Mixer with one pair of monitors
You mostly mix on your own and want to control the level, mute and mono functions without reaching for your interface or software. First, check which controls you already have.
If your audio interface is within easy reach and already provides all the listening routes you need, you can keep using it. For direct volume control and mono operation, a compact passive controller may be enough. Choose extra speaker outputs or separate headphone and cue routes only if you need them, and check that your cables have enough slack at both heights of your sit-stand desk.
You mostly mix on your own and want to control the level, mute and mono functions without reaching for your interface or software. First, check which controls you already have.
You use two physical pairs of monitors and want to switch between them to assess your mix. Count speaker pairs, not computer screens.
You also record, and someone needs a separately adjustable headphone route. Check where the cue signal comes from.
Choose this if: the volume control is within easy reach and your interface already offers the speaker and headphone routes you need.
Bear in mind: the interface’s position and features; physical mono, dim or mute buttons are not a given.
Choose this if: you mainly want a volume knob and direct mute and mono controls for one stereo listening route.
Bear in mind: the connections on the exact model; a passive volume controller is no substitute for a separate headphone or cue amplifier.
Choose this if: you actually use two physical pairs; according to Mackie, the Mackie Big Knob Passive has two source and two monitor routes.
Bear in mind: according to Mackie’s model comparison, the Big Knob Passive has no headphone outputs; adjust the levels of the monitor pairs separately if your setup requires it.
Choose this if: a musician needs their own listening route during recording; the PreSonus Monitor Station V2 offers Main/Cue selection and level control for each headphone output.
Bear in mind: your recording setup must provide the cue signal you need, and extra routes require suitable connections and planning.
| Consideration | What to look for when buying | Who cares about this? |
|---|---|---|
| Direct control | Check that your interface is within easy reach and see which physical volume, mute and dim controls the exact model offers. | If I mainly mix on my own, I want to control the level and mute directly without reaching for the interface or software. Around 40% of consumers prioritise direct control. |
| Mono and speaker switching | Count the stereo sources and physical pairs of monitors you use; check for mono separately from the number of outputs. | If I want to compare my mix on two physical pairs of monitors, I need a proper switch between them; a second screen doesn’t count as another pair. Around 30% of consumers prioritise checking their mix or switching between pairs of speakers. |
| Listening during recording | Check the number of headphone outputs, the level control for each output, and whether Main/Cue selection and a suitable cue source are available. | If a musician needs their own listening route during my recording session, I want to know whether that route can be adjusted separately. Around 20% of consumers prioritise a separate mix for musicians. |
| Cables and desk space | Compare the connections and dimensions; check cable slack at the desk’s highest and lowest settings. | If my equipment is on and next to the adjustable desktop, I want the connections to move with it without being pulled tight. Around 10% of consumers are primarily concerned with desk fit and connections. |
Switching between monitor outputs is for separate physical pairs of speakers, not different screens.
First count the connected speaker pairs and sources, then choose the number of routes you need.
Unused features can make your setup unnecessarily complicated; extra routes may also require additional cabling.
According to Mackie’s model comparison, the Mackie Big Knob Passive has no headphone outputs. And a headphone output does not automatically mean there’s a separate cue mix.
Check the headphone, recording and cue functions separately on the exact model, and make sure your recording setup provides the signal you want.
You may need additional equipment or cabling for musician monitoring.
When you adjust the desktop, the distance to equipment in a fixed position changes. This can pull cables tight.
Plan the cable route with the desk at its highest setting, then check the desktop’s full range of movement.
Cables that are too short may need replacing or rerouting.
ACM ConsuWijzer distinguishes between an optional commercial warranty and your statutory rights when a product does not meet what you were entitled to expect.
Keep your purchase details and contact the seller first if something is wrong.
The Big Knob Passive is worth considering if you want to switch between physical sources and speakers without an integrated USB audio interface. Mackie positions the Studio and Studio+ models as more feature-rich options.
The MONICON M G2 is a compact passive option for one stereo listening route at your desk.
The Monitor Station V2 is designed for setups that need multiple pairs of speakers and separate headphone or cue routes.
The Baby RAM is a passive option with two stereo input and output pairs, for anyone who wants these connections and stepped volume control.
The Nero is a more feature-rich desktop model for setups with multiple speaker, subwoofer and headphone routes.
First compare the connections on your interface, the exact controller model and your speakers. When routing cables between the moving desktop and fixed equipment, leave enough slack for the full height range and check both end positions.
Not just because it has a passive design. According to Mackie’s model comparison, the Mackie Big Knob Passive has no headphone outputs, while the PreSonus Monitor Station V2 has separate headphone outputs and Main/Cue selection. Also check that your recording setup provides a suitable cue source.
No. The Netherlands Enterprise Agency describes CE as a conformity mark, not a quality mark or safety guarantee. Whether CE marking is mandatory for a particular version depends on the applicable product rules; don’t infer a model’s performance or conformity from a general category description alone.
For this model, Mackie recommends cleaning with a dry cloth only and advises against using it near water. For other models, follow the relevant manual.