If you already have an audio interface and a pair of active monitors, start by considering which connections and controls you’re missing. A compact passive controller may be all you need for convenient volume control. Choose a controller with separate subwoofer control, speaker switching or a headphone output if you use those routes. A subwoofer output alone won’t make the bass in a dance track reliable: room placement and tuning matter too.
Who is a monitor controller for?
Producer with one pair of monitors
You already have an audio source and active speakers, and mainly want an easy-to-reach volume control, mute or mono function—not necessarily extra recording features. According to manufacturer Steinigke Showtechnic, the Omnitronic VC-11 offers mono and mute; ESI describes similar controls on the MoCo.
Producer checking the bass
You want to assess your dance mix with and without a subwoofer, while taking room placement and tuning into account. PreSonus describes a Sub Bypass function on the MicroStation BT; Genelec and ADAM Audio explain the role of subwoofer placement and bass response.
Mixer comparing monitoring options
You actually switch between audio sources or pairs of monitors, or need a separate headphone route. Mackie, ESI and PreSonus describe models with different source, speaker and headphone connections; check which ones work with your existing equipment.
What should you look for?
Start with your existing signal path and interface. Then decide whether you mainly need convenient controls, subwoofer monitoring, switching or a separate headphone route.
| Consideration |
What to look for |
Who is this important for? |
| Controls on a small desk |
Measure the space, including room for plugs; check whether the exact model has mono and mute. |
If I want quick access to volume, mute or mono while mixing, I also need to allow for the controller and cables. Around 33% of consumers with this choice to make prioritise compact controls. |
| Bass with and without a subwoofer |
Check for both a subwoofer output and a separate bypass, and make sure the connections are compatible with your subwoofer. |
It matters to me that I can assess the same mix with and without the sub connected, without muting the stereo speakers. Around 27% of consumers put bass monitoring first. |
| Switching between sources or pairs of monitors |
Count your stereo sources and monitor pairs separately, and check that the model offers both types of switching you need. |
If I regularly listen to the same mix through a second source or pair of monitors, I want to compare those routes directly. Around 27% of this group prioritise comparing monitoring options. |
| Separate headphone route |
Check whether the model has a proper headphone output with the volume control you want; an aux output isn’t necessarily the same thing. |
I mainly need a separate headphone route if my existing interface doesn’t offer that listening option. Around 13% of consumers name this as their top priority. |
Passive controller for one stereo pair
Choose this when: your interface already handles the signal and, if needed, your headphones, and you mainly want an easy-to-reach volume knob.
Trade-off: a passive controller doesn’t amplify the signal; mono, mute or a headphone amplifier may not be included.
Passive controller for comparing setups
Choose this when: you actually want to compare two stereo sources or two pairs of monitors. Mackie describes these features for the Big Knob Passive.
Trade-off: extra routes need more connections and cables; according to Mackie, the Big Knob Passive has no headphone output.
Controller with switchable subwoofer
Choose this when: you use a compatible subwoofer and want to listen to the bass without it too. PreSonus lists Sub Bypass on the MicroStation BT.
Trade-off: PreSonus says the MicroStation BT’s USB-C connection is for power only; placement and tuning still matter when assessing your mix.
Advanced controller or combined interface
Choose this when: you need multiple pairs of monitors, separate headphone routes or interface functions as well.
Trade-off: extra connections and controls take up space. Check the dimensions and allow room for cables before choosing a model for a small desk.
Common buying mistakes
-
Assuming a passive controller is a headphone amplifier
A passive speaker controller doesn’t automatically drive headphones. ESI confirms that the MoCo has no built-in headphone amplifier.
Check whether the exact model has a headphone output and whether its controls suit the listening route you want.
If your interface doesn’t provide that route, you may need additional equipment to listen through headphones.
-
Confusing a subwoofer output with bass correction
A switchable subwoofer route lets you compare your mix, but it doesn’t automatically correct the effect of room resonances on what you hear.
Use bypass to compare the sound with and without the sub, and assess its placement and tuning separately.
Allow time to assess the subwoofer’s placement and tuning in your room.
-
Counting connections and nothing else
The number of connections alone doesn’t tell you whether the signal type is right. ESI says the MoCo doesn’t convert an unbalanced input signal to a balanced one. With the Audient NERO, also allow for the space taken up by cables behind the unit.
Map out your entire signal path before buying and measure the available space, including behind the controller.
If the connections, signal type or available space aren’t suitable, you may need different cables or another solution.
Brands to compare
Omnitronic
The VC-11 is a passive desktop controller for an analogue source and active speakers or an amplifier.
- According to manufacturer Steinigke Showtechnic, the VC-11 has mono and mute functions and measures 16 × 10,8 × 6,3 cm.
- As a passive device, the VC-11 can attenuate the signal but can’t amplify it.
Mackie
The Big Knob Passive controls two sources and two pairs of monitors; the Big Knob Studio combines monitor control with a USB audio interface.
- Mackie lists mono, mute and dim functions for the Big Knob Passive. The Big Knob Studio also has headphone outputs.
- The Studio’s headphone outputs aren’t a feature you can assume the Passive has. The maximum USB sample rates listed for the Big Knob Studio vary across the product information consulted, so check the exact version.
PreSonus
The MicroStation BT is designed for a compact stereo-plus-subwoofer setup; the Monitor Station V2 offers more extensive monitoring options.
- PreSonus lists Sub Bypass and a headphone/aux output for the MicroStation BT. The Monitor Station V2 has separate headphone outputs, each with its own level control and Main/Cue selection.
- According to PreSonus, the MicroStation BT’s USB-C connection is for power only. The Monitor Station V2’s wider choice of speakers and headphones may not be necessary in every small setup.
ESI
The passive MoCo is designed for two stereo sources and two stereo outputs.
- ESI specifies mono and mute functions, plus a choice of sources and outputs.
- According to ESI, the MoCo has no headphone amplifier and doesn’t convert an unbalanced signal to a balanced one.
Audient
The NERO is a more fully featured monitor controller for anyone who needs more connections.
- Audient specifies, among other features, digital inputs and headphone outputs.
- Audient lists the unit’s dimensions as 255 × 75 × 155 mm. Check that it fits on your desk, with enough room for the cables too.
Related products
Related products coming soon.
Frequently asked questions
Do I need a monitor controller as well as my audio interface?
Not necessarily. If your interface already offers the volume and headphone controls you need, a separate controller may add little. A controller can be useful if you want to switch physically between sources or pairs of monitors, or need a particular subwoofer route.
Can I use the MicroStation BT as an audio interface via USB-C?
No. According to PreSonus, the MicroStation BT’s USB-C connection is for power only. Connect computer audio through a suitable audio input.
Does Sub Bypass make the bass in my dance mix reliable straight away?
No. Sub Bypass lets you switch off the subwoofer, but its placement, room resonances and tuning with the main speakers still affect what you hear. Genelec explains how placement can affect the frequency response.
What can I expect in the Netherlands if a product is faulty?
For a consumer purchase, the product must be of satisfactory quality, and the seller is responsible for providing an appropriate remedy if something is wrong. According to the Dutch government, there is no set statutory guarantee period for all products in the Netherlands. Online purchases from a business generally also come with a 14-day cooling-off period; check the applicable terms and exceptions.
Which product rules apply to an electrical or Bluetooth model?
CE marking is required for products covered by EU rules that make it mandatory; the rules that apply depend on the product. The EU Radio Equipment Directive is also relevant to equipment with radio functions such as Bluetooth. The applicable requirements must be checked for the specific version; a CE logo is not an audio quality test.