If you have few power sockets and the connections suit your audio interface and active speakers, start by considering a fully passive monitor controller: it doesn’t need its own power supply. Choose a powered model if you need separate headphone routes, talkback or other extra features, and check in advance which parts of your setup need power.
Who might need a monitor controller when power sockets are in short supply?
For mixers with few power sockets
You already have an audio source and speakers, and mainly want direct volume control without adding another powered controller. Also check the power requirements of the rest of your setup. Mackie and Palmer describe passive models that don’t need their own power supply.
For mixers who need two monitoring routes
You switch between sources or pairs of speakers while mixing and want to do so without unplugging and reconnecting cables. The manufacturers describe both the Mackie Big Knob Passive and ESI MoCo as controllers with two stereo routes.
For mixers who need a separate headphone cue
You want someone to listen to a separate cue or communicate with performers. These features may require a powered controller or separate equipment; ESI, Palmer and PreSonus describe different options on their respective models.
What should you look for when buying a monitor controller?
| What to consider |
What should you check? |
Who is this important for? |
| Power |
Check whether the exact model is fully passive, and count the power sockets needed for your interface, active speakers and any headphone amplifier separately. |
If I want to keep a power socket free, I’ll look for a controller that doesn’t need its own power supply. Around 28% of consumers say saving a power socket is their top priority. |
| Connections |
Compare the connectors and signal types used by your interface, controller and speakers. RCA, XLR and TRS connections aren’t interchangeable unless the equipment has suitable connections. |
If my existing cables and equipment need to work together, I’ll check the whole signal chain in advance. Around 22% of consumers prioritise compatible audio connections. |
| Switching between routes |
Count the stereo sources and pairs of speakers you actually use. Two monitor pairs are only useful if you want to switch between those routes. |
If I compare a second source or pair of speakers while mixing, I want to switch between them without unplugging anything. Around 22% of consumers say switching between routes is their top priority. |
| Direct controls |
Check the exact model’s features, such as mono, dim and mute. Not every model has all three. |
If I use these controls often while mixing, I want to operate them directly on the controller. Around 17% of consumers prioritise direct mixing controls. |
| Headphone cue |
Check whether it has an amplified headphone output, a separate cue selection and, if needed, talkback. Also check how these features are powered. |
If someone needs a separate cue or needs to communicate with performers, a speaker controller alone won’t be enough. Around 11% of consumers prioritise a separate cue or communication features. |
Common mistakes when choosing a monitor controller
-
Assuming ‘passive’ means ‘all features work without power’
A passive volume path doesn’t automatically mean that extra features work without power too. Palmer, for example, says the MONICON L G2’s power supply runs features including Bluetooth and the headphone amplifier.
Check the power requirements of each feature you want to use, rather than relying on the word ‘passive’ alone.
-
Choosing a controller based on how many buttons it has
Connections vary between models. The ESI MoCo also doesn’t convert an unbalanced signal to a balanced one.
Before buying, note the output from your audio source and the inputs on your controller and speakers, including the connectors and signal types. If they don’t match, you may need a different controller or suitable cables.
-
Mistaking a passive speaker output for a headphone socket
ESI says the MoCo doesn’t have a built-in headphone amplifier. So a passive controller with speaker controls won’t automatically replace a separate headphone cue.
Check whether the exact model has an amplified headphone output and the cue controls you need.
Monitor controller brands to consider
Mackie
The Big Knob Passive is designed for two stereo sources and two monitor pairs, without needing power for the controller. Studio and Studio+ are separate models with different features.
- Mackie says the Big Knob Passive has mono, dim and mute controls.
- The Big Knob Passive doesn’t have a headphone output. Mackie says the Studio and Studio+ need an external power supply and don’t run on USB bus power.
Palmer
The MONICON S G2 provides a compact RCA route, while the M G2 has different connections and direct controls. The L G2 offers additional routes and headphone features.
- Palmer says the S G2 doesn’t need a power supply. The L G2 includes features such as Bluetooth and a headphone amplifier.
- The L G2 needs a power supply for features including Bluetooth and the headphone amplifier. Passive volume control doesn’t mean that all features work without power.
ESI
The MoCo is a passive controller for switching between two stereo inputs and two stereo outputs.
- ESI says the MoCo has mono, mute and left-right swap functions.
- The MoCo doesn’t convert an unbalanced signal to a balanced one and doesn’t have a built-in headphone amplifier.
Behringer
The MONITOR1 is a passive volume controller for one speaker route, with connections including XLR/TRS combo and 3.5 mm inputs.
- Behringer says the MONITOR1 has mono and mute controls.
- The manufacturer says not to use the combo input and the 3.5 mm input at the same time. This model isn’t designed for switching between two separate pairs of speakers.
PreSonus
The Monitor Station V2 is a more extensive model for setups with multiple listeners, pairs of speakers or communication with performers.
- PreSonus says this model has three stereo speaker pairs, four independently controlled headphone outputs and talkback.
- Check that the power supply and space required suit your setup.
Monitor controllers at Joybuy
Related products will be available soon.
Frequently asked questions about monitor controllers
Will a passive controller also save power for my speakers?
No. For the passive models mentioned, ‘doesn’t need a power supply’ refers to the controller. Palmer describes the MONICON S G2 as a device that sits between an audio interface and active speakers, so check the speakers’ power requirements separately.
Where do I connect a monitor controller?
A monitor controller sits in the analogue monitoring path between a compatible source, such as an audio interface, and the speakers. Before buying, compare the connections and signal types of all your equipment. ESI says the MoCo doesn’t convert an unbalanced source to a balanced one.
Can I connect headphones directly to a passive ESI MoCo?
Not as a replacement for a headphone amplifier: ESI says the MoCo doesn’t have a built-in amplifier. For a separate cue, use a suitable amplified output or another compatible solution.
What are my rights in the Netherlands if my purchase is faulty?
When you buy as a consumer, you’re entitled to a product that is of satisfactory quality. According to the Dutch government, there’s no fixed statutory guarantee period in the Netherlands. What you can expect depends on factors including the product, and the retailer is your point of contact if something is wrong. A separate manufacturer’s guarantee doesn’t replace this right.
Does every monitor controller sold in the Netherlands need a CE marking?
Not without first establishing which product category and EU rules apply to the specific model. According to Your Europe, the European Union’s website, CE marking is only required for products covered by specific harmonised rules that require it. Check which rules apply to the exact model, and don’t assume it complies based solely on a sales listing.