For a single pair of speakers, a compact controller with an easy-to-reach volume knob, mute and mono controls may be enough. Choose extra switching options if you genuinely switch between sources or pairs of speakers while editing. Only consider cue, talkback or multiple headphone outputs if you also record someone, and check that the connections are compatible and your existing audio interface doesn’t already offer the features you need.
Who would benefit from a monitor controller at a sit-stand desk?
Demo maker with one pair of speakers
If your interface is hard to reach when you’re standing, a physical volume knob with mute and mono controls may be more practical. Bax Music describes easy access to the volume control as one possible reason to use a monitor controller; Palmer lists mono, dim and mute for the MONICON M G2.
Maker who compares listening setups
If you genuinely switch between sources or pairs of speakers while evaluating a demo, it’s worth choosing controls that suit your setup. Mackie specifies that the Big Knob Passive can switch between two sources and two pairs of monitors.
Songwriter who also records someone
If a singer or instrumentalist needs to listen at the same time as you, look for a separate headphone route and controls for it. PreSonus describes the Monitor Station V2 as having headphone outputs with Main/Cue selection and talkback.
What should you look for in a monitor controller for your demo?
Compact controls for one pair of speakers
Choose this if: your interface handles recording and you mainly want an easy-to-reach volume knob with quick controls. Palmer specifies one stereo input and output for the MONICON M G2, plus mono, dim and mute.
Bear in mind: this connection setup doesn’t let you switch between multiple pairs of speakers or provide a separate cue route.
Switching between sources and pairs of speakers
Choose this if: you genuinely compare multiple connected sources or pairs of speakers while editing. Mackie specifies that the Big Knob Passive supports two sources and two pairs of monitors.
Bear in mind: according to Mackie, the Big Knob Passive isn’t a recording interface, so you’ll need to manage your recording chain separately.
Letting a performer listen in
Choose this if: someone needs their own headphone route while you’re recording. According to PreSonus, the Monitor Station V2 has four headphone outputs with Main/Cue selection and separate level controls, plus talkback.
Bear in mind: extra routes and controls may be unnecessary if you only use one pair of speakers to edit your own demo.
Adding a phone source or subwoofer
Choose this if: you want to play audio from a phone as well as your wired interface source, or connect a subwoofer. PreSonus specifies Bluetooth, a sub output and balanced TRS inputs for the MicroStation BT.
Bear in mind: according to PreSonus, this model’s USB-C connection is for power only and doesn’t carry computer audio.
| What to consider |
What should you check? |
Who is this important for? |
| Controls within easy reach |
Check that the knob and cables remain within reach whether you’re sitting or standing, and see which features your interface already offers. |
If I want to adjust the volume or use mute or mono quickly when changing desk height, I want to be able to do so without having to search for the controls. Around 39% of consumers put easy access to controls first. |
| Switching between listening setups |
Count the sources and pairs of speakers you’ll actually connect; check the connections and whether you can set levels independently. |
When I compare demos using different connected sources or pairs of speakers, I want to be able to switch between them. Around 23% of consumers say switching is their main need. |
| Headphones and talkback |
Check the number of outputs, separate level controls, Main/Cue selection and talkback on the exact model. |
If I’m recording someone, I want them to have their own suitable listening route. Around 23% of consumers say monitoring for a performer is their top priority. |
| Phone source and subwoofer |
Check Bluetooth and wired inputs, the sub output, the power supply and whether USB audio is available. |
When I want to use my phone as a reference or connect a subwoofer, I want to know which connections are intended for that purpose. Around 15% of consumers choose phone or subwoofer connectivity as their main reason. |
Common mistakes when choosing a monitor controller
-
Mistaking a passive controller for a recording interface
The Mackie Big Knob Passive and Big Knob Studio are different models: Mackie describes recording features for the Studio, not the Passive. If you think of recording and speaker control as a single function, you could leave out a part of your signal chain.
