Who is a monitor controller for?

Solo mixer with one stereo pair

You want to adjust your listening volume directly and, for example, hear guitar and vocals in mono, without buying extra pairs of speakers.

Mixer with multiple listening routes

You switch between sources or pairs of speakers, or need a separate headphone or subwoofer route. Count the inputs and outputs you need before choosing a model.

What should you look for when choosing one?

Start with the controls that aren’t already easy to reach on your interface. Then check that the connections and any extra listening routes suit your set-up.

What to consider What should you check? Who is this important for?
Direct control Check whether each model has the volume knob, mute and mono functions you want. Also see what your interface already offers. If you want to adjust the volume quickly or listen in mono while mixing, physical controls can be handy. Around 36% of consumers prioritise direct volume or mono control.
Connections and space Make a note of the connectors on both sides and measure the available space, including room for cables. If desk space is limited, you’ll want a controller that fits into your existing signal chain without getting in the way. Around 29% of consumers prioritise compatible connections and a small footprint.
Sources and speaker pairs Count stereo sources and selectable speaker pairs separately; a subwoofer output doesn’t automatically count as a second pair. If you genuinely want to switch between sources or monitor pairs, check which switching options the model offers. Around 21% of consumers prioritise comparing additional listening routes.
Headphones or subwoofer Check whether your interface already has a suitable headphone output and whether you can control the route you want separately. If you want to listen through headphones separately or switch off a subwoofer, check that the model has the specific route you need. Around 14% of consumers prioritise a separate headphone or subwoofer route.

Common buying mistakes

  • Buying a controller for features your interface already has

    The benefit depends on which controls and connection routes are missing from your existing set-up.

    Map out your current signal path first, then buy only the controls or switching options you’re actually missing.

    An extra device also takes up desk space and needs extra connections.

  • Assuming every compact controller has the same features

    The Palmer MONICON S G2 has one stereo RCA route with mono, while the Mackie Big Knob Passive can switch between two sources and two monitor pairs. Mackie says that model doesn’t have its own headphone output.

    Compare the connections and controls on the exact model, not just the product category.

  • Confusing USB-C power with USB audio

    PreSonus states that the MicroStation BT’s USB-C connection is for power only and won’t appear as an audio device on your computer.

    Check separately how audio is connected and what each port is designed for.

Brands to consider

Palmer

The MONICON S G2 is a compact passive volume controller for one stereo route.

  • Palmer specifies one stereo RCA input and one stereo RCA output. The unit measures 86 × 39 × 66 mm and has a mono function.
  • The specified route doesn’t let you switch between two pairs of speakers. Check that RCA connections are suitable for your equipment.

Behringer

The MONITOR1 is designed for direct volume control and mute, with a range of analogue connection options.

  • Behringer lists XLR/TRS combo inputs and XLR outputs.
  • Check the cabling for your signal path and the exact model.

Mackie

The Big Knob Passive combines passive volume control with source and monitor-pair selection.

  • Mackie lists selection of two sources and two monitor pairs, plus mono, mute and dim functions.
  • This model isn’t listed as having a USB audio interface or its own headphone output.

PreSonus

The MicroStation BT and Monitor Station V2 are designed for different types of listening set-up.

  • The MicroStation BT has a subwoofer bypass. According to PreSonus, the Monitor Station V2 has four headphone outputs with Main/Cue selection.
  • According to PreSonus, the MicroStation BT’s USB-C connection is for power only, not computer audio.

Audient

The NERO is designed for set-ups with multiple speaker and headphone routes, plus talkback.

  • Audient specifies three stereo speaker outputs, four headphone outputs and talkback.
  • The stated dimensions are 255 × 75 × 155 mm. Compare the extra routes and desk space required with your own set-up.

Joybuy products

Related products coming soon.

Frequently asked questions

How do I connect a passive monitor controller?

Check that your audio interface’s output is compatible with the controller’s input, and that the controller’s output connects to your active speakers. Palmer says the MONICON S G2 has RCA inputs and outputs; Behringer lists XLR/TRS combo inputs and XLR outputs, among other connections, for the MONITOR1. Check the connectors and signal type before choosing cables.

Can the PreSonus MicroStation BT replace my audio interface via USB-C?

No. PreSonus says the MicroStation BT’s USB-C connection is for power only and won’t appear as an audio device on your computer.

What should I check if I switch routes while listening?

Start with the listening volume turned down and check which output each switch controls. According to PreSonus, mute, Main Out On/Off and Sub Bypass have different functions on the MicroStation BT.

What are the rules on warranties and online returns in the Netherlands?

Consumer purchases in the Netherlands are covered by a statutory guarantee, with no fixed statutory guarantee period. What you can expect from a product depends, among other things, on the product and normal use. The Dutch government states that a 14-day cooling-off period applies to many distance purchases, with some exceptions. Check the terms that apply to your specific purchase.

Does a monitor controller need a CE marking?

A CE marking is required when the applicable harmonised EU rules stipulate that it is needed for the product in question; it isn’t automatically required for every type of product. Check which rules and documentation apply to the exact model. The European Commission explains that the manufacturer is responsible for the conformity assessment and marking.