Mixer with one pair of monitors
You already have an audio interface and active monitors, but want a physical volume control close to hand while mixing, without plugging another controller into the mains.
If you already have an audio interface and active studio monitors and mainly want to control the listening volume, a passive monitor controller is an obvious choice: it doesn’t need its own power supply. Only opt for extra source or speaker switching, headphone or subwoofer controls if you’ll use them, and check both the connections and the power requirements. A passive controller won’t eliminate the need to power your active monitors.
You already have an audio interface and active monitors, but want a physical volume control close to hand while mixing, without plugging another controller into the mains.
You want to switch quickly to mono while mixing, or toggle between sources or pairs of monitors to check your mix decisions.
You also use headphones or a subwoofer and are weighing up whether the controls you want are worth choosing a controller that needs power.
Start with the power available and your existing signal path. Then compare the controls and connections you want with what you actually use while mixing.
| What to consider | What to look for when buying | Who should pay extra attention? |
|---|---|---|
| No extra power supply | Check whether the exact model is passive. If it needs power, decide in advance where it will come from. | If my sockets are already full, I don’t want to need another plug for a controller. Around 36% of consumers in this mixing scenario give avoiding an extra power supply top priority. |
| Direct mix controls | Check whether the model has the volume control and mono, mute or dim functions you want. | If I want to adjust the level or check in mono quickly while mixing, I want those controls close to hand. Around 29% of consumers prioritise direct control while mixing. |
| Connections and switching | Count the stereo sources and pairs of monitors you use, and check the connectors and signal paths that can be used at the same time. | If I want to compare sources or pairs of monitors, the connections need to suit my setup. Around 21% of consumers give these monitoring options top priority. |
| Headphones or subwoofer | Check which outputs and controls the exact model has, and what power it needs. | If I also want to control headphones or a subwoofer from the controller, I check those features before choosing a passive model. Around 14% of consumers prioritise these extra monitoring features. |
According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only; it doesn’t make the device a USB audio device.
Check the documentation for the exact model to see what its USB connection does and how to power the device.
PreSonus states that the power adapter isn’t included with the MicroStation BT, so make sure you have a suitable USB power source in advance.
ESI states that the passive MoCo doesn’t have a built-in headphone amplifier.
Check your existing headphone setup before choosing a controller that only handles speaker signals.
If your current setup doesn’t provide headphone amplification, you’ll need a separate solution.
According to Behringer, you can’t use the MONITOR1’s combo inputs and 3.5 mm input at the same time. The different output types can’t be used simultaneously either.
Check the connection diagram for the exact model and count the signal paths you can actually use at the same time.
The fire service advises against connecting extension leads together and recommends using undamaged extension blocks.
Plan the power supply for your interface, monitors and any controller separately. A passive controller doesn’t remove the need for the other electrical connections.
The Big Knob Passive is designed for a setup with two sources and two pairs of monitors, without a separate power supply for the controller.
The MONICON S G2 suits an RCA stereo source and one pair of RCA stereo monitors; the MONICON M G2 has different connections and direct mono, dim and mute controls.
The MONITOR1 is a passive option for volume control, with direct mono and mute controls.
The MoCo is designed for passive control of two stereo inputs and two stereo outputs, with mono and mute controls among its features.
The MicroStation BT is worth considering if headphone, subwoofer or Bluetooth source control matters more to you than having a fully passive controller.
Place a suitable model in the line-level signal path between your audio interface or another source and the inputs of your monitor speakers. Check that the connections on all the devices match, and start with the listening volume turned down low; the controller doesn’t power the speakers.
No. According to PreSonus, USB-C on the MicroStation BT is for power only; it doesn’t make the device appear as a USB audio device on your computer.
It depends on the model. ESI states that the passive MoCo doesn’t have a built-in headphone amplifier, so check whether your interface or another device can power your headphones.
When you buy from a business online, you generally have 14 days to change your mind, according to the Dutch government. Different rules apply when buying from a private seller. In addition, according to ACM ConsuWijzer, the seller must offer an appropriate, free solution if a product breaks during normal use sooner than you could reasonably expect. This isn’t a fixed two-year legal guarantee period.
Not automatically: according to the Netherlands Enterprise Agency, CE marking is required for certain product groups. It’s a conformity marking, not a quality mark or a guarantee of safety. Check which rules and documentation apply to the specific electrical product.