Who is a monitor controller for?

Solo editor with one pair of speakers

When sorting through rehearsal takes, you want to adjust the volume, mute and check in mono straight away, without complicated routing. Palmer’s product specifications list mono, dim and mute functions for the MONICON M G2.

Editor comparing monitoring setups

You use more than one source or pair of speakers and want to switch between them. The features of the Mackie Big Knob Passive and Drawmer CMC2 show why the number of connections varies from model to model.

Editor listening back with musicians

You may need separate headphone controls, a cue signal or talkback. PreSonus lists these features for the Monitor Station V2.

What should you look for?

Start with your current source, the number of speaker pairs and how many people need to listen on headphones at the same time. Consider the position of the window separately: that’s a question about your workspace, not the audio features.

What to consider What to check Who this matters to
Quick, controlled monitoring Check whether the exact model offers volume, mute, dim and mono functions, and is compatible with your source and speakers. If I listen back to rehearsal takes often, I want to adjust the level straight away and check in mono quickly. Around 33% of consumers prioritise quick level adjustments and mono checks.
Switching between sources and speaker pairs Count stereo sources and speaker pairs separately, then check the model’s connections and selection options. When I use different sources or monitoring setups, I want to switch between them without having to reconnect everything each time. Around 25% of consumers prioritise having this choice.
Headphones, cue and communication Check the number of headphone outputs, independent level controls and, if needed, the option to select main or cue, or use talkback. If musicians or other listeners need their own headphone level or cue, the routing needs to support this. Around 25% of consumers prioritise shared headphone listening or cue controls.
Workspace next to a bright window First check your screen position and any blinds; also make sure the controller’s buttons are easy to reach. If daylight reflects off my screen, I want to address the viewing direction and light first; an audio controller won’t solve that. Around 17% of consumers start by adjusting their workspace.

Common mistakes

  • Assuming ‘passive’ means it only has a volume control

    Passive models can offer a range of features. The Mackie Big Knob Passive lets you select sources and speakers, while the Palmer MONICON M G2 has one stereo output. According to its model specifications, the Big Knob Passive doesn’t have a headphone output.

    Compare the features of the exact model rather than relying on the passive or active label alone. If you need headphones, factor in a separate headphone solution.

  • Confusing a speaker output with an extra headphone mix

    Selecting speakers and choosing main or cue separately for each pair of headphones are different features. An extra pair of speakers doesn’t, by itself, give you extra headphone controls.

    Count the number of speaker pairs and the number of people listening on headphones at the same time separately. Also check whether each listener needs their own level control.

  • Buying a controller to fix reflections from a window

    An audio monitor controller manages what you hear, but it won’t change the light falling on your computer screen.

    First check the screen’s position in relation to the window and consider using blinds. For screen-based work, Arboportaal recommends, among other things, positioning your line of sight parallel to the window.

Brands to consider

Palmer

The MONICON M G2 is a compact passive option for one stereo source and one pair of speakers.

  • The product specifications list mono, dim and mute functions, XLR/TRS and 3.5 mm connections.
  • With one stereo output, you can’t switch directly between two pairs of speakers.

Mackie

The Big Knob Passive is designed for hands-on control and switching between two sources and two monitoring pairs.

  • The model specifications list mono, mute and dim functions.
  • The Big Knob Passive isn’t specified as having a headphone output; other Big Knob models have different features.

Drawmer

The CMC2 combines two stereo monitor outputs with a subwoofer output and one independently controlled headphone output.

  • Its features suit a setup where you want to switch between monitor pairs and need one headphone output.
  • One headphone output can’t replace multiple independently controlled listening connections.

PreSonus

The Monitor Station V2 is designed for more extensive monitoring and communication during sessions.

  • PreSonus specifies three stereo speaker outputs, four independently controlled headphone outputs and talkback.
  • If there’s just one source and one listener, features for multiple listeners may go unused.

Audient

Nero is designed for a setup with multiple stereo speakers, headphones and an assignable subwoofer.

  • Audient specifies three stereo speaker outputs, four headphone outputs and talkback.
  • Check that the extensive routing suits the number of listeners and monitoring setups you actually have.

Joybuy products

Related products coming soon.

Frequently asked questions

How do I connect a monitor controller when editing recordings?

Use a suitable line output from your audio interface as the source, then connect the monitor outputs to the corresponding speaker inputs. Before buying, check the connectors and the number of stereo channels on the exact model; a monitor controller isn’t automatically an audio interface.

Will a monitor controller make my computer screen easier to see next to a window?

No, an audio monitor controller won’t change the light falling on your screen. For screen-based work, Arboportaal recommends, among other things, positioning your line of sight parallel to the window. Also consider whether you need blinds to prevent reflected daylight.

Do I need a separate headphone output to listen back with others?

That depends on the number of listeners and the routing they need. The Drawmer CMC2 has one independently controlled headphone output; PreSonus specifies four independently controlled outputs with a main or cue option for the Monitor Station V2.

How can I avoid listening back too loudly during long editing sessions?

Start at a low level and take breaks during long listening sessions. The World Health Organization emphasises that both sound level and duration of exposure matter; the position of a volume control alone doesn’t tell you what sound level is reaching your ears.

What cooling-off period applies to online purchases in the Netherlands?

For a standard online consumer purchase, you’ll generally have up to 14 days to change your mind after the product has been delivered; check whether a legal exception applies. ACM ConsuWijzer also states that your statutory guarantee applies alongside the seller’s guarantee. This guarantee is separate from the cooling-off period.