Who needs a monitor controller?

Mixer using one pair of monitors

You mix at a single desk with one pair of active speakers and mainly want direct control of your listening volume.

Mixer comparing monitoring setups

You want to check your mix in mono or quickly switch between two pairs of speakers and sources.

Mixer with a sub or shared monitoring setup

You use a subwoofer that you want to control separately, or need extra headphone outputs. Check which of these features each model offers.

What should you look for?

Start with the controls your existing interface doesn’t offer, or doesn’t make convenient to use. Choose extra monitoring and recording routes only if your setup needs them.

What to consider What to look for Who should prioritise this?
Volume and connections Compare your interface’s line outputs with the controller’s inputs and outputs. Also check whether you need mono or mute. Palmer specifies one stereo RCA input and output for the MONICON S G2 G. If my main priority is easy volume control, the connections need to suit my interface and active speakers. Around 31% of consumers prioritise direct volume control and compatible connections.
Mono and A/B monitoring Count your sources and pairs of speakers separately, and check for mono, mute and dim controls. Mackie specifies two sources, two monitor pairs, and mono, mute and dim for the Big Knob Passive. If I want to check my mix in mono or compare two sets of speakers, those switching options matter more than extra outputs I won’t use. Around 31% of consumers prioritise this kind of mix comparison.
Separate subwoofer control Check whether the model has a separate sub output and sub bypass. PreSonus specifies these features for the MicroStation BT. With a 2.1 setup, I want to be able to listen with and without the sub. Around 23% of consumers prioritise separate subwoofer control.
Headphones and recording Check the number of independent headphone controls, talkback and USB audio separately. Mackie specifies two headphone outputs with independent level controls, talkback and a 2x2 USB interface for the Big Knob Studio; the USB-C connection on the PreSonus MicroStation BT is for power only. If I’m working with someone else or want to record through the controller, the exact model needs to offer the monitoring or recording routes I need. Around 15% of consumers put these features first.

Common buying mistakes

  • Assuming a passive volume controller is a complete audio interface

    Mackie distinguishes between the Big Knob Passive, which has no USB interface or headphone outputs, and the Big Knob Studio, which does have a USB interface and two headphone outputs.

    Make a note of the recording and monitoring routes your current equipment already offers, then check the exact model.

  • Confusing a subwoofer output with switching between two stereo pairs

    The PreSonus MicroStation BT has a sub output and Sub Bypass; the Mackie Big Knob Passive is designed for switching between two pairs of monitors. These are different features.

    Decide whether you mainly want to switch off the sub or switch between two complete sets of speakers.

  • Checking only the connection and forgetting about signal level

    Radial states that the SAT-2 is designed for line-level signals. Connecting it to a speaker-level output can damage its circuitry.

    Check the manuals for your interface, controller and speakers to confirm both the connections and the signal path.

Brands to compare

Mackie

The Big Knob Passive is designed for switching between analogue sources and speakers; the Big Knob Studio is a separate model with a USB interface and recording outputs.

  • Mackie specifies two sources, two monitor pairs, and mono, mute and dim for the Big Knob Passive.
  • According to Mackie, the Big Knob Passive has no USB interface or headphone outputs. Don’t assume it has the features of the Studio model.

Palmer

The MONICON S G2 G is designed for a compact setup with one stereo source and one pair of active speakers.

  • Palmer specifies passive volume control and mono via stereo RCA.
  • The single stereo input and output don’t allow you to switch between two pairs of speakers. Check that the RCA connections suit your equipment.

PreSonus

The MicroStation BT is designed for a compatible 2.1 setup, with a switchable sub and Bluetooth source.

  • PreSonus specifies a sub output and Sub Bypass.
  • According to PreSonus, the USB-C connection is for power only and doesn’t work as an audio interface.

Radial Engineering

The SAT-2 is designed for analogue volume control at line level between an interface and a pair of active speakers.

  • Radial specifies passive control with mono, mute and dim.
  • Radial warns that speaker-level signals can damage the circuitry. Check the signal level of your connection.

Audient

The Nero offers multiple speaker, sub and headphone outputs for a more comprehensive monitoring setup.

  • Audient specifies three stereo speaker outputs, an assignable sub and four headphone outputs.
  • If you use one pair of speakers and only need volume control, you may not need the extra outputs.

Related products

Related products coming soon.

Frequently asked questions

Do I need a monitor controller as well as my audio interface?

Not necessarily. If your interface already offers easy-to-reach volume control and the monitoring outputs you need, first work out which controls are missing. A separate controller can add features such as direct volume control, mono monitoring or switching between pairs of speakers.

How do I connect a simple monitor controller?

Choose a controller that fits into the analogue line-level signal path between your interface and active speakers. Radial describes this connection for the SAT-2; don’t use this model with an amplified speaker-level output. For other models, check the relevant manual.

Does the USB-C connection on every monitor controller work as an audio interface?

No, it varies by model. PreSonus states that USB-C on the MicroStation BT is for power only; Mackie specifies USB recording and playback for the Big Knob Studio. Check what the connection does on the exact model you’re considering.

What rights do I have as a Dutch consumer when buying online?

For an applicable online purchase from a business, the Dutch government generally allows a 14-day cooling-off period. The rules described for distance selling don’t apply in the same way to an online purchase from a private individual. You’re also entitled to a product that meets reasonable expectations. The Netherlands has no fixed statutory guarantee period, and the seller is your point of contact if there’s a problem.

What should I check for an electrical or Bluetooth model?

Check which product rules and documentation apply to the exact model. Business.gov.nl explains that the Radio Equipment Directive is also relevant for equipment with Bluetooth, and refers to an EU declaration of conformity for equipment covered by these requirements. A CE mark is not a sound quality certification.