Who might need a monitor controller?

Mixer in a shared office

You’re working on a folk demo and want to listen through speakers from time to time. Easy-to-reach volume, mute and dim controls may be more important than extensive routing options.

Mixer who mainly works on headphones

You usually listen privately and want to switch easily between headphones and speakers. Check whether the controller itself has a headphone output, or whether your interface already provides one.

Musician and mixer in one setup

You also record vocals or acoustic instruments, so you may need a separate cue mix or talkback. Check that the connections and features suit the way you work together.

What should you look for?

First, decide which controls you need to reach quickly during a short speaker check. Then check whether your headphone and recording setup requires connections that a basic model may not offer.

What to consider What should you look for? Who is this most relevant to?
Quick speaker checks Check that the volume, mute and dim controls are physical and within easy reach. I want to manage speaker levels quickly for short checks in a shared office. Around 36% of consumers say quick speaker control is their main concern when buying.
Private listening Check whether the controller has a headphone output and its own volume control. Also see whether your interface already provides these. If I usually mix on headphones, I want to listen without using the speakers. Around 29% of consumers give private listening top priority.
Connections Compare the inputs and outputs on the exact controller model with those on your interface and speakers. Don’t connect a line-level device to an amplified speaker output. I want to add the controller to my existing audio chain without using an unsuitable connection. Around 21% of consumers prioritise compatibility with their existing setup.
Extra mixing or recording features Check whether you need mono, a separate cue route, talkback or a built-in recording interface, and whether those features are included in the version you’re considering. When recording with a musician, I may want a separate monitor mix or extra controls. Around 14% of consumers say extra mixing or recording features are their main concern when buying.

Pitfalls to avoid

  • Assuming a passive volume controller is a headphone amplifier

    A passive controller doesn’t automatically provide a powered headphone output. You may still need to use your interface’s output for private listening.

    Check whether your interface already has a suitable headphone output. If not, look specifically for a controller with a headphone output.

  • Buying an extra USB interface when your existing one does the job

    A controller with built-in recording features may duplicate functions you already have. The Mackie Big Knob Studio and Big Knob Passive offer different features.

    Before buying, decide whether you only need monitor controls or also need a recording interface and microphone preamps. Check the exact version and how it connects to your computer.

  • Connecting a line-level device to an amplified speaker output

    Radial warns that an amplified speaker signal can damage the SAT-2’s electronics.

    Before connecting, compare the output from your interface or amplifier with the maximum input level of the exact controller model.

Relevant brands to consider

Mackie

The Big Knob Passive focuses on straightforward physical controls, while the Big Knob Studio combines monitor control with a USB recording interface.

  • Mackie’s product specifications list mute, mono and dim on the Passive. The Studio adds features including headphone outputs and microphone preamps.
  • The models aren’t interchangeable: their recording and headphone features differ in particular. Check which features suit your setup.

PreSonus

The Monitor Station V2 is designed for setups that benefit from multiple listening routes or a musician’s cue mix.

  • PreSonus lists headphone outputs, a cue section and talkback, as well as mute, mono and dim.
  • Its more extensive controls may be unnecessary if you only need one straightforward speaker route.

Audient

The Nero is designed for flexible routing to multiple headphones and speakers.

  • Audient lists four headphone outputs with flexible routing, along with multiple speaker outputs.
  • These features are most useful if your setup will actually make use of them.

Radial

The SAT-2 is a passive controller for adjusting a line-level stereo signal.

  • Radial specifies a passive signal path with mono and level controls.
  • According to Radial, the SAT-2 is intended for line-level signals only, not amplified speaker signals.

Palmer

The MONICON XL is designed for a more extensive setup with multiple sources, speaker pairs and a headphone cue.

  • Palmer specifies two headphone outputs, three speaker outputs and a separate cue selection.
  • If you’re using one interface at a desk, it’s worth first working out which of these routes you need.

Monitor controllers at Joybuy

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily. If your interface already provides the headphone and volume controls you need, only add a controller for features you’re missing, such as physical mute, dim or switching between speaker pairs.

What should I connect a passive SAT-2 to?

According to Radial, use the SAT-2 only with line-level signals, for example between a suitable interface output and the rest of your monitor chain. Don’t connect it to an amplified speaker output: Radial warns that this could damage the electronics.

What should I check during everyday use?

Before listening, check which source and speaker output are selected, and set the level carefully. If your controller has a separate cue route, also check which mix is going to the musician’s headphones. The available switching options vary by model.

Does the manufacturer’s warranty mean my rights end when it expires?

No. According to the Government of the Netherlands, there is no fixed statutory warranty period for all products in the Netherlands. A manufacturer’s warranty is in addition to your right to a product that is fit for purpose. If there’s a problem, contact the seller.

Is a CE mark an independent quality mark for monitor controllers?

No. The European Commission describes the CE mark as a declaration by the manufacturer that the product meets the applicable EU requirements, not as a certificate issued by a central EU body. The requirements and marking that apply depend on the specific product.