Who can benefit from a monitor controller?

Loop maker with one pair of speakers

You want to adjust your listening volume directly and check whether your audio interface’s volume control is already easy to reach.

Student who often uses headphones

You switch between speakers and headphones, for example to keep the speakers quiet in shared accommodation. Check that the model has the right output and controls.

Creator with multiple listening sources

You want to listen to loops from more than one source or switch between pairs of speakers. The number and type of connections determine whether a controller will suit your setup.

What should you look for when choosing one?

What to consider What should you check? Who is this important for?
Direct volume control Check whether your audio interface already has an easy-to-reach volume control, and whether the controller connects to your analogue source and speakers. If I use one pair of speakers, I want to adjust the volume easily without adding an unnecessary device. Around 33% of consumers consider direct volume control their top priority.
Headphone connection Check whether the model has a headphone output and how to mute the speakers. Keep the listening volume at a sensible level when using headphones, too. If I want to listen to my loops in shared accommodation without turning on the speakers, I need a suitable headphone connection. Around 27% of consumers give this top priority.
Mono and speaker pairs Count the pairs of speakers you actually use and check whether the model offers mono and the output switching you need. If I want to check loops in mono or switch between pairs of speakers, I look for those exact features. Around 20% of consumers prioritise these listening options.
Extra sources and recording features Compare the source inputs and check whether USB is for audio or power only. Separately, consider whether you need a recording interface. If I also want to connect a phone or another source, or I’m looking for a recording interface, I check the features of each model. Around 20% of consumers give extra sources or recording features top priority.

Common mistakes

  • Buying a second volume control when your interface already does the job

    With one source and one pair of speakers, your audio interface may already provide all the volume control you need.

    First, check your current connections and make sure the volume control is easy to reach.

    An extra device can also mean more cables in your setup.

  • Mistaking a passive model for a headphone controller

    According to Mackie’s model comparison, the Mackie Big Knob Passive does not have a headphone output. Other models in the same range may have different features.

    Check the connections and features of the exact model, not just the brand or range name.

  • Confusing USB power or Bluetooth with a USB audio interface

    According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only. The Mackie Big Knob Studio is a separate model that the manufacturer also describes as a recording interface.

    Check explicitly whether the model has USB audio inputs and outputs before assuming it can replace your audio interface.

Brands to consider

Mackie

The Big Knob Passive is an analogue controller for switching between sources and pairs of speakers. The Big Knob Studio is a separate model with USB recording features and two headphone outputs.

  • Mackie lists mono, mute and dim functions for the Big Knob Passive.
  • According to Mackie’s model comparison, the Big Knob Passive has no headphone output. Don’t assume it has features found on the Studio.

PreSonus

The MicroStation BT combines an analogue input with Bluetooth and a headphone/aux output. The Monitor Station V2 is a separate model for more sources and listening outputs.

  • PreSonus lists a switchable subwoofer output for the MicroStation BT.
  • According to PreSonus, the MicroStation BT’s USB-C connection is for power only, not for use as an audio interface.

Behringer

The MONITOR1 is a passive volume controller for one analogue stereo speaker route.

  • Behringer lists mono and mute functions; the inputs accept XLR/TRS or 3.5 mm, among other options.
  • According to the connection instructions, you shouldn’t use the alternative input types at the same time. Check which type of cable you need.

Palmer

The MONICON M G2 is a compact passive controller for one stereo route.

  • Palmer lists mono, dim and mute functions for the M G2.
  • Bluetooth and a headphone output are features of the separate MONICON L G2, not the M G2.

Audient

The NERO is designed for a setup where multiple speaker and headphone routes are actually used.

  • Audient lists three stereo speaker outputs and four headphone outputs.
  • Assess the extra connections based on your own setup; the specifications listed do not, by themselves, say anything about comparative sound quality.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Where do you connect a basic monitor controller?

In an analogue setup, you’ll usually place the controller between the output of your audio interface or mixer and your speakers. First, compare the inputs, outputs and cable connectors on both sides. With the Behringer MONITOR1, you shouldn’t use the alternative input types at the same time.

Can you use the PreSonus MicroStation BT as a USB audio interface?

No. According to PreSonus, the MicroStation BT’s USB-C connection is for power only. For computer audio, use a suitable audio source or audio interface.

What should you check after installation?

Start with the listening volume turned down, then test mute, the speaker output and the headphone connection separately, if you use one. It’s also sensible to keep the listening volume at a safe level when using headphones: sound that’s too loud in the ear canal can damage your hearing.

What are your rights when buying a monitor controller online?

According to the Rijksoverheid, consumers have a 14-day cooling-off period for many online purchases; check the applicable exceptions and returns information. ACM ConsuWijzer explains that you’re entitled to a product that, under normal use, meets what you could reasonably expect from it. This statutory right is not the same as a voluntary manufacturer’s warranty.