Who is a monitor controller for?

Guitar editor with one pair of monitors

Wants to adjust speaker volume directly from an adjustable desk and, when needed, listen in mono to multi-mic recordings.

Editor who switches between listening routes

Uses a pair of headphones, a second pair of speakers or a subwoofer alongside their main monitors, for example, and wants to know which routes the controller can actually switch between.

What should you look for?

Start with the controls you want within easy reach while editing, then check that the connections and listening routes work with your existing equipment.

What to consider What should you check? Who should prioritise it?
Volume and mono Check that you can reach the volume control at both desk heights, and that mono, dim and mute functions are available if you want to use them. If I want to adjust the volume quickly while editing or check a multi-mic recording in mono, these are the controls I’ll look for first. Around 36% of consumers give volume and mono top priority.
Connections Compare your interface’s line outputs with the connections on the controller and monitors. The Radial SAT-2 is designed for line-level signals, not amplified speaker outputs. If I’m putting the controller between my existing interface and monitors, I want to make sure the connections and signal levels match first. Around 29% of consumers prioritise this compatibility.
Headphones Check whether there’s a headphone output and whether its volume can be adjusted separately, if you need this. If I often switch between speakers and headphones, I want to be able to control that route directly. Around 21% of consumers give the headphone route top priority.
Additional listening routes Count the stereo outputs you need, and check separately whether you want to switch between a second pair of monitors or a subwoofer. If I use a second pair of speakers or a subwoofer alongside my main monitors, the controller needs to handle that route. Around 14% of consumers prioritise additional listening routes.

Pitfalls to avoid

  • Mistaking a monitor controller for a recording interface

    A controller can manage your listening set-up without recording audio to a computer via USB. According to PreSonus, the USB-C connection on the PreSonus MicroStation BT is for power only; the Mackie Big Knob Studio does offer USB recording functions.

    Decide whether you only need to control your listening routes or also need an interface for recording.

    If you also want to record via USB and can’t use your current interface for this, you may need a separate audio interface.

  • Assuming the right plug means it’s suitable

    A matching plug doesn’t automatically mean the signal level is right. Radial warns that a speaker-level signal can damage the SAT-2; the device also doesn’t convert an unbalanced signal to a balanced one.

    Before connecting anything, check the signal level and the inputs and outputs at both ends. Don’t connect an amplified speaker output to a SAT-2.

  • Choosing more routes than you need, or missing a route you do need

    Monitor controllers vary in the number of speaker outputs they have and how they handle a subwoofer or headphones. The Mackie Big Knob Passive switches between two pairs of monitors but has no headphone output; the PreSonus MicroStation BT has a sub bypass with one pair of main outputs.

    Map out your current and genuinely planned speaker, subwoofer and headphone routes before choosing a model.

Brands to consider

Mackie

The Big Knob Passive is designed for passive source and monitor selection, while the Big Knob Studio combines monitor control with a recording interface.

  • Mackie says the Big Knob Passive switches between two sources and two pairs of monitors, and has mono, mute and dim functions. The Big Knob Studio adds USB recording and headphone outputs.
  • The Big Knob Passive has no headphone output or USB audio interface; don’t confuse it with the Big Knob Studio.

Palmer

The MONICON M G2 is a passive controller for one pair of stereo monitors; the MONICON L G2 offers more outputs and headphone control.

  • Palmer says the M G2 has mono, dim and mute functions. The L G2 offers two stereo outputs and a separately adjustable headphone output.
  • The M G2 has one stereo output. The L G2’s additional features require power.

PreSonus

The MicroStation BT is designed for one pair of active monitors, with controls for an optional subwoofer and an additional Bluetooth source.

  • PreSonus lists a sub bypass and a headphone/aux output.
  • According to the PreSonus manual, USB-C is for power only and the device doesn’t appear on the computer as an audio interface.

Audient

The Nero is a desktop controller for set-ups with multiple monitor and headphone routes.

  • Audient specifies three stereo monitor outputs and four headphone outputs.
  • Check whether you need the extra outputs; the product specifications alone don’t make it clear whether this model will suit your desk and connections.

Radial Engineering

The SAT-2 is a passive two-channel attenuator and monitor controller for line-level signals.

  • Radial confirms that the SAT-2 can be used in mono and connected to unbalanced equipment with the appropriate cables.
  • The SAT-2 isn’t designed for speaker-level signals and doesn’t convert an unbalanced signal to a balanced one.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily. If your interface’s volume control and the outputs you need are already within easy reach, a separate controller may not add much. Consider one if you want to control volume, mono or switching between listening routes directly from your desk.

Is USB-C on the PreSonus MicroStation BT a computer audio connection?

No. According to PreSonus, USB-C on the MicroStation BT is for power only and doesn’t work as an audio connection to a computer.

What should I consider when connecting it at a sit-stand desk?

Check that your source’s line outputs match the controller’s inputs, and that its outputs are compatible with your monitors. Also plan where to place the control and allow enough cable slack for both desk heights.

Can I connect a Radial SAT-2 to an amplified speaker output?

No. Radial states that the SAT-2 is designed for line-level signals and that a speaker-level signal could damage the device.

Is CE marking automatically required for every monitor controller?

Not simply because a device is called a monitor controller. According to the Dutch government’s business information portal, the requirements that apply depend on the product group and configuration; Bluetooth devices may also be subject to radio equipment rules. So check the conformity information for the specific model.