Who might need a monitor controller?

Piano mixer with one pair of monitors

You mainly want an easy-to-reach volume knob and quick access to mono, dim or mute. Sound On Sound explains that an audio interface and DAW can take over some of the functions of a dedicated controller, so first check what your existing equipment can already do.

Piano mixer comparing different listening setups

You want to check your mix through different sources or pairs of speakers. Mackie and ESI specify models with two stereo sources and two stereo outputs; check that each model’s connections are compatible with your equipment.

Piano mixer who also listens privately

You want to switch between speakers and headphones at the same workstation. ESI states that the MoCo doesn’t have a headphone amplifier; Drawmer and PreSonus describe headphone features on specific models.

What should you look for?

Start by checking which controls your audio interface already offers. Then decide whether you need physical controls, extra listening options or a headphone output.

What to consider What to look for when buying Who is this important for?
Direct control Check whether your interface already offers volume control and the mono, dim and mute functions you need. If I want to adjust the level or check my mix quickly while mixing, I don’t need to add another unit if my interface already does the job conveniently. Around 36% of consumers make direct control their top buying priority.
Switching between listening options Count sources and pairs of speakers separately, and check how the outputs are selected. If I want to compare piano mixes through different sources or pairs of speakers, the controller needs to connect to and switch between those options separately. Around 29% of consumers prioritise switching between sources or pairs of speakers.
Headphone output Check whether there’s a headphone output and whether its level can be adjusted separately. If I want to listen privately at the same workstation, I need a suitable headphone output and want to know how it’s controlled. Around 21% of consumers say private listening is their top buying priority.
Connections and desk space Compare the inputs, outputs and signal formats with your equipment; allow space for the unit and its cables. If I have a small workspace, I want to know whether the controller will fit and connect to my interface and speakers. Around 14% of consumers make connections and desk fit their top buying priority.

Monitor controller buying pitfalls

  • Mistaking a passive speaker controller for a headphone amplifier

    ESI states that you can’t connect headphones to the MoCo, as this passive model doesn’t have a built-in headphone amplifier.

    If you want to listen privately, check whether the exact model has a headphone output and the level controls you need.

    You may otherwise need a separate solution for headphone listening.

  • Mistaking one stereo output for switchable outputs for two pairs of speakers

    Palmer specifies one stereo output for the MONICON M G2, while Mackie specifies two monitor pairs for the Big Knob Passive.

    Count the speaker outputs you can use independently before choosing a model.

    If you want to switch between pairs of speakers later, you may need extra switching equipment.

  • Assuming a connection or USB-C port has a different function

    ESI states that the MoCo doesn’t convert an unbalanced signal to a balanced one. PreSonus says that the MicroStation BT’s USB-C connection is for power only and doesn’t carry USB audio.

    Check the complete signal path and the function of every connection on the exact model.

  • Prioritising extra features over available desk and cable space

    The stated dimensions of a unit don’t automatically include the space taken up by connected plugs and cables.

    Measure the space where you plan to put the unit, allowing for the connections and cables.

Brands worth comparing

Mackie

The Big Knob Passive is designed for anyone who wants to control two sources and two pairs of speakers.

  • Mackie specifies two source selections and two monitor pairs, with mono, mute and dim.
  • Check that these switching options suit your connections and desk setup.

Palmer

The MONICON M G2 is designed for a single, compact stereo listening setup; the MONICON L G2 offers different connections and listening options.

  • Palmer specifies mono, dim and mute for the M G2, along with one stereo output.
  • According to its specified output configuration, the M G2 doesn’t switch between two pairs of speakers. Features of the L G2 don’t automatically apply to the M G2.

ESI

The MoCo is a passive controller for two stereo sources and two stereo outputs with different connectors.

  • ESI specifies mono, mute and left-right reversal.
  • ESI states that the MoCo doesn’t provide headphone amplification or convert an unbalanced signal to a balanced one.

Drawmer

According to Drawmer, the CMC2 combines two pairs of speakers with a subwoofer output and a separately controlled headphone output.

  • Drawmer specifies mono, phase reverse, dim and mute. The stated footprint is 18 × 16 cm.
  • As well as the unit itself, allow space for connected cables and plugs.

PreSonus

The MicroStation BT is designed for an existing set of active speakers, with optional headphone, Bluetooth or subwoofer connectivity.

  • PreSonus specifies a headphone/aux output and subwoofer bypass.
  • PreSonus states that USB-C provides power only; it doesn’t carry USB audio, so it can’t replace an audio interface.

Monitor controllers at Joybuy

Related products will be available soon.

Frequently asked questions

Do I need a monitor controller if my audio interface already has a volume knob?

Not necessarily. If you use one pair of speakers and your interface and software already provide the controls and mix checks you need, you can keep using them. Sound On Sound explains that a DAW and audio interface can perform similar tasks; a dedicated controller is mainly useful if you’re missing physical controls or extra listening options.

How can I check whether a monitor controller’s connections are compatible?

Compare the outputs on your audio interface with the inputs on the exact controller model, then compare the controller’s outputs with your speakers. Check the signal format too: ESI states that the MoCo doesn’t convert an unbalanced signal to a balanced one.

Can I connect headphones to any monitor controller?

No, it depends on the model. ESI states that the passive MoCo doesn’t have a built-in headphone amplifier. Check whether the model you’re considering has a suitable output and the level controls you need.

Can I use the MicroStation BT as an audio interface for piano recordings via USB-C?

No. According to PreSonus’s connection guide, the MicroStation BT’s USB-C connection provides power only and the device doesn’t appear as a USB audio device.

What warranty and cooling-off period apply to purchases in the Netherlands?

According to the Dutch government, there’s no fixed period for the statutory guarantee in the Netherlands: it depends on what you can reasonably expect from the product with normal use. For many purchases made remotely from a business, you have 14 days to change your mind; check the terms that apply to your specific order.