Mixer with one pair of monitors
You already have an audio interface and want to control your monitoring volume directly from your standing desk. Check whether a simple passive controller will connect to your existing equipment.
If you already have an audio interface and one pair of active studio monitors, start with an easy-to-reach volume controller whose connections suit your equipment. Mono, mute and dim are useful extras if you want to access them quickly while mixing. Choose a more feature-packed model if you actually switch between speakers or need headphone mixes and talkback during recording. If your desk is height-adjustable, check that there’s enough room for the cables to move freely.
You already have an audio interface and want to control your monitoring volume directly from your standing desk. Check whether a simple passive controller will connect to your existing equipment.
You want to listen to your piano recording in mono as well, or switch between pairs of speakers. Check which of these features each model offers.
You record pianists and may want to use headphones or a separate cue mix during sessions. In that case, your needs may go beyond controlling the volume through your speakers.
Start with where you’ll place the controls and the signal path you already use. Add only the listening or recording features you genuinely need while mixing or recording.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Controls within easy reach | Check the position from both sitting and standing, and make sure the cables have enough slack when you adjust the desk height. | If I want to adjust the volume directly while mixing, without reaching for my interface, easy access is my priority. Around 33% of consumers put this first. |
| Mono and speaker pairs | Check whether you want to switch to mono and how many stereo outputs you actually need. | If I want to check my piano mix in mono or switch between the speakers I have, I look for those features on the unit. Around 25% of consumers consider this their main priority. |
| Compatibility with your equipment | Note the outputs on your interface, the inputs on your active speakers and the connectors you need. | I want the controller to fit between my existing interface and speakers, without making assumptions about the signal path based on the model name alone. Around 25% of consumers give connection compatibility top priority. |
| Headphones and communication | Check how many headphone outputs you need and whether cue mixing or talkback should be part of your session. | If I need separate monitoring options or communication while recording piano, I compare those features with what my interface already does. Around 17% of consumers prioritise recording support. |
A monitor controller doesn’t automatically handle monitoring in the same way as a recording interface. Mackie, for example, states that the Big Knob Passive doesn’t have a USB interface, while the Big Knob Studio combines monitor control with a recording interface.
Decide separately which device will record the piano and which will control monitoring only.
If you also need recording features, you may need a separate interface if your chosen controller doesn’t provide them.
Different versions in the same product range may have different connections. Palmer specifies RCA connections for the MONICON S G2 and balanced XLR/TRS combo inputs for the MONICON M G2.
Before choosing a model, write down the full signal path and connectors for your interface, controller and speakers.
Different connections may mean you need different cables too.
The TC Electronic MONITOR PILOT has a control unit and a separate connection box. This design doesn’t automatically mean that both parts will suit your workspace.
Check that the controls are easy to reach and the cables have enough slack across the desk’s full height range.
You may need to adjust the positioning or cable routing to make room for both parts and their cables.
The Big Knob Passive is designed for switching between two sources and two pairs of monitors; the Big Knob Studio adds recording and session features.
The passive MONICON M G2 is designed for one stereo source and one stereo monitor route; the MONICON S G2 uses RCA connections.
The Nero is designed for a more extensive studio set-up, with multiple speaker, subwoofer and headphone routes.
The MONITOR PILOT combines a compact desktop control unit with a separate connection box.
Radial says the passive SAT-2 is designed to sit between an interface and one pair of active speakers.
No, you don’t necessarily need a separate monitor controller if your existing volume control is easy to reach and you don’t need extra monitoring routes. A controller may be useful if you want direct volume control, a mono switch or the ability to switch between sources and speakers.
First, check that the connections on your interface, controller and active speakers are compatible. Radial’s SAT-2 manual advises switching off the audio system and turning the levels down before connecting cables. Also check that the cables won’t become taut when you adjust the desk.
Follow the manual for your specific model. Mackie’s Big Knob Passive manual says to clean it with a dry cloth; don’t assume the same instructions apply to another model without checking.
When you buy online from a business, you’re often entitled to a 14-day cooling-off period, subject to exceptions, according to the Rijksoverheid. Products are also protected by statutory rights if they don’t meet the standards you’re entitled to expect; there’s no fixed statutory warranty period in the Netherlands. If there’s a problem, contact the seller.
No, a CE mark isn’t a quality seal or a sound test. Business.gov.nl explains that the mark relates to applicable EU product rules and says nothing about a product’s overall quality or safety.