Who is a monitor controller for?

Mixers with few spare power sockets

You already have an audio interface and active monitors, and mainly want convenient control without needing an extra power supply for the controller. Palmer and Omnitronic describe the passive models mentioned here as requiring no power of their own.

Mixers with two pairs of monitors

You want to switch between two existing stereo pairs while mixing, without having to unplug and reconnect cables. Check that the number of inputs and outputs, and the connectors, are compatible with your equipment. Mackie and ESI describe models with two monitor outputs.

Recording musicians who need a separate headphone mix

You’re recording musicians and want them to have their own monitoring route. Compare the headphone and cue features of a model such as PreSonus with what your audio interface already offers.

What should you look for when choosing one?

What to consider What should you check? Who is this important for?
Operation without an extra power supply Check whether the exact model is passive and which other devices in your signal chain still need power. Active monitors will still need their own power supply. If easy-to-reach volume control is what I mainly want while mixing, and I don’t want to plug in a power supply for the controller, this is my top priority. Around 36% of consumers share this priority.
Mono and level control Check which controls the model has and whether mono works on the monitoring route you use. Palmer and Radial describe mono controls on the models mentioned here; available features vary by model. If I want to check my stereo mix in mono or adjust the level quickly, I’ll focus on these controls. Around 29% of consumers say mono and level control are their main considerations.
Switching and connections Count the sources and monitor pairs you actually use, then compare their connectors and signal types with the inputs and outputs. ESI states that the MoCo does not convert an unbalanced signal to balanced. If I want to switch between existing sources or monitor pairs while mixing, the routes and cables need to be compatible. Around 21% of consumers rank this as their top priority.
Separate headphone or recording route Check how many headphone outputs there are, whether you can select their source independently and whether the model replaces a device in your current setup. The PreSonus Monitor Station V2 offers a Main/Cue selection for each headphone output; the Mackie Big Knob Studio needs an external power supply. If I’m recording string players who need their own headphone route alongside my mix, these features may matter more than passive control. Around 14% of consumers say a separate headphone or recording route is their main priority.

What to watch out for when buying

  • Assuming a passive controller means the whole studio can run without power

    ‘Passive’ refers to the controller itself. Active monitors and other equipment in the signal chain may still need their own power supplies.

    Count the power sockets needed for your entire setup before choosing a model.

  • Confusing a mono button with extra monitor or headphone outputs

    Mono control doesn’t automatically give you more monitoring routes. A model for one stereo pair won’t automatically provide a second monitor pair or a separate cue mix.

    Check what each input and output does separately from the controls available.

  • Connecting a line controller to a speaker-level output

    Radial warns that speaker-level signals can damage the SAT-2’s circuitry; this controller is designed for line level.

    Before connecting it, check that the controller is in the correct line-level signal path.

  • Assuming a USB connection means the device is powered via USB

    Mackie states that the Big Knob Studio does not run on USB bus power and needs an external power supply.

    Check how the exact model is powered, even if it has USB connections.

Brands to compare

Palmer

The MONICON S G2 is designed for one stereo route with RCA connections; the MONICON M G2 has XLR/TRS combo and 3.5mm connections.

  • Palmer says the S G2 needs no power and has a mono button.
  • The S G2 has one stereo input and one stereo output; the M G2 is also designed for one stereo output.

ESI

The MoCo is a passive option for switching between two stereo sources or monitor outputs.

  • ESI specifies two stereo inputs, two stereo outputs, mono and mute.
  • ESI states that the MoCo does not convert an unbalanced signal to balanced.

Mackie

The Big Knob Passive is designed for passive switching between sources and monitor pairs; the Big Knob Studio is a separate option with interface and communication features.

  • Mackie says the Big Knob Passive switches between two sources and two monitor pairs.
  • The Big Knob Passive has no headphone outputs. Mackie confirms that the Big Knob Studio needs an external power supply.

Radial Engineering

The SAT-2 is a passive stereo controller for a signal route between an audio interface and one pair of active speakers.

  • Radial specifies mono, mute and adjustable dim, with no power required.
  • Radial says the SAT-2 is designed for line level only; speaker-level signals can damage the device.

Omnitronic

The VC-11 is a passive level controller for an existing analogue stereo route.

  • The manufacturer lists mono and mute, and says the VC-11 needs no power.
  • The VC-11 can attenuate the signal but can’t amplify it; compare the connections before choosing your cables.

PreSonus

The Monitor Station V2 is designed for setups with multiple monitor pairs and separate headphone and cue routes.

  • PreSonus specifies three stereo monitor pairs, four headphone outputs with Main/Cue selection and talkback.
  • Check that the power supply and features suit your setup, and compare them with what your existing interface already offers.

Related products

Related products coming soon.

Frequently asked questions

Does a passive monitor controller replace the power supply for your active monitors?

No. For the passive models mentioned here, ‘no power required’ refers to the controller itself. Active monitors may still need their own power supplies, so count the sockets needed for your entire setup.

Where do you connect a monitor controller?

A suitable controller goes in the analogue line-level signal path between your source, usually the audio interface, and your active monitors or amplifier. Don’t connect the Radial SAT-2 to a speaker-level output: Radial warns that this can damage its circuitry.

How do you check the connections and cables?

Before connecting everything, compare the controller’s input and output connectors with those on your source and monitors. Turn the monitoring volume down when testing a new route. Also check the signal type: the ESI MoCo does not convert an unbalanced signal to balanced.

What is the cooling-off period for an online purchase in the Netherlands?

For eligible online consumer purchases, ACM ConsuWijzer states that you have up to 14 days to change your mind after the product has been delivered. Check whether this applies to your purchase and review the terms and conditions for your order.

Is CE marking compulsory for every monitor controller in the Netherlands?

This can’t be determined solely by the product category. The Dutch government states that CE marking is compulsory when a product falls within a designated product group. For a specific model, check the relevant product information and conformity documentation.