Who can benefit from a monitor controller?

Mixer who wants to make quick adjustments

You mix in a bright workspace and want to control the volume, mono or mute without first using your DAW screen. A physical knob can reduce the need to interact with the screen, but it won’t tell you how easy the controls are to see in the light from your window.

Mixer with multiple speaker routes

You want to compare an electronic mix through different pairs of monitors or separate listening routes. Check which outputs and controls you’ll need.

Producer with a 2.1 setup

You use a subwoofer and want to be able to switch it off while your main monitors keep playing. Check that the sub output and connections suit your setup.

What should you look for when choosing one?

What to consider What should you check? Who is this important for?
Immediate control Check the layout of the controls, whether you can reach them from your mixing position, and the mono, dim and mute functions on the exact model. If you want to adjust the volume or switch to mono quickly while mixing without going to your DAW, you’ll want to be able to reach the controls from where you’re sitting. Around 36% of consumers prioritise immediate control.
Comparing monitors Count source inputs and speaker outputs separately; check for mono, any level controls and the connectors you need. If you want to switch between connected pairs of monitors, check which routes are available and what controls each output has. Around 29% of consumers prioritise this comparison.
Managing a subwoofer Check the type of sub output and whether you can switch the sub off separately while the main monitors keep playing. With a 2.1 setup, you’ll want to listen with and without the subwoofer without muting the main monitors. Around 21% of consumers prioritise subwoofer control.
Headphones and recording Check whether it has a headphone output with suitable amplification, whether USB carries audio and how the unit is powered. If you also need a headphone route or recording interface, check which functions are already covered by your existing equipment. Around 14% of consumers put these extra features at the top of their list.

Common mistakes when choosing

  • Assuming a volume knob means you have a complete headphone or recording solution

    A passive controller doesn’t automatically include a headphone amplifier or USB recording function. ESI confirms that the MoCo has no built-in headphone amplifier; PreSonus states that the USB-C connection on the MicroStation BT is for power only.

    Make a note of the features your audio interface already provides, and check what each connection does on the exact model.

    If the controller doesn’t have the feature you need, you may also need a suitable headphone amplifier or audio interface.

  • Assuming every subwoofer output works in the same way

    A sub output and a switchable subwoofer route aren’t the same thing. PreSonus describes Sub Bypass on the MicroStation BT, while Audient describes the Nero’s assignable sub output.

    Check how you want to switch the sub and which outputs your subwoofer and main monitors need.

  • Buying more connections when the light from the window is still a problem

    Extra monitor routes won’t reduce glare on your DAW screen. For distracting daylight, Arboportaal recommends considering your workspace setup and using suitable blinds.

    Check that you can reach the physical controls from your mixing position, and deal with distracting light separately.

Brands to compare

Mackie

The Big Knob Passive is designed for straightforward source and monitor switching; the Big Knob Studio adds recording and headphone features.

  • Mackie lists two sources, two pairs of monitors, and mono, mute and dim controls for the Big Knob Passive.
  • The extra recording and headphone features are on the Studio, not the Passive. These are Mackie’s specifications, not the result of an independent listening test.

Audient

The Nero is designed for a workspace with multiple sources, pairs of monitors, and subwoofer and headphone routes.

  • Audient lists three stereo speaker outputs, an assignable sub output and four headphone outputs.
  • The more extensive routing is most useful if you’ll use those connections; the specifications don’t tell you how easy the controls are to see next to a bright window.

PreSonus

The MicroStation BT is designed for a compact setup with one pair of main monitors, a switchable subwoofer and, optionally, a Bluetooth playback source.

  • PreSonus lists Sub Bypass and outputs for the main monitors.
  • According to PreSonus, the USB-C connection is for power only and is not a USB audio interface.

ESI

The MoCo is a passive volume controller with a choice of two stereo inputs and two stereo outputs.

  • ESI lists mono, mute and left-right swapping.
  • ESI confirms that the MoCo has no built-in headphone amplifier. Also check whether you need balanced or unbalanced connections for each route.

Palmer

The MONICON XL is designed for more advanced studio monitoring, with multiple speaker outputs and level control for each output.

  • Palmer lists three speaker outputs, two headphone outputs and a correlation meter on the MONICON XL.
  • These details apply to the MONICON XL and aren’t an independent assessment of mixing results or of other Palmer models.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a monitor controller help with glare from a window?

Not on its own. A physical knob can reduce the need to use your screen, but bright sunlight can make a display harder to read. For distracting reflections, Arboportaal recommends considering the position of your workspace in relation to the window and using suitable blinds.

How do you connect a passive monitor controller?

Place the controller in the appropriate part of the audio chain, between the output of your source or audio interface and the input of your monitors. First check the connectors and whether the chosen route is balanced or unbalanced: ESI states that the MoCo doesn’t convert an unbalanced signal into a balanced one.

Is USB-C on the PreSonus MicroStation BT an audio connection?

No. According to PreSonus, this USB-C connection is for power only; the computer won’t recognise the unit as an audio device.

What can you do if a product develops a fault after a consumer purchase in the Netherlands?

For a faulty or non-conforming product, the seller is responsible for the statutory guarantee, according to the ACM. A commercial guarantee from the seller or manufacturer doesn’t replace that responsibility; the appropriate solution depends on the circumstances.

Is there a cooling-off period for a monitor controller bought online?

For a distance purchase by a consumer in the Netherlands, the ACM says there is usually a statutory cooling-off period of up to 14 days after delivery. There are exceptions, so check the seller’s relevant information before buying.