Who is this for?

Office editor who uses headphones

You edit while colleagues are working and want to listen to your tracks through headphones. Make sure the controller has a dedicated headphone output, or carry on using the output on your audio interface.

Editor with an existing audio interface

Your headphones already work through your interface, but you want to turn your speakers down, mute them or check your mix in mono directly. First, see what controls your interface already offers.

Editor with multiple listening routes

You compare sources or pairs of speakers, or want someone else to listen in. Check how many separate outputs and level controls your setup needs.

What should you look for?

First, check how you’ll keep listening through headphones and how you’ll mute the speakers. Then decide whether you need extra connections or listening routes.

What to consider What to look for when buying Who is this important for?
Quiet listening Check whether the device has a headphone output and how the speaker mute works. If I’m editing while colleagues are working, I want to listen through headphones and mute the speakers separately. Around 36% of consumers put quiet listening first.
Direct volume control Compare how easy it is to reach the volume control on the controller and your interface; also check for mute and dim functions. If I play clips often, I want to adjust the volume quickly from my desk. Around 29% of consumers prioritise direct volume control.
Mono and comparison Check whether mono is available and how many pairs of speakers you’ll actually connect. If I want to check my mix in mono or through a second pair of speakers, I need those switching options. For around 21% of consumers, mono and monitor comparisons are the main priority.
Extra routes and recording Count your sources, monitor pairs and independently controlled headphones; decide whether you’ll keep your current interface. If I want someone else to listen in or I also want to record, I need enough independent routes. Around 14% of consumers prioritise these extra connections or recording features.

Common buying mistakes

  • Mistaking a small line output for a headphone output

    According to ESI, you can’t connect headphones directly to the passive ESI MoCo: it doesn’t have a built-in headphone amplifier.

    Look for an output explicitly labelled as a headphone output, or keep using the headphone output on your audio interface.

    If you want to listen directly through the controller, you may need a separate headphone amplifier or a different controller.

  • Expecting a controller to make the office quiet

    Mute and dim let you control playback, but they won’t stop your speakers disturbing colleagues while you’re using them.

    Use headphones during shared working hours and follow your workplace’s arrangements for using speakers.

  • Buying more features than you’ll use

    Your existing interface may already offer the recording and headphone features you need; extra inputs and listening routes aren’t automatically useful when editing existing tracks.

    Map out your current and desired connections, then choose only the routes you actually need.

    More connections can also mean more setup work.

Brands to consider

Mackie

The Big Knob Passive is designed for passive switching between sources and pairs of speakers; the Big Knob Studio combines monitor control with a USB audio interface.

  • Mackie says both models have mono, mute and dim functions; the Big Knob Studio also has two headphone outputs.
  • The Big Knob Passive has no headphone output. Choose extra recording and headphone features only if they’ll be useful in your setup.

PreSonus

The MicroStation BT is designed for a compact speaker and subwoofer setup; the Monitor Station V2 offers more listening routes and headphone outputs.

  • According to PreSonus, the MicroStation BT has a headphone/aux output, speaker mute and sub bypass. The Monitor Station V2 has four independently controlled headphone outputs.
  • Check how mute works with your connections on the MicroStation BT. The extra routes on the Monitor Station V2 are only relevant if you need them.

Palmer

The MONICON M G2 is a passive controller for one stereo source and one stereo output; the MONICON L G2 has a separate headphone output.

  • According to Palmer, the M G2 has mono, dim and mute functions. On the L G2, the built-in power supply also powers the headphone amplifier.
  • The M G2 specifications don’t mention a headphone amplifier. Consider the more fully featured L G2 separately if you need a dedicated headphone route.

ESI

The MoCo is a passive option for source selection and two speaker outputs when your headphones are already connected elsewhere.

  • ESI lists mono and a mute function for the playback signal.
  • According to ESI, the MoCo has no built-in headphone amplifier and you can’t connect headphones to it. The 3.5mm line socket isn’t a substitute.

Audient

The Nero is designed for multiple sources, pairs of speakers and headphone routes.

  • Audient specifies four headphone outputs, three stereo speaker outputs, and dim, cut and mono functions.
  • These extra routes are mainly useful if you need them; feature specifications aren’t an independent performance test.

SPL

The 2Control combines multiple stereo and headphone routes with adjustable crossfeed.

  • According to SPL, the 2Control offers two stereo sources, two pairs of speakers and two headphone outputs.
  • SPL describes crossfeed as a way to help mixes made on headphones translate to speakers; this isn’t an independently proven benefit for this editing task.

Joybuy products

Related products coming soon.

Frequently asked questions

Can you plug your headphones into any monitor controller with a small jack socket?

No. Check that the socket is specifically intended as a headphone output. ESI says the passive MoCo has no headphone amplifier and isn’t suitable for connecting headphones directly.

How do you connect a monitor controller if you already have an audio interface?

Connect the line outputs on your interface to the corresponding inputs on the controller, then connect the controller’s outputs to your speakers. Keep using your existing headphone route if the model you choose doesn’t have that function, and check the connectors and controls in the model’s manual.

Can you simply use speakers in a shared office?

Don’t assume that having a volume control means you have permission to use speakers; follow your workplace’s arrangements. Arboportaal notes that disruptive noise at work can also pose a risk and that workplace risks need attention.

What are your rights when buying online in the Netherlands?

For distance purchases, you generally have a 14-day cooling-off period in many cases, according to the Dutch government. Products must also be of satisfactory quality; the Dutch government states that the Netherlands has no fixed statutory warranty period and that you can contact the seller if a product is faulty. The exact terms depend on the specific purchase.