Who can benefit from a monitor controller?

Mixing on your own with one pair of monitors

If you mostly mix on your own, an easy-to-reach volume control and quick mono switching can be useful. First, check whether your audio interface already offers these features in a practical way.

Comparing listening setups

If you want to switch between pairs of monitors or between stereo and mono, check how many outputs and switches each model provides.

Recording a musician

For recording sessions, separate headphone controls, a cue signal or talkback may be important. Check the routing available on the specific model.

What should you look for when choosing one?

Start with the features on your existing interface. A separate controller is most useful when you need physical controls or connections that your current setup doesn’t have.

What to consider What should you check? Who is this important for?
Volume and mono Check for a physical volume control and, if you need them, separate mono and dim switches. If I want to adjust the volume quickly while mixing and check in mono, I want those controls close to hand. Around 36% of consumers prioritise direct volume control and mono monitoring.
Monitor pairs and sources Count the number of stereo monitor outputs and source inputs you actually need. I want to switch between monitor pairs or sources to compare my mix. Around 29% of consumers prioritise switching between listening setups or sources.
Headphones and talkback Check the number of headphone outputs, independent level controls, and the cue and talkback routing available. When I’m recording a musician, I want to adjust their headphone mix separately and communicate via talkback if needed. Around 21% of consumers prioritise headphone routing while recording.
Subwoofer and extra source Check for a dedicated subwoofer output and the right analogue connections; find out what the USB-C port is for. If I use a subwoofer or an extra playback source, I want to know how it connects to my setup and how it’s controlled. Around 14% of consumers prioritise subwoofer or extra-source routing.

Common buying mistakes

  • Assuming a large volume knob makes it a complete monitor controller

    Features vary by model. Behringer’s product specifications describe the MONITOR1 as a volume controller with mute; Mackie also lists mono, dim and source and monitor-pair switching for the Big Knob Passive.

    Make a note of the switches you actually want alongside the volume knob, then check that they’re included on the exact model you’re considering.

  • Confusing a subwoofer output with a second stereo monitor output

    PreSonus specifies one pair of stereo main outputs and a separate subwoofer output for the MicroStation BT. So the subwoofer output isn’t a second stereo monitor pair.

    Count stereo monitor pairs and subwoofer channels separately before choosing a model.

  • Assuming the MicroStation BT’s USB-C port carries audio

    According to PreSonus’s connection instructions, USB-C on the MicroStation BT is for power only. The power adapter isn’t included.

    Check how to connect your audio interface and which power supply and cables your setup needs.

Brands to consider

Mackie

The Big Knob Passive is designed for physical source and monitor switching, while the Big Knob Studio adds recording and headphone features. They are different models.

  • Mackie says the Big Knob Passive supports two sources and two pairs of monitors.
  • The Big Knob Passive has no headphone output. The Big Knob Studio has two independently controlled headphone outputs and built-in talkback.

Behringer

The passive MONITOR1 is designed for a simple setup, with volume control and mute.

  • Behringer lists XLR/TRS combo inputs and XLR outputs.
  • Don’t assume it has mono, dim or second-monitor-pair controls; check which features the model actually offers.

PreSonus

The MicroStation BT is designed for one pair of stereo monitors, with additional subwoofer control and Bluetooth as a playback source.

  • PreSonus lists balanced TRS line connections, a subwoofer output and Sub Bypass.
  • According to PreSonus, USB-C is for power only; the power adapter isn’t included.

Palmer

The MONICON XL is designed for setups that need multiple monitor pairs and separate level control.

  • Palmer specifies three speaker outputs, two headphone outputs and a mono output for a subwoofer or mono monitor.
  • These connections and features apply to the MONICON XL; check each model individually.

Audient

The Nero is designed for setups with multiple sources, monitor pairs and headphone listeners.

  • Audient specifies three stereo speaker outputs, four headphone outputs, talkback, and mono, dim and polarity controls.
  • Check whether you need this extensive routing for your home studio setup.

Related products

Related products coming soon.

Frequently asked questions

Do I always need a monitor controller as well as my audio interface?

No, not if your interface’s controls and monitoring features already meet your needs. A separate controller can be useful if, for example, you want direct control over mono, multiple monitor pairs or a cue mix.

Can I connect the MicroStation BT via USB-C as an audio interface?

No. According to PreSonus, USB-C on the MicroStation BT is for power only. Connect your audio interface using suitable audio inputs, and bear in mind that the power adapter isn’t included.

How should I keep a monitor controller clean, and what should I bear in mind when using one?

Mackie recommends using a dry cloth for the Big Knob Passive and warns against using it near water. Keep your monitoring volume at a sensible level, too: Arboportaal notes that excessive noise levels can cause hearing damage. This is usage and safety information, not a general legal volume limit for a private home office.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

If a product is faulty, the seller must provide a solution; according to the Dutch government, the Netherlands has no fixed statutory warranty period. For many online purchases from a business, a 14-day cooling-off period applies, subject to relevant terms and exceptions.