Who is a monitor controller for?

Editor working with multi-miked percussion

Wants to listen in mono while editing to check whether combined percussion tracks lose definition. Shure explains how phase issues can occur in multi-microphone recordings. The mono function helps you hear them, but it won’t correct the recording.

Editor with one stereo pair and limited space

Needs an easy-to-reach volume control, with only the controls and connections that suit their existing desk and speakers. Compare the dimensions and connections of the exact model you’re considering.

Editor with a separate listening setup

Wants to listen through headphones during quiet sessions, or genuinely switches between speaker pairs or a subwoofer. The available outputs and switches vary by model.

What to consider when editing percussion

The percentages show which buying considerations matter most to consumers editing percussion at a small desk.

Consideration What should you check? Who is this important to?
Checking percussion in mono Check whether the exact model has a mono function and whether it works with the listening setup you use. When I edit percussion recorded with multiple microphones, I want to hear in mono whether the combined tracks lose definition. Around 36% of consumers prioritise checking percussion in mono.
Controls and desk space Measure the space, allowing room for plugs; also compare the connections and the mono, dim and mute functions you need. At a small desk, I want direct control over the volume without losing space to functions I don’t use. Around 29% of consumers prioritise a suitable size and easy-to-reach controls.
Listening through headphones Check whether the model has a headphone output and which control switches off the speakers without muting every output. When I want to listen quietly, my headphone signal path needs to keep working while the speakers are off. Around 21% of consumers prioritise listening separately.
Switching between listening setups List your sources, speaker pairs and any subwoofer, then check which switching options the model offers. When I genuinely use multiple listening setups, I want to be able to switch between them centrally. Around 14% of consumers prioritise extra monitoring options.

Pitfalls to avoid when choosing

  • Assuming mute only switches off the speakers

    According to PreSonus, the Mute function on the PreSonus MicroStation BT mutes all outputs. This is different from Main Out On/Off, which is listed as a separate function.

    Check which outputs remain active on each model when you want to listen through headphones.

  • Choosing a compact controller without comparing its connections

    The Palmer MONICON S G2 uses RCA connections; the MONICON M G2 has different connection options. A suitable size doesn’t automatically mean it will connect to your existing equipment.

    Compare the connections on your interface, controller and speakers before choosing a model.

  • Confusing USB-C power with USB audio

    PreSonus states that the USB-C connection on the MicroStation BT is for power only; it won’t make the device appear as an audio interface on your computer.

    Keep or choose a separate audio interface for recording and playback.

  • Choosing extra listening options without allowing for the space they take up

    The Audient Nero has specified dimensions of 255 × 75 × 155 mm and uses an external 12 V power supply. Allow for the unit, power supply and connected cables when deciding where to put it.

    Measure the available space, including room for plugs, and think in advance about which listening options you’ll actually use.

Brands to consider

Palmer

The MONICON S G2 and M G2 are compact passive options for a single stereo signal path; their controls and connections differ by model.

  • According to Palmer, the S G2 has a mono button, RCA connections and dimensions of 86 × 39 × 66 mm. The M G2 also has separate mono, dim and mute buttons, as well as different connection options.
  • Palmer lists the M G2 as measuring 160 × 62 × 106 mm. Check both the functions you need and the space available.

Mackie

The Big Knob Passive is designed for passive control, with source and speaker switching.

  • Mackie specifies two sources, two monitor pairs and mono, dim and mute functions for this model.
  • The Big Knob Passive and Big Knob Studio models are different versions. Check the connections and functions available on the exact model.

PreSonus

The MicroStation BT combines a stereo speaker signal path with headphone and subwoofer controls.

  • PreSonus lists Main Out On/Off and Sub Bypass as separate functions.
  • According to PreSonus, USB-C is for power only; the connection doesn’t replace a USB audio interface.

Audient

The Nero is designed for a setup with multiple speaker and headphone signal paths.

  • Audient specifies three stereo speaker outputs, an assignable subwoofer and four headphone outputs.
  • The specified dimensions are 255 × 75 × 155 mm, and the Nero uses an external 12 V power supply. Allow for the space needed by the unit and its cables.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a mono button fix phase issues in my percussion recording?

No, a mono button won’t correct phase issues. Listening in mono can reveal when combined microphone tracks lose definition; assess and correct the tracks in your recording or editing process.

How do I connect a passive monitor controller?

First compare the outputs on your interface with the controller’s inputs, then compare the controller’s outputs with your speakers. According to Palmer, the MONICON M G2 has stereo connection options via XLR/TRS combo or 3.5 mm, while the S G2 uses RCA. Check the connections on the version you choose before buying cables.

Can I use the PreSonus MicroStation BT as an audio interface via USB-C?

No. According to PreSonus, the USB-C connection on the MicroStation BT is for power only. Use a suitable connection and interface for audio.

How do I look after a monitor controller on my desk?

Follow the manual for the exact model. Mackie advises keeping the Big Knob Passive away from water and cleaning it only with a dry cloth.

What warranty applies when buying as a consumer in the Netherlands?

In the Netherlands, you’re entitled to a product that works as it should, and you can contact the seller if there’s a fault, according to the Dutch government. There’s no fixed statutory warranty period; a manufacturer’s or seller’s warranty is in addition to your statutory rights.

Does a monitor controller need a CE mark in the Netherlands?

A CE mark is only compulsory if the specific product falls under harmonised EU rules that require it, according to the European Commission. Check the documentation for the exact model and version, including any power supply; the product category alone doesn’t confirm that a specific listing meets the rules.