Who is a monitor controller for?

Mixer with one pair of speakers

You mix using two computer screens and mainly want to adjust your monitor volume, mute it or check your mix in mono with ease. First, see what controls your audio interface already offers.

Mixer comparing pairs of speakers

You actually use two different pairs of studio speakers and want to switch between them, and possibly between audio sources too. Two computer screens do not count as two pairs of speakers.

Recording engineer with a musician on headphones

You mix or record the jazz demo while a musician needs their own monitor feed. Headphone outputs, source selection and, potentially, talkback are important factors to consider.

What should you look for when choosing one?

Start by checking which features your interface already has, then decide whether you need physical speaker switching or a separate headphone feed.

What to consider What should you check? Who is this important for?
Direct volume control Check whether your interface already offers this control and whether the controller has physical mute and mono buttons. If I want to adjust the volume, mute the speakers or listen in mono quickly while mixing, I want those controls close at hand. Around 36% of consumers give direct control top priority.
Comparing pairs of speakers Count your physical stereo speaker pairs and check the number of outputs and the level control for each output. If you actually use two pairs of speakers, you’ll want to switch between them while mixing. Around 29% of consumers put this comparison first.
Headphones and cue Check the number of headphone outputs, the source selection for each output and whether your interface provides the cue mix you need. If a musician needs to listen during recording, I want to know whether they’ll get a suitable monitor feed of their own. Around 21% of consumers put this need first.
Connections and expansion Map out the signal path and the connectors you need. If you’re considering a USB interface, also check whether it will replace your existing recording equipment. If you want to connect equipment already in your studio or use extra sources in future, you’ll need connections that suit your setup. Around 14% of consumers make this their most important consideration.

Common purchasing mistakes

  • Confusing two computer screens with two monitor pairs

    A/B outputs switch between speakers; they do not control computer screens.

    Count your physical pairs of speakers and first check what your audio interface can already do.

    An unnecessarily feature-rich controller may mean extra cabling.

  • Assuming a passive A/B controller can also provide headphones for a musician

    The Mackie Big Knob Passive described here has no headphone outputs, while the PreSonus Monitor Station V2 specifies separate headphone and cue options.

    Before buying, work out how many people need to listen at the same time and which cue source is available.

    A separate headphone feed may require additional equipment and cabling.

  • Choosing a USB interface without considering your existing recording setup

    The Mackie Big Knob Studio combines monitor control with USB recording; a passive controller serves a different purpose.

    Decide separately whether you only want to change your monitor controls or also replace your current audio interface.

    Overlapping recording equipment can mean extra setup work.

Relevant brands to consider

Mackie

The Big Knob Passive is designed for physical source and speaker selection; the Big Knob Studio combines monitor control with a USB recording interface.

  • Mackie says the Passive switches between two sources and two pairs of speakers, and has mono, mute and dim functions.
  • The Passive has no headphone outputs. Mackie says the Studio has two speaker pairs, a 2×2 USB interface, two headphone outputs and talkback. The specifications alone say nothing about sound quality.

Heritage Audio

The Baby RAM is a passive option for two stereo sources and two pairs of stereo speakers.

  • The manufacturer specifies a 24-step volume control, plus mono, dim and mute functions.
  • Headphone and cue routing are not listed among the described features. The manufacturer's claims about transparency and stereo precision are not independent measurements.

PreSonus

The Monitor Station V2 is designed for sessions that need multiple pairs of speakers and headphone listeners.

  • PreSonus specifies three stereo speaker outputs and four headphone outputs with Main/Cue selection and talkback.
  • Check whether your existing interface provides the separate cue source you need; the model specifications alone do not confirm that it will suit your entire studio setup.

Audient

According to Audient, the Nero offers extensive routing for speakers, headphones and talkback.

  • Audient specifies three stereo speaker outputs, an assignable sub output and four headphone outputs.
  • If you’re the only listener and use one pair of speakers, the extra routing may be more than you need.

Palmer

The MONICON L G2 combines source selection with two stereo outputs and an additional mono output.

  • Palmer specifies balanced XLR/TRS, AUX and Bluetooth inputs, two stereo outputs and an additional mono output.
  • According to Palmer, the integrated power supply powers Bluetooth and the headphone amplifier, among other things. Check the power supply and connections on the version you’re considering. The manufacturer's performance claims are not independent measurements.

Radial Engineering

The SAT-2 is a passive volume controller for use between an interface and one pair of active speakers.

  • Radial specifies volume, mono, mute and adjustable dim controls.
  • In the setup described, the SAT-2 does not switch between two pairs of speakers. Claims about transparency are not independent measurements.

Monitor controllers at Joybuy

Related products will be available soon.

Frequently asked questions

Do two computer screens mean I need two monitor outputs?

No, not for the screens: the outputs on an audio monitor controller are designed for audio speakers. Count your physical pairs of stereo speakers and your sources; if you use one pair, the controls on your existing audio interface may be enough.

Where do I connect a passive monitor controller?

In the SAT-2 setup described by Radial, the analogue stereo signal runs from the audio interface, through the controller and to one pair of active speakers. Before buying, check that the connectors and your existing headphone setup suit this signal path.

Can a controller create a separate headphone mix for a musician on its own?

Not without a suitable source-routing setup. According to PreSonus, each headphone output on the Monitor Station V2 can select a Main or Cue source. Also check that your recording equipment provides the separate cue source you need.

How can I use my monitoring setup safely?

Start with the monitor volume low and check your source and speaker selection before turning it up. The Mackie manual warns that very high sound levels can cause permanent hearing loss and recommends cleaning the device with a dry cloth only. This is the manufacturer's advice, not a legal volume limit for mixing at home.