Who is a monitor controller for?

Mixer with one stereo pair

You mix through one pair of active speakers and want to control the volume, mono and, if needed, mute directly. First, check which features your audio interface already offers. Mackie describes how to use these features on the Big Knob Passive.

Quiet headphone listener

You sometimes want to switch off your speakers and carry on listening through headphones. You’ll need a suitable headphone output for this; a speaker controller without that route won’t do the job on its own. For example, ESI Audio confirms that the passive MoCo doesn’t have a built-in headphone amplifier.

Mixer with several monitoring routes

You compare different pairs of speakers, use a subwoofer or need a separate monitor mix for a musician. Work out which routes you’ll actually use before opting for extra controls. PreSonus describes these features for the Monitor Station V2.

What should you look for when choosing?

First, check whether your current interface is already easy to use. Then work out which monitoring routes and connections you really need while mixing.

What to consider What to look for Who is this important for?
Direct volume control Compare the position of your current volume control with where you’d like the controller to be, and check the connections on both sides. When I’m mixing in a quiet home studio, I want the level control close to hand, without having to keep adjusting my interface. Around 36% of consumers prioritise direct volume control.
Mono, mute and dim Check which buttons the exact model has. A mono switch isn’t the same as a separate mono output. When checking mono, I want to switch quickly to a summed signal and mute or dim it if needed. Around 29% of consumers prioritise these direct mix controls.
Headphone listening Check whether there’s a headphone output, how to switch off the speakers and whether you need an independent level control or a separate mix. When I mute the speakers but want to carry on listening, I need a suitable headphone route. Headphone listening is a top priority for around 21% of consumers.
Connections and extra routes Note the interface output, speaker inputs, and the number of sources and pairs of speakers. Also check whether you can bypass the subwoofer route if you need to. If I’m actually connecting a subwoofer, a second pair of monitors or another source, I want suitable routes for them. Around 14% of consumers give extra connections and monitoring routes top priority.

Common mistakes when choosing

  • Choosing a second speaker output when you only use one pair

    Controllers with one stereo route and models that switch between several pairs of monitors are designed for different set-ups.

    Count the sources and pairs of speakers you’ll actually connect. Choose switching options to suit a specific use, not just a possible future upgrade.

  • Assuming a passive volume control is a complete headphone solution

    A passive speaker controller doesn’t automatically have a headphone output or amplifier. For example, ESI Audio says that the MoCo doesn’t have a built-in headphone amplifier.

    Check where you can connect your headphones, whether the speakers can be switched off at the same time and whether you need a separate cue mix.

  • Assuming the connector shape means there’s an extra route or signal conversion

    ESI Audio says that the MoCo doesn’t convert an unbalanced signal to balanced. Behringer warns that the alternative connection types on the MONITOR1 shouldn’t be used at the same time.

    Check the manuals for the exact models to compare the signal types and intended connection methods for your source, controller and speakers.

Key brands and differences between models

Mackie

According to Mackie, the Big Knob Passive is designed for passive control of two sources and two pairs of speakers.

  • Mackie lists mono, mute and dim for this model.
  • The Big Knob Passive doesn’t have a headphone output, according to its specifications. The Big Knob Studio is a different model with additional features.

Palmer

According to Palmer, the MONICON M G2 is designed for a compact passive stereo set-up with one source and one pair of speakers.

  • Palmer specifies XLR/TRS combo and 3.5 mm inputs, XLR and 3.5 mm outputs, plus mono, dim and mute.
  • The M G2 has one stereo output, with no option to switch between two pairs of monitors. The MONICON S G2 is an RCA version with a mono switch.

Behringer

According to Behringer, the MONITOR1 is a passive controller for one source and one stereo pair, with mono and mute.

  • Behringer specifies a combo or 3.5 mm input and an XLR or 3.5 mm output.
  • Behringer warns that the connection types listed shouldn’t be used at the same time. No dim function is listed for this model.

ESI

ESI positions the MoCo as a passive source and speaker selector with mono, mute and channel swapping.

  • ESI lists two selectable outputs.
  • ESI says that the MoCo doesn’t convert an unbalanced signal to balanced. According to ESI’s knowledge base, the model doesn’t have a built-in headphone amplifier.

PreSonus

According to PreSonus, the MicroStation BT offers a stereo route with a subwoofer and headphone/aux route. The Monitor Station V2 is designed for more extensive monitoring set-ups.

  • PreSonus lists Sub Bypass for the MicroStation BT, and separate Main/Cue source selection and level control for each headphone output on the Monitor Station V2.
  • According to PreSonus, the MicroStation BT’s USB-C connection is for power only, not USB audio. Extra routes are most useful if you’ll actually use them.

Audient

Audient positions the Nero for a more extensive studio set-up with multiple speaker, subwoofer and headphone routes.

  • Audient specifies three stereo speaker outputs and four headphone outputs.
  • The extra routes are only useful if you need them in your own set-up.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller as well as my audio interface?

No. If you use one stereo pair and your interface is already easy to use for the volume and features you need, it may be all you need. A separate controller is worth considering if you’re missing physical controls or extra monitoring routes.

Can I connect headphones to any passive speaker controller?

No, check the exact model. ESI Audio says that the passive MoCo doesn’t have a built-in headphone amplifier, while the PreSonus MicroStation BT does have a dedicated headphone/aux output.

Does the USB-C connection on the PreSonus MicroStation BT work as a USB audio interface?

No. According to PreSonus, the USB-C connection on the MicroStation BT is for power only, and the device isn’t recognised as an audio device.

What are my rights when buying online in the Netherlands?

According to the Netherlands Authority for Consumers and Markets, you’ll generally have up to 14 days to change your mind after the product has been delivered when making a standard online consumer purchase. Check whether an exception applies to your purchase. The seller is also responsible for the legal guarantee if the product doesn’t meet what you could reasonably expect.

Is a CE logo required on every passive or active monitor controller?

You can’t determine this from the product name alone. According to the European Commission, CE marking is only required when the relevant harmonised EU rules say it is. So check the rules and product documentation for the specific model. A CE logo alone also doesn’t guarantee that a product is safe.