Who might need a monitor controller?

Guitar editor with one pair of speakers

This user wants to control playback volume from their desk and check stereo edits in mono too. Bax Music describes a simple set-up with one audio source and one pair of studio monitors; Behringer lists mono and mute as features of the MONITOR1.

Mixer with two monitoring sets

This user wants to switch between two pairs of speakers and set the levels accordingly. Mackie specifies that the Big Knob Passive can switch between two sources and two monitor pairs.

Recording engineer with a musician on headphones

This user may need a separate headphone or cue route during recording. PreSonus describes separate headphone outputs with individual level controls and a Main/Cue selection for the Monitor Station V2.

What should you look for?

First, count your audio sources, speaker pairs and headphone listeners. Your two computer monitors connect separately to your computer and don’t determine how many audio outputs you need.

Consideration What should you check? Who is this important for?
Volume control Check whether your interface already offers this, and whether the controller’s inputs and outputs are compatible with your audio connections. If you want to adjust the level from your workstation while editing, direct control is likely to be your main priority. Around 40% of consumers prioritise volume control.
Mono checking Look for a mono switch on the exact model; a separate mono output is not the same thing. If you want to assess stereo edits as a mono signal too, a mono switch is useful. Around 30% of consumers prioritise mono checking.
Audio routing Count the sources and speaker pairs you’ll actually connect, then check how many inputs and outputs you need. If you have multiple audio sources or speaker pairs and want to switch between them, routing is the deciding factor. Around 20% of consumers prioritise switching between audio routes.
Headphones or cue Check the number of headphone outputs, separate level controls and whether you can switch between Main and Cue. If you’re working with a musician who needs to listen separately, you may need a dedicated headphone or cue route. Around 10% of consumers prioritise separate headphone monitoring.

Common buying mistakes

  • Confusing two computer monitors with two pairs of speakers

    Display settings and audio monitor routing are separate things. Extra speaker outputs won’t help if you don’t use them.

    Before you buy, count the audio sources, speaker pairs and headphones you’ll actually use.

  • Mistaking a passive volume controller for a recording interface

    Mackie doesn’t specify a USB interface for the Big Knob Passive. The Big Knob Studio is a different model, with USB recording and microphone preamps.

    Check the full model name and whether your existing interface handles recording.

    For guitar recording, you’ll still need a suitable audio interface if your current set-up doesn’t already provide that function.

  • Counting connections without checking what they do

    According to the manufacturer, the alternative input types and output types on the Behringer MONITOR1 aren’t designed for simultaneous use.

    Map out your signal path and compare the connectors at both ends before choosing a model.

    If the connectors don’t match, you may need a different type of audio cable.

Brands to compare

Mackie

The Big Knob Passive is designed for two sources and two pairs of speakers.

  • Mackie specifies mono, mute and dim switching functions.
  • According to the model specifications, the Big Knob Passive has no headphone output or USB interface.

Behringer

The MONITOR1 is designed for volume control, mono and mute functions with one pair of speakers.

  • Behringer specifies XLR/TRS combo inputs and XLR outputs, as well as alternative 3.5 mm connections.
  • According to Behringer, the alternative input and output types can’t be used at the same time. The model doesn’t offer the speaker-pair switching available on the Big Knob Passive.

Drawmer

The CMC2 is an active controller for two stereo speaker pairs, a subwoofer route and one headphone output.

  • Drawmer specifies mono, phase reverse, dim and mute.
  • Drawmer’s claims about transparency and accuracy are manufacturer claims, not the result of an independent comparison with other models.

PreSonus

The Monitor Station V2 is designed for multiple speaker pairs, plus headphone and cue control.

  • PreSonus specifies three stereo speaker outputs and four headphone outputs, each with its own level control and Main/Cue selection.
  • Those extra routes won’t necessarily be useful if you work alone with one pair of speakers and one listener.

Palmer

According to Palmer, the MONICON XL offers connections for three speaker pairs and a mono output.

  • Palmer also lists two headphone outputs and a correlation meter.
  • The correlation meter isn’t a substitute for listening to the mix in mono, and it can’t guarantee how a guitar mix will translate.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need to connect your two monitors to the monitor controller?

No. An audio monitor controller manages audio signals going to your monitoring equipment. Connect your computer monitors using the appropriate ports on your computer or dock. Microsoft Support explains Windows display settings separately. Also check which audio output your DAW uses.

Can you use a passive monitor controller instead of your audio interface for guitar recording?

Not if all you need is volume control. Mackie doesn’t specify a USB interface for the Big Knob Passive, while the Big Knob Studio is a different model with USB recording and microphone preamps. Check which recording features the exact model offers.

How do you connect a controller and keep it clean?

Compare the output of your audio interface with the input on the exact controller model, then check that its outputs match your speakers. Follow the manual for maintenance; Mackie says to clean the Big Knob Passive using only a dry cloth.

What can you do if your monitor controller develops a fault after purchase?

For a faulty product, the seller is responsible for providing a solution, according to the Dutch Government. There’s no fixed statutory warranty period in the Netherlands; what you can reasonably expect from the product depends, among other things, on the product itself and the information provided at the time of purchase. A manufacturer’s warranty may provide additional cover.

Which safety rules apply to a monitor controller?

Check the product information for the specific device and the relevant safety requirements. Business.gov.nl, the Dutch government’s business portal, says that businesses placing electrical or electronic equipment on the market or trading in it are responsible for complying with the applicable European rules.