Evening mixer using headphones
You often work without speakers and want to check whether your audio interface already provides a suitable headphone path, or whether the controller needs to add this function.
If you mainly mix quietly on headphones, only choose a controller with a suitable headphone path if your audio interface doesn’t already provide one. For a single pair of speakers, a simpler model with easily accessible mute, dim and mono controls may be enough. Check the connections, and bear in mind that a subwoofer output or volume control won’t eliminate the effect of your room on how you judge bass.
You often work without speakers and want to check whether your audio interface already provides a suitable headphone path, or whether the controller needs to add this function.
You want to mute quickly from your desk, turn down the speaker volume and listen to your mix in mono, without paying for listening routes you won’t use.
You switch between speakers or use a subwoofer and want to check the bass, while bearing in mind how your room affects what you hear.
First, check how you can listen quietly on headphones and which functions your interface already offers. Then choose the speaker controls and extra routes that suit your actual set-up.
| Key consideration | What to check before buying | Who is this important for? |
|---|---|---|
| Quiet listening on headphones | Check whether the exact model has a headphone output, how you control the level and whether your interface already provides the route you need. | If I mix when speakers might disturb other people, I want to know where my headphone signal comes from and how to control it. Around 29% of consumers put the headphone route first. |
| Direct speaker control | Check which functions your interface already offers and whether the controller model has mute and dim controls. | If I want to turn down or mute my monitors quickly from my desk, I look for controls within easy reach. Around 29% of consumers prioritise direct control of speaker volume. |
| Mono and bass checks | Check whether the model has a mono button and, if you use a subwoofer, whether it has the output or sub-bypass you need. | If I want to compare my dance mix in mono and through a subwoofer, I need those functions without expecting them to correct my room acoustics. Around 24% of consumers put mono and bass checks first. |
| Connections and extra listening routes | Count the stereo inputs, speaker pairs and headphone listeners you actually need; also check the connectors and whether you need USB audio. | When I connect my controller to existing equipment or need several routes, the inputs and outputs must suit my set-up. Around 18% of consumers prioritise compatibility or extra listening routes. |
Speaker volume control and headphone amplification are different functions; a passive controller won’t provide a headphone route by itself.
First check your interface’s headphone output, then check the connections and functions of the exact controller model.
According to PreSonus, the USB-C port on the PreSonus MicroStation BT is for power only, and the device won’t appear as an audio device on your computer.
Map out the route from your computer or interface to the controller and speakers before comparing connections.
Depending on your existing set-up, you may need suitable audio cables or a separate audio interface.
A small room can make it harder to judge low frequencies, whatever control options the controller offers.
Use a sub route for comparison if you have a suitable subwoofer, but also take your listening environment and other monitoring options into account.
The Mackie Big Knob Passive differs from the Studio and Studio+ models, which have USB interface functions. The PreSonus MicroStation BT and Monitor Station V2 also have different connections and listening routes.
Compare the full model name with the inputs and outputs you need.
The Big Knob Passive is a passive volume controller with controls for two sources and two pairs of monitors. The Big Knob Studio and Studio+ are separate models with USB audio functions.
The MONICON M G2 is designed for one stereo input and one stereo output. The MONICON L G2 has more outputs and a headphone output with its own volume control.
The MicroStation BT offers a headphone and aux route, plus sub-bypass. The Monitor Station V2 is designed for several pairs of speakers and separately controlled headphone routes.
The Nero is designed for more advanced monitoring set-ups, with several speaker, subwoofer and headphone routes.
The Baby RAM is a passive option with two pairs of stereo inputs and two pairs of stereo outputs, plus mute, dim and mono.
No. According to PreSonus, the USB-C port is for power, so the device won’t appear as an audio device on your computer. Check separately how your analogue audio signal reaches the controller.
First compare the audio outputs on your source or interface with the inputs on the exact model, then check the connection to your speakers. According to its product specifications, the Palmer MONICON M G2 has XLR/TRS and 3.5 mm connection options, but only one stereo output.
Not by itself. A sub-bypass can give you an extra listening comparison, but Genelec points out that the acoustics of small rooms can make it harder to judge low frequencies.
Be mindful of both the volume and the listening time, and take breaks. The World Health Organization gives 80 dB for up to 40 hours per week as an example of safe listening; this is health guidance, not a setting that every monitor controller automatically enforces.
There’s no general permission or prohibition without knowing your local authority and living situation. The Dutch government says that local authorities set their own rules on noise nuisance from neighbours, so check the rules that apply to your address.