Editor working quietly on headphones
You edit sessions alongside colleagues and want to know whether you can plug your headphones directly into the controller, or whether it’s better to use your existing audio interface.
If you mainly listen through headphones, check that the controller itself has a suitable headphone output and the monitoring routes you need; a passive speaker controller will not necessarily offer these. For example, ESI confirms that the passive MoCo does not have a built-in headphone amplifier. If you also use monitors or have someone else listening in, work out how many sources, speaker pairs and separate cue routes you need before choosing extra features.
You edit sessions alongside colleagues and want to know whether you can plug your headphones directly into the controller, or whether it’s better to use your existing audio interface.
As well as using headphones, you listen through speakers and want to be able to mute, turn them down or switch between listening sources quickly while editing.
You review the session with a musician or colleague and want to work out whether you need two headphones, separate levels, cue routing or talkback.
Best suited to: situations where your headphones are already connected through your audio interface and you mainly want to control your speaker levels.
Trade-off: features such as mute or dim vary by model. Don’t assume it also has a headphone output or cue route.
Best suited to: situations where you or a colleague want to listen through the controller. Mackie specifies two headphone outputs with separate level controls for the Big Knob Studio.
Trade-off: two sockets alone don’t tell you whether listeners can choose their own cue mix.
Best suited to: situations where a musician or colleague needs a separate listening route, or you want to talk during the session. PreSonus specifies a Main/Cue selection for each headphone output and talkback on the Monitor Station V2.
Trade-off: check that the available routing suits the session mixes you need; extra sockets are less useful if you’re the only one listening.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Quiet listening | Check whether you can plug your headphones into the controller and adjust the level there. | When I’m working alongside colleagues, I want to listen to my session through headphones. Around 33% of consumers prioritise being able to listen quietly. |
| Separate listening routes | Check the source selection and level control for each output, and make sure the cue and talkback features suit the session. | When a musician or colleague needs to listen in, I want to know which mix they’ll hear. Around 27% of consumers prioritise separate listening routes and communication. |
| Mute and dim | Check whether the model has mute and dim, and which output these features affect. | I want to mute my speakers quickly or turn them down temporarily while we talk. Around 20% of consumers prioritise immediate level control. |
| Connecting sources and monitors | Count the stereo inputs and speaker pairs you need; check the connections and routing on the exact model. | With several sources or monitor setups, I want to switch easily between the connections I use. Around 20% of consumers start by looking at the available connections. |
A speaker volume control doesn’t automatically mean there’s a headphone amplifier. ESI confirms that the passive MoCo doesn’t have one.
Check the specifications for the exact model and see what headphone facilities your audio interface already offers.
The number of outputs doesn’t automatically tell you which source each listener can select.
Check the routing and source selection for each output. PreSonus specifies a Main/Cue selection and separate level control for each headphone output on the Monitor Station V2.
The statutory cooling-off period for consumers does not automatically apply when an office organisation makes a business purchase.
Before ordering, check who is legally making the purchase and which terms and conditions apply.
The SAT-2 is designed to control the volume of a single pair of active speakers.
The Big Knob Passive is designed for two sources and two monitor pairs; the Big Knob Studio combines an interface with talkback and headphone outputs.
The Monitor Station V2 is designed for setups with several speaker pairs and listeners.
The Nero is designed for multiple sources, speaker outputs and headphone listeners.
The 2Control is designed for two stereo sources, two speaker sets and two headphones.
No, check each model. ESI confirms that the passive MoCo doesn’t have a built-in headphone amplifier. If your existing audio interface is suitable, you can leave your headphones plugged into it.
No, the number of outputs doesn’t prove that listeners can choose different sources or mixes. PreSonus specifies a Main/Cue selection and separate level control for each headphone output on the Monitor Station V2. Check the routing you need for each model.
First, map out the signal path from your audio interface to the controller and then to the active speakers. Radial describes this connection for the SAT-2. For another model, check the input types, outputs and source selection individually, then test mute and dim on the intended output.
Online consumer purchases generally come with a statutory 14-day cooling-off period from delivery, subject to exceptions, according to ACM ConsuWijzer. According to Ondernemersplein, this cooling-off period does not automatically apply when an office organisation makes a business purchase. If a product develops a fault too soon under normal use, the seller must resolve the issue, according to ACM ConsuWijzer.
No, Dutch noise regulations don’t prescribe a fixed setting for a controller’s volume knob. Arboportaal outlines employers’ obligations in terms of daily noise exposure: above 80 dB(A), the employer must provide hearing protection; above 85 dB(A), employees must wear it.