Who can benefit from a monitor controller?

Mixer with one pair of monitors

If you already have an audio interface, a separate controller can make it easier to adjust levels quickly, mute the speakers and check your jazz mix in mono. Bax Music’s buying guide lists volume control and mono or stereo operation as examples of features on a passive controller.

Listener who needs a quiet option

If you share a desk or room, a headphone output can let you listen without using the speakers. Check that the specific model actually has a headphone output.

Mixer with multiple monitoring routes

If you want to compare sources or pairs of speakers, check that the controller supports those routes. Separate headphone outputs, cue mix and talkback may be useful during a recording session; Audient lists these features for the NERO.

Which features should you prioritise?

Choose according to the monitoring route you actually need: one pair of monitors calls for something different from headphone, source or cue routing.

Simple control for one pair of monitors

Choose this if: you mainly want an easy-to-reach volume knob and direct mono, dim and mute controls. Palmer lists one stereo source and one stereo output for the MONICON M G2.

Keep in mind: this model doesn’t offer a second stereo output for an additional pair of monitors; also check that the connections match your equipment.

Switching between sources or pairs of monitors

Choose this if: you want to connect two stereo sources or two pairs of monitors. Mackie lists these switching options for the Big Knob Passive; Heritage Audio specifies two pairs of stereo inputs and outputs for the Baby RAM.

Keep in mind: these models don’t automatically include a headphone output or cue mix; also check that the connections work with your cables.

Headphones and speakers at one desk

Choose this if: you want to switch between listening on speakers and headphones. PreSonus lists a headphone/aux output and Main Mute on the MicroStation BT.

Keep in mind: check how mute and the headphone output work in your set-up; Bluetooth is a playback option and doesn’t, by itself, tell you anything about the wired routing.

Multiple routes during a recording session

Choose this if: you want to give musicians a separate cue mix and headphone outputs. Audient lists a cue mix input, talkback and four headphone outputs for the NERO.

Keep in mind: if all you need is a volume knob and one pair of monitors, the extra routing options and desk space required may be unnecessary.

What to consider What should you check? Who is this important for?
Immediate mix control Check whether the model offers volume, mono, dim and mute controls, and whether the inputs and outputs are compatible. If I want to adjust the level quickly while mixing and check the mix in mono, I prioritise these controls. Around 36% of consumers put immediate level and mix control at the top of their list.
Quiet listening Look for a proper headphone output and check the connection and mute function. If I share a desk and don’t want to use the speakers, I need a headphone output. Around 29% of consumers give quiet listening top priority.
Switching between sources or pairs of monitors Count stereo sources and pairs of monitors separately, then compare the connections. If I want to compare different sources or pairs of speakers, I need to be able to connect and switch between them separately. Around 21% of consumers put this switching option first.
Cue mix and talkback Check whether you need a separate mix for musicians and how many headphone outputs are available. If I want to give a musician their own headphone mix during a recording, cue mix and talkback matter more than just having a volume knob. Around 14% of consumers give these session features top priority.

Common pitfalls

  • Mistaking a passive volume control for a headphone amplifier

    A passive controller may offer volume and switching controls, but it won’t necessarily have a headphone output. Mackie doesn’t list a headphone output for the Big Knob Passive.

    Check the exact model for a headphone output if you want to listen without using your speakers.

  • Confusing inputs, outputs and connector types

    Two inputs don’t mean a controller can drive two pairs of monitors. The Palmer MONICON M G2 has one stereo output according to its product specifications; the Baby RAM has two pairs of stereo outputs via TRS.

    Map out the signal path from your interface to the controller and speakers, then check which type of cable you need for each connection.

  • Confusing features across models in the same range

    Mackie distinguishes the Big Knob Passive from the Big Knob Studio, which also has interface and recording features. These features aren’t automatically included with the Passive model.

    Compare the full model name and the features of the version you’re considering.

Brands to consider

Palmer

The MONICON M G2 is designed for one stereo source and one stereo output on a desk.

  • Palmer lists balanced XLR/TRS combo and 3.5mm inputs, XLR and 3.5mm outputs, and mono, dim and mute functions.
  • Its single stereo output isn’t designed for switching between two pairs of monitors. Manufacturer claims about sound quality aren’t an independent listening test.

Mackie

The Big Knob Passive is designed for switching between sources and pairs of monitors; the Big Knob Studio also has interface and recording features.

  • Mackie lists switching between two sources and two pairs of monitors, with mono, mute and dim, for the Big Knob Passive.
  • The Big Knob Passive doesn’t have a headphone output. Don’t assume that features of the Big Knob Studio are included in the Passive model.

Heritage Audio

The Baby RAM is a passive controller for two stereo sources and two stereo outputs, provided its TRS connections suit your set-up.

  • Heritage Audio lists a 24-step volume control and mono, dim and mute buttons.
  • The listed features don’t include a separate headphone output. Manufacturer claims about transparency or stereo imaging aren’t an independent comparison.

PreSonus

The MicroStation BT is designed for a set-up with one pair of active speakers and an additional headphone output.

  • PreSonus lists balanced TRS inputs and outputs, a headphone/aux output, Bluetooth and a subwoofer output with bypass.
  • Bluetooth is a playback option. Check the wired connection and routing you need for mixing separately.

Audient

The NERO is designed for desktop monitoring with multiple speaker and headphone outputs, cue mix and talkback.

  • Audient lists three stereo speaker outputs and four headphone outputs. Its technical specifications give dimensions of 255 × 75 × 155 mm.
  • For one source and one pair of speakers, the extra routing and desk space required may be more than you need.

Related products

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily: if your interface already gives you easy access to the controls you need, an extra device isn’t essential. A separate controller can be useful if you’re missing an easy-to-reach volume knob, mono, dim or mute functions, or the ability to switch between sources and pairs of monitors.

How do I connect a passive monitor controller?

Place the controller in the monitoring signal path between the output of your audio source or interface and the input of your speakers. Before connecting anything, check the connectors and manual for the exact model; the Palmer MONICON M G2 and Heritage Audio Baby RAM, for example, offer different connection options.

How can I avoid unexpectedly loud playback at a shared desk?

Turn the level down before switching sources or monitoring routes, and use mute when you don’t want to hear the speakers temporarily. The World Health Organization says that both sound level and listening time matter when it comes to exposure to loud sound; a volume control doesn’t automatically limit that exposure.

What if the controller breaks too quickly during normal use?

In the Netherlands, in addition to any manufacturer’s or seller’s warranty, you have statutory consumer rights: the product must meet what you could reasonably expect from it. ACM ConsuWijzer says that if a product is faulty, the seller must offer an appropriate remedy at no cost, such as a repair or replacement. Don’t assume there’s one fixed statutory warranty period for all products.

What product rules must an electronic monitor controller meet in the Netherlands?

The applicable European product rules depend on the specific device. The Dutch government’s Ondernemersplein states that electrical or electronic equipment placed on the Dutch market must comply with the relevant rules; equipment with Bluetooth is also subject to regulations for radio equipment.