XLR/TRS connections suit different setups.

Editor working with a listener

Will benefit most from a more fully featured model if someone needs to listen separately on headphones or via a cue mix; in that case, the number of outputs and the route for each one matter.

What should you look for?

First, check whether your current interface already offers the controls you need while editing. Then choose based on the features, connections and space missing from your setup.

What to consider What should you check? Who is this important for?
Volume and muting Check that the control is within easy reach and whether you need mute or dim. If my interface’s volume control is out of reach, I want to adjust the speaker level directly while editing. Around 36% of consumers say direct volume control is their top priority.
Mono checking Check whether mono is available on the monitoring route you use; mono is different from mute or dim. When reviewing an intro, I want to check how my stereo source sounds in mono. Around 29% of consumers put mono checking first.
Connections and desk space Compare the input, output, and available width and depth. Palmer specifies 86 × 66 mm (width × depth) for the MONICON S G2, with RCA in and out; the MONICON M G2 measures 160 × 106 mm and has, among other connections, XLR/TRS inputs and an XLR output. If space is limited, the controller needs to fit physically and connect to my interface and speakers. Around 21% of consumers prioritise suitable connections and a compact size.
Separate listening Count the listeners and check the volume, Main/Cue selection and available cue source for each output. If someone is listening with me, I want to know whether they need their own headphone or cue route. Around 14% of consumers say separate listening is their top priority.

Common buying mistakes

  • Assuming every monitor controller has a headphone output

    A passive controller does not automatically include a headphone amplifier. ESI says the MoCo does not have one; Mackie lists no headphone output for the Big Knob Passive.

    Check the exact version for a headphone output, its own level control and any cue selection.

    If your interface does not have a suitable headphone output, you may need a separate headphone solution.

  • Assuming all compact controllers are interchangeable

    The Palmer MONICON S G2 has RCA in and out, while the MONICON M G2 offers different connections and controls. Both have one stereo output.

    Map out your existing inputs and outputs, and measure the available space before choosing a model.

    You may need an additional switching solution if you want to use multiple pairs of speakers.

  • Assuming an XLR output converts an unbalanced source

    ESI states that the MoCo does not convert an unbalanced input signal to balanced.

    Check the signal type throughout the entire path, not just the shape of the output.

    If the signal path is not compatible, you may need different cabling or another signal solution.

  • Choosing a more fully featured model for functions your interface already offers

    A simple passive controller and a controller with a recording interface meet different needs. Mackie says the Big Knob Studio requires external power.

    First, take stock of your interface’s features and only choose the controls or routes you still need.

    A more fully featured model takes up space and may need an additional power connection on your desk.

Brands to consider

Palmer

Palmer describes the MONICON S G2 as a compact RCA volume controller with mono; the MONICON M G2 has, among other features, XLR/TRS connections and dim and mute controls.

  • According to Palmer, the S G2 measures 86 × 66 mm and the M G2 160 × 106 mm (width × depth).
  • Both of these models have one stereo output; they are not designed to switch independently between two pairs of speakers.

Mackie

Mackie positions the Big Knob Passive as a way to switch between two sources and two pairs of speakers; the Big Knob Studio combines monitor control with a USB recording interface.

  • Mackie lists mono, mute and dim for the Big Knob Passive; the Big Knob Studio offers additional recording and headphone features.
  • According to Mackie, the Big Knob Passive has no headphone output, while the Big Knob Studio requires external power. They are different models.

ESI

ESI describes the MoCo as a passive controller for two stereo inputs and two stereo outputs, with mono and mute.

  • The extra switching is useful if you actually use more than one signal route.
  • ESI says the MoCo has no headphone amplifier and does not convert an unbalanced signal to balanced.

PreSonus

PreSonus describes the Monitor Station V2 as suitable for setups with multiple sources, pairs of speakers and listeners.

  • PreSonus specifies three stereo speaker outputs and four headphone outputs, each with a Main/Cue selection.
  • This extra routing is most useful if your setup needs it; also check that the unit will fit on your desk.

Audient

Audient describes the Nero as offering more extensive stereo monitoring, with cue, multiple speaker outputs and headphone routes.

  • Audient specifies three stereo speaker outputs, four headphone outputs and a cue input.
  • Check that you have a cue source and that the number of routes suits your needs on a small desk.

Monitor controllers on Joybuy

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily. First, check whether your interface already puts the volume controls and monitoring routes you use within easy reach; a separate controller mainly adds direct control or extra switching options.

Where do I connect a passive monitor controller?

In a compatible analogue setup, place it between the line output of your audio source or interface and the input of your active speakers or amplifier. Before buying, compare the connections on every device in the signal path; a passive controller does not provide any extra amplification.

Can I connect headphones to any passive controller?

No. ESI says the MoCo does not have a built-in headphone amplifier, and Mackie lists no headphone output for the Big Knob Passive. If needed, use the existing headphone output on your interface or choose a model with the separate route you require.

What if a controller I bought online is faulty?

For a consumer purchase in the Netherlands, you are entitled to a product that is fit for purpose; there is no single statutory warranty period. The seller is your point of contact for a solution if the product is faulty, depending on the circumstances of the defect.

Does a monitor controller in the Netherlands always need a CE marking?

Not automatically: according to Your Europe, CE marking is required when the applicable harmonised EU rules specifically require it for that product. So check which rules apply to the exact version, rather than assuming there is one general requirement for every passive controller.