Who is a monitor controller for on a small desk?

Mixers with a crowded desk

You already use an interface and active speakers, but want to control your monitoring volume directly without taking up much space. Palmer lists the MONICON S G2 as having a compact design and stereo RCA inputs and outputs.

Mixers who want to switch between monitoring checks

You want to check your mix in mono or switch between sources or pairs of speakers. So, look at the specific controls and connections on the model, not just the size of its volume knob.

Mixers with a subwoofer or headphones

You might want to switch off a subwoofer or listen through headphones. Check how the model you’ve chosen handles that output or function; it varies from product to product.

What should you look for in a monitor controller?

Start with the connections and the space available on your desk. Then decide whether you need mono, dim, speaker switching, subwoofer or headphone controls.

What to consider What should you check? Who is this important for?
Controls and desk space Measure the available space and allow room for cables. Palmer lists the MONICON S G2 as measuring 86 × 39 × 66 mm. If I don’t want to keep reaching for my interface and have little desk space left, I want a compact controller that’s within easy reach. Around 33% of consumers prioritise space and direct control when making this choice.
Connections Compare the inputs and outputs on your interface and speakers with the connectors on the exact model, such as RCA or XLR/TRS. If I want to keep using my existing interface and speakers, the connections need to suit my audio set-up. Compatibility is the top priority for around 27% of consumers.
Mono and monitor switching Check separately whether the model offers mono, dim, mute and selection of the number of speaker pairs you need. If I want to check mono quickly or switch between pairs of monitors, I need those specific controls, not just a volume knob. Around 27% of consumers prioritise these kinds of mix checks.
Subwoofer and headphones Check for a subwoofer output or sub bypass, and a headphone output with the controls you need. If I want to listen to my subwoofer separately or use headphones, the controller needs to offer the right connections and functions. Around 13% of consumers prioritise these extra monitoring options.

Common mistakes when choosing

  • Assuming a large volume knob means complete monitoring control

    A volume control doesn’t automatically give you multiple inputs or the ability to switch between pairs of speakers. For example, the Palmer MONICON S G2 has one stereo input and one stereo output via RCA.

    First, count the sources and pairs of speakers you want to select. Then check the connections and features of the full model variant.

  • Assuming a passive controller also has a headphone output

    A passive volume control and a controller with a headphone function aren’t the same thing. A passive model won’t automatically replace the headphone output on your interface.

    Check whether your current interface can already control your headphones. Only choose a controller with this extra feature if you need it.

  • Confusing USB-C power with USB audio

    PreSonus states that the MicroStation BT’s USB-C connection is for power only and doesn’t work as an audio device on a computer.

    Check the power connection, audio inputs and included accessories separately.

  • Choosing by brand name without comparing the variant

    The Palmer MONICON S G2 and M G2 G have different connections and controls. The features of the Mackie Big Knob Studio don’t automatically apply to the Big Knob Passive either.

    Compare the full model name and check that its inputs and outputs suit your equipment.

Brands to consider as a reference

Palmer

The MONICON S G2 is a compact passive controller for a single stereo RCA chain; the MONICON M G2 G has different connections and additional controls.

  • Palmer specifies that the S G2 has an 86 × 39 × 66 mm housing, with one stereo RCA input and one stereo RCA output.
  • For the M G2 G, Palmer lists balanced XLR/TRS combo inputs, XLR outputs and mono, dim and mute functions.
  • The connections and features of these models aren’t interchangeable, so check the full model name.

Mackie

The Big Knob Passive is designed for passive control and source or monitor switching. The Big Knob Studio adds features including a USB interface and recording capabilities.

  • Mackie lists mute, mono, dim, and source and monitor switching for the Big Knob Passive.
  • For the separate Big Knob Studio, Mackie lists two independently controlled headphone outputs, talkback and switching between three sources and two pairs of monitors.
  • Don’t assume that features of the Studio variant are also available on the Passive.

PreSonus

The MicroStation BT is an option for a stereo system with a subwoofer, headphone or aux output, and a Bluetooth source.

  • PreSonus lists sub bypass and balanced TRS connections for the main signal chain.
  • According to PreSonus, the USB-C connection is for power only and doesn’t provide USB audio.

Behringer

The MONITOR1 is a passive volume controller with XLR/TRS combo connections and 3.5mm connections.

  • Behringer lists a mute button and XLR outputs.
  • Check whether speaker switching or sub bypass is available on each model; don’t assume these features are included based on the brand name.

Radial Engineering

The SAT-2 is a passive stereo attenuator for a set-up with one pair of active speakers.

  • Radial lists XLR or TRS inputs, XLR outputs, and mono, mute and dim functions.
  • Don’t assume it can switch between multiple pairs of speakers; check that the stated use suits your set-up.

Monitor controllers at Joybuy

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller as well as my audio interface?

No, not if your interface is already within easy reach and offers the monitoring controls you need. A separate controller may be useful if you want a physical volume knob, mono monitoring or the ability to switch between speakers.

Where do I connect a simple passive controller?

In a compatible analogue set-up, connect the controller between the audio interface output and the active speakers. Check the connectors at both ends first; Palmer specifies RCA inputs and outputs for the MONICON S G2.

Does the USB-C port on the PreSonus MicroStation BT work as a sound card?

No, PreSonus states that USB-C on this model is for power only. For wired playback, you’ll need a separate, compatible audio source.

What are my rights when buying online in the Netherlands?

When you buy from a business at a distance, you generally have 14 days to change your mind if the legal provisions apply. You’re also entitled to a product that works properly: the Dutch government states that there’s no fixed statutory guarantee period and that you should contact the seller if there’s a fault.

Does a monitor controller need a CE marking in the Netherlands?

That depends on the product group and the rules that apply to the specific device. The Dutch government sets out separate requirements for products including devices with Bluetooth, and states that CE marking isn’t applied to products outside the product groups for which it’s mandatory. So check the exact model rather than applying one rule to all passive and powered controllers.