Decide separately how you’ll record and control your speakers, and check the full model name.
If you don’t already have a suitable recording interface, you may need a separate device.
-
Choosing more headphone routes than you need
A model with several independently controlled headphone outputs is designed for a different setup from a compact controller for one stereo route.
Before choosing extra outputs, count how many people need their own listening route at the same time.
Extra controls and connections take up desk space you may not need for a simple demo setup.
-
Confusing Bluetooth or USB-C with USB audio
The PreSonus MicroStation BT can play Bluetooth audio, but according to PreSonus its USB-C connection is for power only and doesn’t appear as an audio device on a computer.
Include your wired recording and editing route in your connection plan, and check which connection actually carries the computer’s audio signal.
You may also need a suitable interface or compatible cables for the wired route.
-
Checking only the dimensions for a sit-stand desk
The controller and cables need to remain usable as the desk changes height; the best cable route will depend on where you place your equipment.
Plan the route between your interface, controller and speakers for both seated and standing positions.
You may need a different cable route or extra cable length to keep your setup usable at both heights.
Brands to consider
Palmer
The MONICON M G2 offers compact controls for one stereo source and one pair of speakers; the L G2 has more inputs and outputs.
- According to Palmer, the MONICON M G2 has mono, dim and mute, as well as one stereo input and output.
- The M G2 doesn’t have the two stereo outputs, mono output or separate headphone control that Palmer specifies for the L G2.
Mackie
The Big Knob Passive is designed for analogue switching between sources and pairs of monitors; the Big Knob Studio combines monitor control with a USB recording interface.
- Mackie specifies two sources, two pairs of monitors, and mono, mute and dim functions for the Big Knob Passive.
- According to Mackie, the Passive has no headphone or USB connection; the Studio’s features belong to that separate model.
PreSonus
The MicroStation BT is designed for a compact setup with a phone source and subwoofer; the Monitor Station V2 offers more listening and headphone routes.
- PreSonus specifies Bluetooth and a sub output for the MicroStation BT, and independently controlled headphone outputs with Main/Cue selection for the Monitor Station V2.
- According to PreSonus, the MicroStation BT’s USB-C connection is for power only; don’t assume the Monitor Station V2’s features are available on this model.
Behringer
The STUDIO M is a passive option for two stereo sources and two speaker outputs.
- Behringer lists mono, mute and dim; the stated dim reduction is 20 dB.
- Check the connections on the specific unit you’re buying before reusing your existing cables.
Audient
The Nero is a desktop model for multiple speakers, a subwoofer, and headphone and cue routes.
- Audient specifies three stereo speaker outputs, an assignable sub output, four headphone outputs and talkback.
- Those features differ from a controller for one pair of speakers, and don’t in themselves prove it will suit your room or workflow better.
Products on Joybuy
Related products coming soon.
Frequently asked questions about monitor controllers
Do I need a monitor controller if my audio interface already has a volume knob?
Not necessarily. First, check which controls on your interface are already within easy reach. A separate controller is most useful if the volume knob, mute or switching controls are hard to reach when you’re sitting or standing.
How do I connect a simple passive controller?
A compatible model sits in the signal path between your audio interface’s output and your speakers’ inputs. Before buying, check the number of channels and the connectors at both ends; Palmer specifies one stereo input and one stereo output for the MONICON M G2.
Can I use the USB-C port on the PreSonus MicroStation BT for computer audio?
No. According to PreSonus, that connection is for power only. For the audio signal, use a suitable audio output connected to the wired input.
What consumer rights apply to an online purchase in the Netherlands?
For an eligible online consumer purchase, you have a statutory 14-day cooling-off period, usually counted from the day after delivery, although exceptions apply. Your statutory rights relating to goods that don’t conform to the contract are separate from any commercial guarantee. Check that you’re buying as a consumer and which terms apply to your order; consumer rules don’t apply in the same way to business purchases.