Who is this for?

Mix engineer with few spare sockets

You already have an audio interface and want to control your speakers directly, without adding another powered device to your workspace. First, check that a passive controller is compatible with your connections.

Mix engineer comparing monitoring setups

You switch between two pairs of speakers or sources while mixing, and want to know whether you can do so without powering the controller separately.

Mix engineer with multiple monitoring options

You use separate headphones, a subwoofer or additional sources. In your setup, these features may matter more than having a controller that doesn’t need its own power supply.

What should you look for?

When sockets are scarce, start by checking the power requirements. Then count the connections and monitoring options you’ll actually use.

What to consider What to look for Who is this important for?
No extra power supply Check whether the exact model is passive or needs an adaptor or USB power. If every spare socket is already needed for other equipment, I don’t want my controller to need another power connection. This is the main concern for around 36% of consumers.
Direct control Check whether the model has an easy-to-reach volume control and the mono, dim or mute function you want. While mixing, I want to control the volume and switch to mono directly, rather than having to use software each time. Around 29% of consumers put direct control first.
Sources and monitor pairs Count the sources and pairs of speakers you want to connect, and check how many can be switched independently. If I want to switch between my existing sources or pairs of speakers, the controller needs enough suitable options. Around 21% of consumers prioritise this comparison.
Extra monitoring features Check the headphone, subwoofer and additional source options, as well as the power requirements. If I use separate headphone options, a subwoofer or additional sources, I consider those features more important than having a controller that doesn’t need its own power supply. Around 14% of consumers prioritise these extra options.

Common pitfalls

  • Assuming ‘USB’ means ‘no extra power needed’

    USB audio and power are not the same thing. Mackie says the Big Knob Studio and Studio+ need an external power supply. On the PreSonus MicroStation BT, USB-C is for power only and doesn’t carry USB audio.

    Check separately whether USB transfers audio, powers the device or does both.

  • Choosing a controller with one stereo output for two pairs of monitors

    According to Palmer, the MONICON M G2 has one stereo output. That doesn’t provide the two separate monitor options you need to switch between two pairs of speakers.

    Count the pairs of monitors you’ll actually use and check how many outputs can be switched independently.

  • Mistaking a passive volume control for a replacement interface

    Mackie says the Big Knob Passive doesn’t have its own USB interface or headphone output. A passive controller therefore won’t automatically replace the recording or headphone features of your audio interface.

    Make a note of the features your interface already provides, then check which ones you might still need.

Brands to consider

Mackie

The Big Knob Passive is designed for two sources and two pairs of monitors, with no power supply of its own. The Big Knob Studio is a separate model with a USB audio interface.

  • Mackie lists mono, mute and dim functions for the Big Knob Passive.
  • The Passive doesn’t have its own USB interface or headphone output. According to Mackie, the Big Knob Studio and Studio+ need an external power supply.

Palmer

The MONICON M G2 is a passive controller for one stereo source and one stereo monitor path.

  • Palmer specifies XLR/TRS combo inputs and 3.5 mm inputs, XLR outputs and 3.5 mm outputs, as well as mono, dim and mute functions.
  • It has one stereo output, so check that it suits the monitor path you want to use.

Radial Engineering

The SAT-2 is a passive stereo attenuator designed to sit between, for example, an audio interface and one pair of active speakers.

  • Radial says the SAT-2 doesn’t need a power supply and offers mono, dim and mute functions.
  • Its two-channel stereo path isn’t designed for switching between two separate pairs of monitors.

Heritage Audio

The Baby RAM is a passive option for a setup with two stereo sources and two pairs of monitors.

  • Heritage Audio specifies TRS connections, a 24-step volume control and no need for a power supply.
  • Check that the TRS connections are compatible with your existing equipment.

Audient

The Nero is designed for more advanced monitoring, with multiple speaker and headphone options.

  • Audient specifies three stereo speaker outputs, four headphone outputs and digital inputs.
  • According to Audient, the Nero needs a 12 VDC adaptor, so you’ll need an available power source.

PreSonus

The MicroStation BT is an option if Bluetooth or a separately switchable subwoofer path is part of your setup.

  • PreSonus specifies Bluetooth and a subwoofer output with a switchable bypass.
  • According to PreSonus, USB-C is for power only and doesn’t carry USB audio. The supplied USB cable needs a USB power source; a power adaptor isn’t included.

Joybuy products

Related products will be available soon.

Frequently asked questions

Does a passive monitor controller also save power for your speakers?

No. For the passive models described here, ‘no power needed’ refers to the controller itself. Radial describes the SAT-2 as sitting between an audio interface and a pair of active speakers. Check the power requirements for the rest of your setup separately.

Where do you connect a basic passive controller?

Place a compatible model in the analogue stereo signal path between your audio interface outputs and your speaker inputs. Check the connections at both ends first: for example, Palmer specifies XLR/TRS combo inputs and 3.5 mm inputs for the MONICON M G2, plus XLR outputs and 3.5 mm outputs.

Does USB-C on the PreSonus MicroStation BT also give you an audio interface?

No. According to PreSonus, the USB-C connection on the MicroStation BT is for power only, so the controller won’t appear as a USB audio device on your computer. PreSonus says a USB cable is included, but a power adaptor isn’t.

Does every passive or powered monitor controller need a CE mark in the Netherlands?

There isn’t a simple yes or no that applies to every model. The European Commission says CE marking is only required when specific applicable EU rules require it for the product. Check which product rules apply to the model being sold; without that assessment, a missing mark doesn’t in itself prove a breach.

How do warranties and cancellation rights work when buying online in the Netherlands?

According to ACM ConsuWijzer, if you use a product normally, you’re entitled to one that meets what you could reasonably expect; there isn’t one fixed statutory warranty period for every product. Online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to applicable exceptions.