Who is a monitor controller suitable for?

Mixer with one pair of speakers

You have a compact wired setup and want to control your listening volume directly. Compare the controller’s inputs and outputs with those on your interface and monitors; Palmer and Behringer describe models designed for a single stereo pair.

Late-night mixer

You want to be able to switch to headphones while mixing. Check the headphone routing on the exact model: ESI says the MoCo doesn’t have a built-in headphone amplifier, while PreSonus lists a headphone output on the MicroStation BT.

Mixer comparing setups

You want to check the piano balance in mono or switch between sources or pairs of speakers. Mackie and Palmer list mono, dim and mute functions on specific models; check which switches and routing options each controller has.

What should you look for when choosing one?

Start with the connections and features you’ll actually use in your existing setup. Extra routing options are mainly useful if you want to switch between sources or pairs of speakers.

What to consider What to look for Who this matters to
Connections and volume Compare connector types, balanced or unbalanced signal routing, and how many stereo pairs you need. ESI says the MoCo doesn’t convert an unbalanced signal to balanced. If I want to connect my interface directly to my monitors and keep the volume control within easy reach, the connections and signal routing need to be right. Around 36% of consumers prioritise connections and volume control.
Headphone routing Check whether the exact model has a headphone output and how to switch off the monitors. ESI says the MoCo can’t drive headphones; PreSonus lists a headphone output on the MicroStation BT. If I want to mix quietly in the evening, I need a usable headphone output and want to know whether my interface already has one. Around 29% of consumers prioritise listening on headphones.
Mono and level control Check whether each model has mono, dim and mute functions. Mackie lists these features for the Big Knob Passive, and Palmer for the MONICON M G2; Genelec points out that speaker placement and room reflections also affect what you hear. If I want to check the piano mix quickly in mono or at a lower level, I want those controls close to hand. Around 21% of consumers prioritise mono and level control.
Switching between sources and monitor pairs Count the stereo sources and monitor pairs you actually want to use. Mackie and ESI list two stereo inputs and two monitor routes; the MicroStation BT described by PreSonus has one stereo main output and a subwoofer output. If I want to switch between connected sources or pairs of speakers, the controller needs to offer those routes; a subwoofer output isn’t the same as a second stereo pair. Around 14% of consumers prioritise switching between sources or pairs of speakers.

Common buying mistakes

  • Buying a passive speaker controller for headphones

    A passive monitor route doesn’t automatically provide a headphone output. ESI says the MoCo doesn’t have a built-in headphone amplifier and can’t drive headphones.

    Check the headphone routing on the exact model and see whether your existing interface already has a suitable output.

    Without a suitable output, you may need a separate headphone amplifier or another suitable output.

  • Mistaking a USB-C power port for an audio interface

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only and doesn’t carry audio from a computer.

    Check whether USB on the exact model is for audio or for power only.

    You may also need a separate audio interface.

  • Paying for extra switching features you won’t use

    A second source or monitor route is only useful in practice if you actually need it.

    Before choosing, count how many sources and pairs of speakers you want to connect.

    Unused routes can mean extra connections and cables.

  • Expecting a monitor controller to correct your room’s acoustics

    A volume control or switching function won’t change the room’s acoustics. Genelec explains that speaker placement and room reflections affect what you hear.

    Alongside the controls, aim for a listening setup that’s as symmetrical as possible. Don’t treat the controller as a substitute for considering your room.

Brands to consider

Palmer

Palmer describes the MONICON M G2 as a passive controller for one stereo pair; the MONICON L G2 is designed for more extensive setups.

  • Palmer lists mono, dim and mute functions for the MONICON M G2.
  • According to Palmer, the separately controlled headphone output and two stereo outputs are features of the L G2, not the M G2.

Mackie

According to Mackie, the Big Knob Passive is designed for switching between analogue sources and monitors; the separate Big Knob Studio combines monitor controls with a recording interface.

  • Mackie lists two sources, two monitor pairs, and mono, dim and mute functions for the Big Knob Passive.
  • The Big Knob Studio’s USB recording features aren’t available on the Big Knob Passive.

PreSonus

According to PreSonus, the MicroStation BT is designed to combine a wired interface with headphones, Bluetooth and a subwoofer, among other things, in a single monitoring setup.

  • PreSonus lists a headphone/aux output, Bluetooth and sub bypass.
  • According to PreSonus, the USB-C connection is for power only and isn’t a USB audio connection.

ESI

ESI describes the MoCo as a passive controller for two stereo sources and two monitor routes, with different types of connections.

  • ESI lists mono, mute and left-right switching.
  • According to ESI, the MoCo has no headphone amplifier and can’t drive headphones.

Behringer

Behringer describes the MONITOR1 as a passive volume control between a stereo source and one pair of monitor speakers.

  • Behringer lists mono and mute, with XLR/TRS combo inputs and XLR outputs.
  • The specifications for this model don’t confirm support for a second stereo monitor pair, a dim button or a headphone output.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect my headphones to any passive monitor controller?

No, a passive monitor controller doesn’t automatically have a headphone amplifier. ESI says the MoCo can’t drive headphones; check the output on the exact model or use a suitable output on your interface.

How do I connect a controller without expecting it to fix my room’s acoustics?

Compare the outputs on your interface with the inputs on the controller, then connect the controller outputs to your monitors. Position the speakers as symmetrically as possible around your listening position; according to Genelec, room reflections and speaker placement affect what you hear.

Is the USB-C port on the PreSonus MicroStation BT also a USB audio connection?

No, PreSonus says the USB-C connection is for power only. So don’t expect this port to send audio from your computer to the controller.

What return and warranty rights apply to an online purchase in the Netherlands?

For a standard online consumer purchase, you generally have a legal cancellation period of up to 14 days after delivery; check which exceptions apply. You’re also entitled to a product that meets the required standard. According to the Dutch government, there’s no fixed statutory warranty period in the Netherlands; contact the seller if the product is faulty.

Does a monitor controller need a CE marking in the Netherlands?

A CE marking is required if the specific product falls under EU rules that require one; it isn’t a universal quality mark for every product. The European Union lists electrical and electronic equipment as a category that may be covered by such rules. Check which requirements apply to the exact device and any power supply included with it.