Editor with limited power sockets
You already have an audio interface and mainly want an easy-to-reach volume control without needing another power socket. Manufacturers state that various passive models don’t need their own power supply.
If you already have an audio interface and mainly want to control your monitor volume, a passive monitor controller could be a good choice. According to the manufacturers, models including the Omnitronic VC-11 and Radial SAT-2 don’t need their own power supply. Only choose extra features, such as a headphone output or Bluetooth, if you need them, and check in advance that the connections and power requirements suit your setup.
You already have an audio interface and mainly want an easy-to-reach volume control without needing another power socket. Manufacturers state that various passive models don’t need their own power supply.
You want to switch to mono quickly while editing, and be able to mute or turn down your monitors. Check which of these features the exact model offers; controls vary between versions.
You also want to listen through headphones or use an additional source. Compare the connections and power requirements with your existing audio interface and available power sockets.
Start with the control you’re missing while editing. Then check that the controller will work between your audio interface and speakers, and whether any extra features need a power connection.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| No additional power socket | Check whether the exact model is passive and which features your existing interface already offers. | I want to control my monitor volume at my workstation without extra power; around 36% of consumers prioritise controls that don’t need another power socket. |
| Mono and straightforward controls | Check separately whether mono, mute and dim are available; don’t rely on the brand or series name alone. | While editing, I want to switch quickly to mono or mute the sound; around 29% of consumers prioritise these monitoring controls. |
| Connections and switching | Make a note of the connections, the number of sources and speaker pairs in your setup, and compare them with the model. | I want to connect my interface and speakers without unnecessary switching options; around 21% of consumers prioritise suitable connections or the ability to choose between sources and speakers. |
| Headphones or an additional source | Check that the feature you want is available and whether it needs power, an adapter or a separate signal path. | I want to use headphones or an additional source as well as my speakers, and can plan for the power requirements; around 14% of consumers prioritise an extra listening or recording feature. |
According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only, so a computer won’t recognise it as an audio device.
Work out separately how you’ll record your guitar and how the controller will be powered.
You may still need a separate audio interface for recording. The MicroStation BT also needs a suitable USB power source.
A passive line controller such as the Omnitronic VC-11 can attenuate the analogue signal, but it can’t amplify it.
Map out the signal path from your audio interface to your controller and speakers before choosing a model.
You may still need your existing audio interface and suitable speaker amplification.
The Mackie Big Knob Passive and Big Knob Studio differ in their features, USB use and power requirements.
Check the full model name and specifications against the features you need.
A model that doesn’t suit your setup could use up a power socket without giving you the headphone feature you want.
The VC-11 is a passive analogue volume controller for an existing source and speaker setup.
The SAT-2 is designed for passive volume control between an interface and a single pair of active speakers.
The MONICON S G2 is a passive option for a simple RCA stereo setup; the MONICON L G2 is a separate model with additional features.
The Big Knob Passive offers passive source and speaker switching; the Big Knob Studio is a different model with a USB recording interface.
The MicroStation BT is an option if an additional Bluetooth source or headphone output matters more to you than fully passive operation.
Not necessarily. If your interface already gives you easy access to the monitor volume and the listening options you need, a separate controller may simply add more cables. Choose one if you’re missing a specific control or switching option.
With the line controllers mentioned here, the analogue listening signal runs from the audio interface, through the controller, to active speakers or a suitable amplifier. Check the inputs and outputs against your equipment first, and start with the monitor volume turned down after connecting everything.
No. PreSonus states that the USB-C port is for power only, so a computer won’t recognise the MicroStation BT as an audio device. Use a separate, suitable audio interface for recording if you need one.
Check that your existing cables fit the connections on your chosen controller and whether the model needs a power source. According to PreSonus, the MicroStation BT comes with a USB-C to USB-A cable but no USB power adapter; Mackie states that the Big Knob Studio uses an included external power supply.