Who is a monitor controller for?

Mixer with limited power sockets

You already have an audio source and want to control your monitoring volume without plugging the controller into the mains as well. Passive models offer different numbers of connections and control features; Mackie, Palmer and Behringer are among the brands that describe models of this kind.

Mixer who checks in mono

You want to switch quickly between stereo and mono while working on the score, and be able to mute your speakers. Check each model to see whether it has mono and mute, and whether you also need dim.

Mixer who needs extra monitoring routes

You use more than one source or pair of speakers, or need a separate headphone or subwoofer route. These requirements call for the right connections and may also mean you need a powered controller.

What should you look for when choosing one?

First count the audio sources and speaker pairs you actually use. Then check the controls, connections and power requirements you need.

What to consider What to look for when buying Who is this important for?
Control without an extra power socket Check whether the controller is passive and whether its inputs and outputs are compatible with your existing audio interface and speakers. If I have few spare power sockets, I want to control the speaker volume without powering the controller separately. Around 36% of consumers put this need first.
Mono, mute and dim Check which controls the exact model has; not every passive model offers the same features. When mixing, I want to be able to check in mono quickly and mute the speakers. Around 29% of consumers are mainly looking for this kind of control.
Multiple sources or speaker pairs Count the stereo sources and speaker pairs you want to switch between, and check the connection types. If I compare two audio sources or pairs of speakers, I need enough compatible inputs and outputs. Switching between them is the main requirement for around 21% of consumers.
Headphones or subwoofer Check separately for a headphone output, a subwoofer route and a suitable power supply. If I need a headphone or subwoofer route as well as my main speakers, the model must genuinely offer that feature. Around 14% of consumers prioritise this extra monitoring route.

Common buying mistakes

  • Assuming ‘passive’ means your entire monitoring setup needs no power

    ‘Passive’ applies to the controller, not to the connected audio interface, speakers or other equipment.

    Before choosing, map out the signal and power routes in your existing setup.

  • Confusing a Big Knob Passive with a Big Knob Studio

    Mackie’s model comparison does not list USB audio or a headphone output for the Big Knob Passive.

    Check the full model name and the inputs and outputs on the version you’re considering.

  • Counting outputs based on computer monitors

    A monitor controller’s outputs are designed for audio speakers; having two computer monitors doesn’t automatically mean you need two pairs of speakers.

    Count the stereo sources and speaker pairs you actually want to connect.

  • Confusing USB-C with computer audio

    PreSonus states that the MicroStation BT’s USB-C connection is for power only and doesn’t receive computer audio.

    Check the audio input and power connection separately for the exact model.

Brands to consider

Behringer

The passive MONITOR1 is designed for one stereo source and one pair of speakers, with mono and mute controls.

  • According to Behringer, the MONITOR1 has XLR/TRS combo inputs and XLR outputs.
  • The model has no dim button and doesn’t switch between two pairs of speakers. Behringer warns that the combo inputs and 3.5 mm input must not be used at the same time.

Palmer

The passive MONICON M G2 offers a single stereo route with mono, dim and mute controls.

  • Palmer specifies a balanced XLR/TRS or 3.5 mm input, and an XLR or 3.5 mm output.
  • The model doesn’t switch between two pairs of speakers, so choose connections that suit your setup.

Mackie

The passive Big Knob Passive is designed to switch between two stereo sources and two pairs of speakers.

  • Mackie lists mono, mute and dim controls.
  • Mackie’s model comparison doesn’t list USB audio or a headphone output for the Passive version. Don’t assume that features of the Big Knob Studio are included on this model.

ESI

The passive MoCo combines two stereo sources and two stereo outputs.

  • ESI describes a range of TRS, XLR, RCA and 3.5 mm connections.
  • According to ESI, the MoCo doesn’t convert unbalanced audio to balanced audio and has no built-in headphone amplifier.

PreSonus

The MicroStation BT is a powered option if Bluetooth, a headphone or aux route, or a subwoofer route suits your setup.

  • PreSonus specifies balanced TRS line connections and sub bypass, among other features.
  • PreSonus states that USB-C is for power only, not computer audio. Make sure you have a suitable power connection.

Heritage Audio

The passive Baby RAM is designed for two stereo sources and two pairs of speakers.

  • Heritage Audio lists balanced TRS connections, mono, dim and mute controls, and a 24-step volume control that requires no power.
  • Heritage Audio’s claims about transparency or stereo imaging are manufacturer claims, not the result of an independent comparison.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Can a passive monitor controller replace my audio interface?

No, not for recording or USB audio. Connect a suitable passive line controller to the existing signal path between your audio source and speakers. Mackie doesn’t list USB I/O for the Big Knob Passive; check the inputs and outputs on your own equipment, too.

How can I check a score in mono without changing my mix?

Use the mono button on a model that has one, then listen again in stereo. The button changes the monitoring route; if you hear a problem, investigate the mix itself.

Can the USB-C port on the PreSonus MicroStation BT receive computer audio?

No. PreSonus says the USB-C port is for power only and won’t appear as an audio device on your computer. Plan a separate audio connection and check where the USB power will come from.

Does my short film score need to be delivered at −23 LUFS?

Not because you’ve chosen a particular monitor controller. The European Broadcasting Union recommends −23 LUFS for programme audio normalisation, but explicitly says its supplement on cinematographic content isn’t production guidance for feature films. Before setting a target level for your short film, ask the client or screening platform for its specific delivery requirements.

Can I return a monitor controller bought online in the Netherlands?

According to the Dutch government, when you buy from a business remotely as a consumer, you’ll often have a 14-day cooling-off period. There are exceptions, and an online purchase from a private seller isn’t covered by the same rules. Check the specific seller’s terms and conditions.