For a jazz demo with few spare sockets, a passive monitor controller may be all you need if you mainly want to control speaker volume and listen in mono, provided its connections are compatible with your audio interface and monitors. Mackie and Palmer describe models that don’t need their own power supply. Choose a controller with powered headphone, cue or talkback features only if you need those connections and have power available. Count your sources, speaker pairs and headphone listeners in advance.
Who would benefit from a monitor controller?
Mixer with limited sockets
You already have an audio interface and active monitors, but want direct volume control without automatically adding another device that needs power. First, check which controls and connections your existing equipment already offers.
Jazz mixer who checks in mono
You want to switch to mono quickly while listening back, with an easy-to-reach button alongside the volume control and, perhaps, mute.
Recording engineer with a separate listener
You’re making a demo with a musician who needs their own headphone or cue feed. Check which route is available and how it’s powered.
What should you look for in a monitor controller when sockets are limited?
First, check what your current interface can already do. Then decide which extra hands-on controls or listening routes you actually need.
| What to consider |
What to check |
Who is it for? |
| No extra power supply |
Check whether the exact model needs a power supply and which features work without one. Palmer states that the MONICON S G2 doesn’t need a power supply. |
If I already have an interface and active monitors, I don’t want to use another socket for features I don’t need. Around 31% of consumers prioritise avoiding an extra power supply. |
| Volume and mono |
Compare the physical controls with those already available on your interface. Mackie specifies mono, mute and dim for the Big Knob Passive. |
For a jazz mix, I want to adjust the volume quickly and listen in mono. Around 25% of consumers prioritise direct volume and mono control. |
| Compatible connections |
Note the connections and signal types used by your interface and monitors. ESI states that MoCo doesn’t convert unbalanced signals to balanced ones. |
When connecting my existing interface and monitors, I want the whole signal chain to be compatible. An estimated 25% of consumers prioritise suitable connections and signal paths. |
| Sources and monitor pairs |
Count the stereo sources and speaker pairs you actually use. Mackie specifies two sources and two monitor pairs for the Big Knob Passive. |
If I want to compare sources or speaker pairs, I need the right switching options. Around 13% of consumers cite this switching as their main reason to buy. |
| Headphone or cue feed |
Check the number of headphone outputs, level controls and the power supply required. ESI states that MoCo doesn’t have a built-in headphone amplifier. |
If a musician wants to listen separately, I want to know which headphone or cue feed is available. Around 6% of consumers prioritise a separate listening route. |
Buying pitfalls
-
Assuming a passive signal path means the whole unit needs no power
The Palmer MONICON L G2 uses power for features including its headphone amplifier, even though Palmer describes the model as active/passive.
Check the power requirements for the exact model and every feature you plan to use.
-
Confusing different audio connections with signal conversion
ESI states that MoCo doesn’t convert an unbalanced signal to a balanced one.
Check the complete route from your interface, through the controller, to your monitors, including connectors and signal types.
-
Mistaking a speaker output for a headphone output
According to ESI, MoCo doesn’t have a built-in headphone amplifier, so you can’t connect headphones directly to it.
For a musician’s mix, check whether there’s a suitable headphone or cue output and how it’s powered.
-
Buying a controller for controls you already have
Bax Music’s Dutch buying guide explains that volume controls and listening routes depend on your existing setup.
First, check which controls and routes your current audio interface already offers.
Brands to consider
Mackie
The Big Knob Passive is designed for passive control of two sources and two monitor pairs. The Big Knob Studio is a separate model for anyone who also needs recording, cue and talkback features.
- Mackie specifies mono, mute and dim for the Big Knob Passive.
- The USB recording interface and headphone outputs are features of the Big Knob Studio, not the Big Knob Passive.
Palmer
The MONICON S G2 is a compact RCA volume controller with mono control. The M G2 and L G2 offer different analogue connections or more extensive routing options.
- Palmer says the MONICON S G2 doesn’t need a power supply; the M G2 offers mono, dim and mute.
- The S G2’s RCA connection won’t necessarily suit every interface. The L G2 uses power for features including its headphone amplifier.
ESI
MoCo is designed for passive volume control with two sources and two outputs, provided its analogue connections suit your setup.
- ESI specifies mono, mute and channel reversal.
- According to ESI, MoCo doesn’t convert unbalanced signals to balanced ones and doesn’t include a headphone amplifier.
Behringer
MONITOR1 is designed to control one stereo speaker route. According to its specifications, STUDIO M also lets you switch between two sources and two speaker routes.
- Behringer specifies mono and mute for MONITOR1, plus dim and A/B switching for STUDIO M.
- According to Behringer, the alternative connectors on the same side of MONITOR1 must not be used at the same time.
Audient
Nero is worth considering when multiple speaker, subwoofer and headphone routes matter more than simply adding another volume control.
- Audient specifies three stereo speaker routes and four headphone outputs.
- Audient lists a 12VDC 2 A adapter for Nero. The manufacturer’s claim about the accuracy of its volume control hasn’t been independently verified here.
Joybuy products for this setup
Related products coming soon.
Frequently asked questions
Does a passive monitor controller replace my audio interface?
Not if you use your interface for recording. Mackie distinguishes the Big Knob Passive from the Big Knob Studio, which has USB recording features. Also check whether your interface already offers the monitoring controls you need.
How do you connect and maintain a basic monitor controller?
Place a compatible model in the analogue signal path between the output of your source or interface and the input of your active monitors. Check the connectors and signal types on all your equipment first. Mackie recommends cleaning the Big Knob Passive with a dry cloth only.
Can you connect headphones to the ESI MoCo?
No. According to ESI, MoCo doesn’t have a built-in headphone amplifier and its stereo outputs are intended for monitors. Use a suitable headphone output you already have, or choose a model with a dedicated headphone output.
What are the cancellation period and guarantee for an online purchase in the Netherlands?
According to the Dutch government, distance purchases by consumers usually come with a 14-day cancellation period, although exceptions apply. ACM ConsuWijzer explains that your statutory guarantee is separate from a manufacturer’s or seller’s guarantee. If a product breaks during normal use sooner than you could reasonably expect, the seller is responsible for providing an appropriate solution at no extra cost.
Does a monitor controller sold in the Netherlands need a CE mark?
That depends on the product rules that apply and the specifications of the exact device. Business.gov.nl explains that CE marking is mandatory only for product groups covered by CE rules. The relevant safety rules apply to electrical and electronic equipment; EMC rules and, for devices with radio functions, specific regulations may also be relevant. Don’t assume that a particular version needs a specific mark just because it’s described as passive.