Who is a monitor controller suitable for?

Editor who wants to listen back in silence

You edit while colleagues are working and want to listen through headphones and adjust the level directly. Whether you need a headphone output on the controller depends on the connections available on your existing interface.

Editor who switches between sources

You compare rehearsal recordings using different sources or pairs of speakers, and want source, speaker, mono and mute controls close at hand.

Team with several people listening at once

You want several people to listen at the same time, potentially with separate headphone levels or a cue feed that differs from the main mix.

What should you look for when choosing one?

Start with the listening setup you need: personal monitoring, switching between existing sources and speakers, or letting several people listen at once. Then check that your current interface’s connections and signals are suitable.

What to consider What should you check? Who is this for?
Personal listening Check where your headphones are connected and whether that output has its own volume control; also check how to mute the speakers. When I’m editing in a shared office, I want to listen through headphones without using the speakers as my default playback. Around 36% of consumers prioritise personal listening.
Switching between sources and speakers Count the sources and stereo speaker pairs you actually use, and check the connections for each input and output. When I’m comparing recordings or speaker pairs, I want to switch quickly and use mono, mute or dim when needed. Around 29% of consumers prioritise switching between sources and speakers.
Several listeners Check the number of headphone outputs, their level controls and source selection, as well as whether a cue mix is available. When several colleagues are listening at once, I want to know whether each person can have a suitable level or a different feed. Around 21% of consumers prioritise simultaneous listening feeds.
Connection to your workstation Note your current interface outputs and the inputs, speaker and headphone connections you need; also check whether you need USB recording. When I want to keep using my existing editing setup, I don’t want to pay for features twice, and the connections need to suit my signal path. Around 14% of consumers prioritise compatibility with their existing workstation.

Common buying mistakes

  • Mistaking a passive volume control for a headphone solution

    According to Mackie, the Big Knob Passive has no headphone output. A model with its own headphone output, such as the Palmer MONICON L G2, does provide one.

    Check where your headphones are currently connected and whether you want to keep using that connection. If your interface doesn’t have a suitable output, you may need a separate headphone amplifier.

  • Assuming several headphone sockets mean several independent mixes

    The PreSonus Monitor Station V2 offers a Main/Cue selection for each headphone output; the Audient Nero has a separate cue mix input. To provide a different feed, the required signal must also be available in your existing signal chain.

    Map out the route you want the recording or interface signal to take to each listener, and check that the required cue mix is available.

    If the cue source or routing is missing, you may need to adapt the signal chain or add equipment.

  • Paying for USB recording features you don’t need

    According to Mackie, the Big Knob Studio combines monitor control with a USB audio interface. If you already have a suitable interface, those recording features may be redundant.

    Compare what your current interface can do with the features you’re actually missing.

Brands to consider

Mackie

The Big Knob range includes a passive speaker controller and Studio models that combine monitor control with a USB audio interface.

  • According to Mackie, the Big Knob Passive switches between two sources and two monitor pairs, and has mono, mute and dim controls.
  • According to Mackie, the Big Knob Passive has no headphone output. The two headphone outputs with individual level controls and talkback are features of the Big Knob Studio, not the passive model.

Palmer

The MONICON L G2 is designed for choosing sources and speakers, with personal monitoring; the MONICON XL is a separate model with more outputs.

  • Palmer specifies that the L G2 has one headphone output with its own level control, two stereo speaker outputs and a mono output. According to Palmer, the power supply powers features including Bluetooth and the headphone amplifier.
  • The two headphone outputs and three speaker outputs Palmer lists for the XL do not automatically apply to the L G2.

PreSonus

The Monitor Station V2 is worth considering for setups where you need to control several speaker pairs or headphone listeners.

  • PreSonus specifies three stereo speaker pairs and four headphone outputs, each with its own level control and Main/Cue selection.
  • A Main/Cue selection only provides the cue feed you want if that source is also available in the signal chain.

Audient

The Nero is a desktop controller for multiple sources, speaker pairs and headphone feeds.

  • Audient specifies a separate cue mix input, three stereo speaker outputs and four routable headphone outputs.
  • These connections are most relevant if your setup actually uses the corresponding sources and feeds; the specifications alone do not prove that it will benefit every shared workspace.

TC Electronic

The Monitor Pilot is an option if you want a separate desktop control unit and a separate connection box.

  • TC Electronic specifies connections for up to three stereo speaker sets and a separate control unit.
  • According to TC Electronic, the Monitor Pilot has one headphone socket; it does not provide multiple independent headphone feeds.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need a separate monitor controller if your audio interface already has a volume knob?

Not necessarily. First check whether the knob controls the outputs you use and whether you’re missing source, speaker or headphone routing. For example, Focusrite states that the monitor knob on the third- and fourth-generation Scarlett 4i4 only controls line outputs 1–2.

How do you connect and maintain a monitor controller?

First, map out your interface outputs, the controller’s inputs and the speaker connections, then follow the manual for the exact model. In the Big Knob Passive manual, Mackie instructs users to keep the unit dry and clean it with a dry cloth.

Are you always entitled to exactly two years’ warranty and a 14-day cooling-off period in the Netherlands?

No. The Dutch government states that there is no fixed statutory warranty period in the Netherlands; if a product is faulty, contact the seller, who is responsible for providing goods that conform to the contract. A 14-day cooling-off period applies to many eligible distance purchases by consumers, but not automatically to every purchase, such as an online purchase from a private individual.

Are there rules about listening to recordings at a workplace in the Netherlands?

Yes. For employees, the rules depend on daily noise exposure, not on a fixed volume setting. Arboportaal states that employers must provide hearing protection when daily exposure exceeds 80 dB(A), and that employees must wear hearing protection when exposure exceeds 85 dB(A). Without measuring actual exposure, you cannot tell which threshold is exceeded in a particular workplace.